What is the Lynk & Co car series?

1 Answers
LaLandon
07/29/25 8:24pm
Lynk & Co is a domestic car series, a high-end independent brand established by Geely Auto Group. Lynk & Co utilizes Volvo's technology and is designed and developed by Geely Auto's European R&D Center. In terms of exterior design, it highlights the avant-garde style of Lynk & Co vehicles, with LED daytime running lights and headlights complementing each other to create a sense of grandeur and stability. The Lynk & Co 01 is the first model of the Lynk & Co brand. In terms of appearance, the new Lynk & Co 01 can be seen as a mid-cycle facelift of the original Lynk & Co 01. Compared to the older version, the new model narrows the vertical width of the grille, with an internal design resembling a honeycomb pattern. Additionally, the lower bumper has been slightly adjusted in design, and the fog lights on both sides have been removed, making the front face of the vehicle more compact.
Was this review help?
13
1
Share
More Forum Discussions

Should You Shift to Neutral When Waiting at a Red Light?

Whether to shift to neutral when waiting at a red light depends on the duration of the wait. For long red lights, it is recommended to shift into neutral; for short waits, shifting into neutral is unnecessary. Avoid shifting into park (P) when waiting at a red light, as a rear-end collision in this situation could potentially damage the transmission. Many modern car models are equipped with auto start-stop and auto hold functions, which work together seamlessly. When waiting at a red light, the engine automatically shuts off, and the car engages the parking brake. Upon pressing the accelerator lightly when the light turns green, the engine restarts while the parking brake automatically releases, allowing the car to move smoothly.
19
0
Share

What engine is used in the Dongfeng Fengshen S30?

Dongfeng Fengshen S30 is equipped with a 1.6L engine produced by French PSA Group. This engine is a small, efficient, and low-energy consumption engine developed by Peugeot Citroën. Its characteristic is that it performs better at high RPMs while being relatively fuel-efficient. The Dongfeng Fengshen S30 has dimensions of 4526mm in length, 1740mm in width, and 1465mm in height, with a wheelbase of 2610mm. It is a 4-door, 5-seater sedan with a 5-speed manual transmission, a top speed of 188 km/h, front-engine front-wheel-drive layout, and electric power steering.
3
2
Share

How to Adjust Speed in an Automatic Transmission Car?

Automatic transmission adjusts speed based on the depth of the accelerator pedal. Simply control the accelerator to manage speed. For smooth driving, gently lift the accelerator pedal at the appropriate time, and the transmission will automatically shift up, keeping the engine at a lower RPM at the same speed. Then, lightly press the accelerator to continue accelerating—the transmission won’t immediately downshift, as it’s designed with an early upshift and delayed downshift function to prevent frequent gear changes. Pressing the accelerator gradually increases speed; releasing it and pressing the brake pedal enables emergency deceleration; gradually easing off the accelerator allows for gradual deceleration.
17
1
Share

What does EPC on the dashboard mean?

EPC on the dashboard stands for Electronic Power Control, and the illuminated indicator indicates issues with the engine or electronic systems. Reasons for the EPC light to come on: 1. The electronic throttle is dirty or has excessive carbon buildup; 2. The fuel used does not meet the required standards; 3. Malfunction in the vehicle's computer system; 4. Insufficient battery power; 5. Occasional issues or false alarms by the vehicle. The working principle of EPC is that the car's engine detects faults through the control unit monitoring the electronic throttle system, sending commands to ABS and ASR to enhance vehicle handling while preventing loss of control caused by reaching dynamic limits.
17
1
Share

Where is the OBD interface located in the Focus?

The OBD interface in the Focus is located inside the storage compartment below the light control buttons. Simply pull open the storage compartment and remove it to access the interface. The OBD interface in a car is essentially a power socket-like port that allows technicians to connect a computer to retrieve vehicle information and status. The Focus has body dimensions of 4534mm in length, 1823mm in width, and 1483mm in height, with a wheelbase of 2648mm. The 2020 model of the new-generation Focus is equipped with two engine options: a 1.5L EcoBoost and a 1.5L Ti-VCT, with all models meeting the China VI emission standards.
17
4
Share

Can the heavy steering wheel of a sedan be adjusted?

The heavy steering wheel of a sedan can be adjusted. The reasons for a heavy steering wheel are: 1. Insufficient power steering fluid: Power steering fluid is an essential medium in the car's power steering pump. When the power steering fluid is not replaced after prolonged use, the steering may become heavier. It is necessary to check for any leakage or loss of power steering fluid. 2. Low tire pressure: While driving, if the tire pressure is too low, the friction coefficient increases, making steering more difficult and resulting in a heavy steering wheel. 3. Toe-in: The toe-in of a car has a significant impact on steering. If there is an issue with the car's toe-in, the steering wheel may also become heavier. It is advisable to visit a professional repair shop to address this issue to prevent other faults caused by improper toe-in.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.