What is the mailing process after passing Subject 4?

How to Turn On the Rear Air Vents in the X-Trail?

To activate the rear air vents in the X-Trail, simply set the air conditioning system to horizontal airflow mode, then open the rear vents. The vertical knob next to the rear vents can be adjusted to control airflow. If the airflow from the rear vents is insufficient, you may close the front vents for better distribution. Additional details are as follows: 1. The air vents in the Nissan X-Trail are located below the center console display. The air conditioning controls allow adjustment of temperature, fan speed, and circulation mode. 2. The X-Trail's air conditioning system features button controls. The rotary knobs on either side of the console adjust temperature - clockwise to increase and counterclockwise to decrease. 3. An auto climate control button is positioned in the middle of the air conditioning panel. When activated, it automatically maintains the cabin temperature. 4. While the car's air conditioning improves cabin comfort, it's recommended to avoid prolonged use during idling, especially in hot summer conditions. At idle, the engine may experience incomplete fuel combustion, potentially leading to dangerous carbon monoxide buildup inside the vehicle over time.

1

3

Share

How to Write the Evaluation for Subject 3 Driving Test?

Simply sign your name, no need to fill in any additional information. Below are extended details: 1. Examiner's responsibilities: Examiners should conscientiously fulfill their duties, strictly adhere to examination regulations, and accept public supervision. Before the test, they should introduce themselves, explain the test requirements, and verify the applicant's identity. During the test, they must strictly follow the examination procedures and evaluate the test results based on the test items and standards. After the test, they should announce the results on the spot and explain the reasons for any failures. 2. Signing after the test: The score sheet for each subject must be signed by both the applicant and the examiner. Unsigned score sheets will not be eligible for the issuance of a motor vehicle driver's license. Examiners, test assistants, supervisors, and examination venue staff must strictly comply with examination discipline and must not endorse passing scores for individuals who do not meet the motor vehicle driving license requirements, have not taken the test, or have failed the test.

18

2

Share

What is the difference between the Volkswagen DJM and EA211 engines?

ea211 engine does not refer to a specific engine model, but rather to a series of engines. The ea211 engine series includes many different models, such as djm, din, css, and cst. Therefore, the djm engine is one of the models within the ea211 series. The differences between them are as follows: 1. djm engine: The djm engine is a naturally aspirated engine with a maximum power of 83kw and a maximum torque of 150 Nm. This engine can be found in models such as the Santana, Jetta, Bora, and Lavida. 2. ea211 engine: The ea211 engine series includes 1.4L turbocharged and 1.2L turbocharged engines. The 1.4L turbocharged engine comes in both high-power and low-power versions.

10

1

Share

How long does it take to receive a replacement license plate from 12123?

12123 will process the replacement license plate application within one working day, and it takes about three working days to produce the plate. The delivery time depends on the distance of the address, so the entire process takes at least seven working days to receive the plate. Below is an introduction to the replacement and reissuance of license plates: 1. Required documents: The procedures for both are quite similar, and even the same form is used, but the terms are different, which changes the nature of the process. 2. Processing time: Both take about a week to receive the new license plate. Reissuance means getting the same license plate number as before, while replacement means getting a different license plate number. 3. Procedure: The process for both is the same, but for replacement, you also need to bring the original license plate, the owner's original ID card and a copy, the vehicle registration certificate, and the application form for replacement or reissuance of the motor vehicle license plate. After submitting the application at the vehicle management office and providing the necessary documents, the new license plate can be received within a week after the office officially accepts the application.

10

0

Share

What does retardation mean?

Retardation refers to maintaining a decelerated state without needing to press the brake during downhill driving. Below are relevant introductions about retarders: 1. Introduction 1: The retarder serves as an auxiliary device to the braking system, mainly applied in buses over 5 tons and trucks over 12 tons. For vehicles frequently operating in mountainous or hilly areas, it enables sustained speed reduction or stable speed maintenance during long descents while alleviating or eliminating the load on service brakes. 2. Introduction 2: Based on different working principles, retarders can be categorized into engine retarders, hydraulic retarders, electric turbo retarders, motor retarders, and aerodynamic retarders. According to the form of braking torque application, they can be divided into primary retarders (acting on the front end of the transmission) and secondary retarders (acting on the rear end of the transmission).

2

1

Share

How Many Liters of Engine Oil Does the Classic Sylphy Require?

The Classic Sylphy requires 3 liters of engine oil, specifically the original 5W30 grade oil. Between the 5W30 and 0W20 grades, the Sylphy tends to favor 5W30 due to its better low-temperature fluidity, making it suitable for lower temperature environments. The viscosity of engine oil changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the vehicle. The latter number represents the oil's kinematic viscosity at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be interpreted as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the Classic Sylphy is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and collect the old oil in a pan until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Use a specialized wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the filler cap on the engine's valve cover, typically filling up to three-quarters of the oil bottle; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.

14

4

Share

What is the mailing process after passing Subject 4?

How to Turn On the Rear Air Vents in the X-Trail?

How to Write the Evaluation for Subject 3 Driving Test?

What is the difference between the Volkswagen DJM and EA211 engines?

How long does it take to receive a replacement license plate from 12123?

What does retardation mean?

How Many Liters of Engine Oil Does the Classic Sylphy Require?

How to Replace the Battery in a Citroën Key?

Where is the drainage outlet of the Lavida car door?

Where is the Chevrolet Spark's cabin air filter located?

Does a White Car Showing Black Indicate Exposed Primer?