What is the lifespan of Michelin tires in kilometers?

How to Control the Steering Wheel of a Car?

Control the steering wheel of a car as follows: 1. After getting in the car, align your body with the steering wheel and keep it straight. Lean your back lightly against the backrest of the seat. Adjust the seat forward or backward to a suitable position according to your height. Fasten the seat belt if the vehicle is equipped with one. 2. Look straight ahead, lightly hold the upper left side of the steering wheel with your left hand and the lower right side with your right hand, with both elbows relaxed and naturally hanging down. The thumbs of both hands should naturally extend and rest on the upper edge of the steering wheel, while the other four fingers should lightly grip from the outside inward. 3. Place your left foot below the clutch pedal and your right foot lightly on the accelerator pedal at about two-thirds of its length. 4. Maintain a relaxed and comfortable driving state and a good driving posture.

17

3

Share

What is the speed limit when crossing a narrow bridge with good road conditions?

When crossing a narrow bridge with good road conditions, the speed should be controlled not to exceed 30 kilometers per hour. The following are the relevant regulations: 1. Roads without a center line: urban roads have a speed limit of 30 kilometers per hour, while highways have a speed limit of 40 kilometers per hour. 2. Roads with only one motor vehicle lane in the same direction: urban roads have a speed limit of 50 kilometers per hour, while highways have a speed limit of 70 kilometers per hour. When entering or exiting non-motorized lanes, crossing railway crossings, sharp curves, narrow roads, or narrow bridges, making U-turns, turning, or descending steep slopes, encountering fog, rain, snow, sandstorms, or hail with visibility within 50 meters, driving on icy, snowy, or muddy roads, or towing a malfunctioning motor vehicle, the maximum speed should not exceed 30 kilometers per hour. Among these, tractors, battery-powered vehicles, and wheeled special machinery should not exceed 15 kilometers per hour.

13

3

Share

What does the ECOMODE button mean?

Eco-mode refers to the economic driving mode of a car. 'Eco' is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). Eco mode is further divided into active eco driving mode and non-active eco driving mode. When the eco indicator light on the dashboard illuminates, it indicates that the vehicle's economic mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically adjusts settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active eco mode does not have a dedicated button. When the eco indicator light on the dashboard illuminates, it serves merely as a reminder function. The eco mode automatically evaluates your driving behavior; if your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the eco indicator light. Most cars employ the active eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can activate the eco mode. However, it is unnecessary to enable eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of eco mode but also affect the vehicle's power performance. Additionally, eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, eco mode may also become ineffective. When high torque output is required, such as when climbing hills, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the eco mode will not operate under these conditions either.

17

4

Share

On Which Dates Is the Subject One Test Held Each Month?

Subject One tests are not necessarily held every day, but under normal circumstances, they are scheduled from Monday to Friday or on workdays, excluding holidays. After completing the required study hours on the 12123 platform, you can book an appointment for the Subject One test. The first test session usually starts at 8:00 AM daily, followed by the second session at 10:00 AM. The afternoon session begins at 2:00 PM, with all tests concluding by 6:00 PM. It is recommended that candidates arrive at the test center at least half an hour before the scheduled time. Below is an introduction to Subject One: 1. Total Test Duration and Question Types: The Subject One test lasts 45 minutes and consists of 100 questions, including true/false questions and multiple-choice questions. The test papers are randomly selected and compiled by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations." 2. Test Content: Subject One is a test on road traffic safety laws, regulations, and related knowledge. The test content includes road traffic rules, traffic signals, handling of traffic safety violations and accidents, regulations on applying for and using motor vehicle driver's licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules.

17

3

Share

What are the vehicle inspection time regulations?

Here are the time regulations for vehicle annual inspections: 1. Non-commercial passenger cars: Non-commercial passenger cars, small and micro non-commercial passenger vehicles, and some 7-9 seat non-commercial small and micro passenger vehicles (excluding minivans) are included in the exemption scope, exempt from on-site inspections for 6 years, only requiring an inspection mark application every two years. 2. Vehicles aged 6-10 years: Starting from November 20, 2020, for vehicles older than 6 years but less than 10 years, the inspection cycle has been relaxed from once a year to once every two years, meaning private cars only need to undergo on-site inspections twice within 10 years, specifically in the 6th and 8th years.

13

1

Share

What is the cleaning method for car sunroof sunshades?

Common methods involve directly removing the sunroof sunshade for cleaning. You can use either foam-type car cleaners or non-foam car cleaners. Here are detailed introductions about car sunroofs: 1. Overview: Car sunroofs are installed on the roof and can effectively circulate air inside the vehicle, increase fresh air intake, filter in-car air, and protect the health of drivers and passengers. Meanwhile, car sunroofs can also broaden the view and meet the shooting needs of mobile photography. 2. Classification: Car sunroofs can be roughly divided into: sliding-out type, built-in type, built-in flip-out type, panoramic type, and curtain type. They are mainly installed on commercial SUVs, sedans and other models.

6

3

Share

What is the lifespan of Michelin tires in kilometers?

How to Control the Steering Wheel of a Car?

What is the speed limit when crossing a narrow bridge with good road conditions?

What does the ECOMODE button mean?

On Which Dates Is the Subject One Test Held Each Month?

What are the vehicle inspection time regulations?

What is the cleaning method for car sunroof sunshades?

What Are the Benefits of a Slipper Clutch?

How to Determine Vehicle Speeding

Which is Better: Built-in or External Tire Pressure Monitoring?

What Causes the Interior Dome Light Not to Work?