What is the maintenance and replacement cycle for the Trumpchi GA4?

1 Answers
VanCourtney
07/30/25 12:49am
The Trumpchi GA4 vehicle generally requires maintenance every 5,000 kilometers. If the car is not used frequently and does not reach 5,000 kilometers in a year, it is recommended to perform maintenance every six months. This is because fluids such as engine oil, coolant, and brake fluid have a shelf life and can deteriorate if not used for a long time. Owners can also refer to the vehicle's user manual (maintenance manual), which provides detailed instructions. Follow the maintenance schedule specified in the manual. The replacement intervals for car parts are as follows: 1. Air filter: Replace every 20,000 kilometers. 2. Fuel filter: Replace every 10,000 kilometers. 3. Cabin air filter: Replace every 20,000 kilometers. 4. Brake fluid: Replace every 40,000 kilometers. 5. Spark plugs: Replace every 50,000 kilometers. 6. Timing chain: Replace every 80,000 kilometers. 7. Antifreeze: Replace every 20,000 kilometers. 8. Brake fluid: Replace every 40,000 kilometers.
Was this review help?
12
5
Share
More Forum Discussions

Does the film provided by 4S stores come with a warranty?

4S stores do not provide a warranty for the film they offer. Here is an introduction to vehicle film: 1. Introduction: Car film is a thin layer applied to the front and rear windshields, side windows, and sunroof of a vehicle. This layer is also known as solar film or heat-insulating film. 2. Function: Its main purposes are to block ultraviolet rays, reduce heat, prevent injuries from shattered glass, and reduce glare. Additionally, the one-way transparency feature of solar film helps protect personal privacy. 3. Thickness: Automotive heat-insulating film typically has a thickness of about 1.5 mil. Mil is an imperial unit, where 1 mil equals one-thousandth of an inch, or 0.0254 mm.
15
0
Share

How to Match the Throttle Cable on a 7th Generation Accord?

Turn the ignition key on and off several times in succession, and the vehicle's computer will erase the memory of the original throttle and store the data of the new throttle; Start the vehicle, and if it operates normally, the matching is complete.
2
1
Share

What Are the Reasons for High Fuel Consumption While Driving?

Low tire pressure: When the tire pressure is too low, it's like riding a bicycle with flat tires—it's hard to pedal. The same goes for cars. This not only increases fuel consumption but also poses many safety hazards, especially when driving on highways, where low tire pressure can easily lead to blowouts. Air filter clogging: Replacing the air filter can help. If the air filter is not cleaned for a long time, dust accumulates, reducing the engine's air intake and preventing fuel from burning completely, which increases fuel consumption. In severe cases, it can even affect the engine's lifespan. Engine carbon buildup: Over time, some carbon buildup is inevitable in the engine. Frequent driving in congested areas or at low speeds can easily lead to excessive carbon deposits. Too much carbon buildup can reduce engine power and increase fuel consumption. It's advisable to check the engine's carbon buildup condition.
8
1
Share

Does Audi have automatic transmission cars?

Audi has automatic transmission cars. Below is an introduction to automatic transmission: 1. Automatic transmission: An automatic transmission does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L. Driving an automatic transmission car only requires the use of the parking gear (P), reverse gear (R), neutral gear (N), and drive gear (D) to fully meet the needs of general driving. However, in some special driving environments, other functional gears may be needed. Choosing the correct control method can make an automatic transmission car perform better than a manual transmission car. 2. Automatic principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, automatic transmissions consume more than 10% higher fuel than manual transmissions. Whether manual or automatic, the more gears there are, the more fuel-efficient the transmission is.
18
3
Share

How Many Horsepower is a Diesel Engine 180?

A diesel engine 180 is approximately 244 horsepower. Below are the detailed explanations of engine power units: 1. Power: Power refers to the work done by an object per unit time. The higher the power, the higher the rotational speed, and the higher the maximum speed of the car. Maximum power is commonly used to describe the dynamic performance of a car. 2. Horsepower: Maximum power is usually expressed in horsepower (PS) or kilowatts (kW), with 1 horsepower equal to 0.735 kilowatts. 3. Torque: An important parameter of engine performance, torque refers to the average moment output from the crankshaft end when the engine is running. The greater the torque, the greater the engine output, and the faster the crankshaft speed changes, improving the car's climbing ability, starting speed, and acceleration. Maximum torque generally appears in the medium to low speed range of the engine, and as the speed increases, the torque will decrease. The unit of torque is Newton-meter (N·m) or kilogram-meter (Kg·m).
4
2
Share

How to understand the high and low beam questions in Subject 4?

If the road is poorly lit at night but there are streetlights or other light sources, do not use high beams; use low beams first. When there are no surrounding lights and visibility is poor in the distance, promptly switch to high beams. When driving on roads with poor lighting conditions and frequent oncoming traffic, you can alternately flash high and low beams to avoid affecting other drivers.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.