What is the m3p car?

1 Answers
IanLee
07/29/25 9:54pm
m3p refers to the Tesla Model 3 Performance. Below is an introduction to the Tesla Model 3: 1. Powertrain: The Tesla Model 3 is a mid-size sedan equipped with a pure electric 275-horsepower motor. The motor has a maximum output of 275 PS, with a total power of 202 kW and a total torque of 404 Nm. It features a single-speed electric transmission, a top speed of 225 km/h, and a rear-wheel-drive configuration. 2. Dimensions: The car measures 4694 mm in length, 1850 mm in width, and 1443 mm in height, with a wheelbase of 2875 mm. It is a 4-door, 5-seater sedan.
Was this review help?
8
5
Share
More Forum Discussions

What does 16*3.0 tire mean?

3.0 is the width of the tire. 16 is the diameter of the tire, which means it is a 16-inch tire. The tire specification 3.00-10 indicates a diameter of 30 cm and 10 layers of thickness. The 3.00-10 imperial specification refers to a 3.00 cross-section width: 3.00X25.4, which is 76.2 mm in cross-section width, and a 10-inch inner diameter. The hyphen (-) indicates a bias-ply tire. Example: If a motorcycle tire specification is 205, 65, R17, 92V, here is the detailed explanation of its meaning: 1. 205: The 205 refers to the width of the motorcycle tire, which is 205 mm. 2. 65: The 65 refers to the aspect ratio, meaning the sidewall height is 65% of the tire height. 3. R17: The R indicates a radial tire, and 17 is the rim diameter in inches. 4. 92V: The 92 refers to the load index, which means 92 multiplied by 4, indicating it can withstand a pressure of 368 kg. The V refers to the speed rating, which can reach up to 240 km/h.
6
4
Share

Buick Verano Tire Specifications

Buick Verano tire specifications are 205/55R16. The first number 205 indicates the tire width is 205MM, 55 represents the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 16 indicates the rim diameter is 16 inches. The Buick Verano has a top speed of 210km/h and accelerates from 0-100km/h in 7.7 seconds. In addition to the specifications, the following common data is also marked on the tires: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specifications: Indicates the rim specifications compatible with the tire for practical use, such as "Standard Rim 5.00F".
9
5
Share

Can Modified Laser Headlights Pass the Annual Inspection?

After modifying a vehicle, it must be registered with the vehicle management office to pass the annual inspection. Below are the relevant details about the annual inspection: 1. Conditions: Vehicles whose condition does not match the records on the driving license or registration file, or whose license plates or driving licenses are damaged, incomplete, illegible, or self-made. 2. Notes: The exterior of the vehicle cannot be modified. The color of the glass sun film or explosion-proof film cannot be too dark (items inside the vehicle must be clearly visible from one meter away; mainly applies to vans and trucks, but not to small cars with fewer than 5 seats). Vans and trucks must have enlarged rear license plates, and the number of spring leaf plates cannot be increased or decreased. The number of seats in a van cannot be altered, and a fire extinguisher is required. The cargo compartment of a box truck cannot be modified (no side doors, no roof openings, no tailgate additions). The size of the tires cannot be changed, and the tread patterns of tires on the same axle must be consistent. Vehicles with unresolved traffic violations or those impounded by the court cannot undergo the annual inspection.
20
0
Share

Is it necessary to install a 360-degree panoramic camera?

It is essential to install a 360-degree panoramic camera for your car, especially as the rearview assist significantly improves parking. Here are some maintenance tips for the imaging system: 1. Replace with suitable antifreeze: Some car owners prefer using tap water instead of antifreeze during summer, which is highly inadvisable. As temperatures drop in autumn, failing to switch to automotive-specific antifreeze can severely impact the cooling system if sudden cold snaps occur. Therefore, if tap water is currently in use, it should be replaced immediately. 2. Inspect the intake system and battery: During autumn, regularly check the valves for carbon buildup and visit a service station for inspection and repairs if needed. The battery terminals are particularly prone to issues in autumn. If green oxidation is found on the terminals, rinse it off with boiling water, as this oxidation can lead to insufficient charging, battery drain, or even complete failure, making the car unable to start. 3. Frequent brake system checks: Ensure the brake fluid is at the proper level and top up or replace it as necessary. Regularly inspect the braking system for any weakening, pulling to one side, or changes in pedal resistance. If needed, clean the entire brake system's piping. Check the windshield defroster function. As autumn brings cooler temperatures, frost may form. Pay special attention to whether the defroster vents under the windshield are functioning correctly and providing adequate heat. Address any issues promptly.
18
5
Share

Where is the cabin air filter located in a 2017 Peugeot 308?

The cabin air filter in the 2017 Peugeot 308 is located beneath the right front windshield, positioned between the rain gutter and the engine firewall. When driving with the air conditioning on, the system draws outside air into the vehicle cabin. However, this air contains various particles such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. Without the cabin air filter's filtration, these particles entering the cabin would not only contaminate the air conditioning system and reduce cooling performance, but also cause allergic reactions, lung damage, ozone-induced irritation, and odor-related discomfort - all of which compromise driving safety. Steps for replacing the cabin air filter: 1. Turn off the engine (do not start the vehicle). 2. Locate the engine hood release lever at the lower left of the driver's footwell, lift it to release the primary latch, then open the secondary latch to raise the hood. 3. Secure the hood with the support rod. 4. Using a 10mm wrench, remove the three to four bolts securing the right front windshield rain gutter cover near the engine firewall. 5. After removing the protective cover, the hidden cabin air filter will be visible. 6. Remove the old filter and install the new one. 7. Reassemble components in reverse order of removal.
18
2
Share

Is It Normal for Car Antifreeze to Run Low?

No, it is not normal. When the car antifreeze level falls below the minimum mark, it should be promptly refilled or replaced. Antifreeze Replacement Method: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way hose. The five-way hose is named for its five connections to various parts of the car. Antifreeze flows through the five-way hose and is then distributed to different parts of the car to perform its function. If there is any leakage of antifreeze in this area, the hose should be replaced or the connections re-secured as needed. Drain the old antifreeze, then flush the fluid channels with clean water. Add clean water to the antifreeze reservoir and continue to fill it until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water coming out of the reservoir may have a faint pink color. Continue adding clean water until the water runs clear. Remember to remove the heater hose to drain all water from the heater core. Function of Antifreeze: Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion year-round.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.