What is the lifespan of an Aisin 6AT transmission?

1 Answers
PaisleeMarie
07/29/25 6:15pm
The lifespan of an Aisin 6AT transmission is approximately 200,000 kilometers, but this is under the condition that the vehicle is driven properly. For most Aisin 6AT transmissions, the transmission fluid should be replaced after the car has been used for 3 years or driven about 60,000 kilometers. If the car frequently operates in congested environments, the transmission fluid can be replaced at 50,000 kilometers. If the car is often driven on highways, the transmission fluid can be replaced at 80,000 kilometers. Methods for replacing transmission fluid: Flush method: The flush method is performed while the car is running, using specialized equipment to replace the fluid without lifting the car. This method maintains fluid circulation within the transmission, flushing out sludge and impurities deposited at the bottom of the transmission, resulting in a cleaner internal transmission. In most cases, the flush method can replace about 10 liters of fluid. Gravity drain method: The gravity drain method is performed when the car is turned off. In this method, the car is lifted, and the transmission fluid naturally flows out under gravity. This is the most common fluid replacement method, though it is less effective than the flush method. Sludge inside the transmission cannot be completely removed, and only 4-6 liters of fluid can be replaced.
Was this review help?
4
4
Share
More Forum Discussions

What are the effects of not changing transmission fluid for a long time?

If the transmission fluid is not changed for a long time, it will accelerate the wear of the transmission and may even cause damage to the transmission's shift control mechanism. For manual transmissions, prolonged failure to change the transmission fluid can lead to difficulty in shifting. Automatic transmissions have shift control mechanisms that require transmission fluid to function properly. When changing the transmission fluid, it is essential to go to a professional service center and use specialized equipment. There are two methods for changing transmission fluid: the gravity drain method and the machine flush method. If the transmission fluid is not changed for an extended period, it will become increasingly viscous, impairing heat dissipation and causing excessive temperatures. Over time, this will affect the transmission's lifespan.
4
3
Share

What are the symptoms of insufficient transmission fluid?

The symptoms of insufficient transmission fluid are: 1. Gear shifting feels jerky and not smooth. 2. When pressing the accelerator, the increase in engine RPM does not correspond to the increase in vehicle speed, meaning the RPM rises normally but the speed does not increase, giving the feeling of not being in gear, and starting the vehicle will also be particularly difficult; 3. In severe cases, it can cause the transmission to overheat and damage the transmission. If the transmission fluid is not replaced for a long time, the fluid will become increasingly viscous, affecting heat dissipation and leading to excessively high temperatures. Over time, this will impact the lifespan of the transmission. It is essential to use specialized, original manufacturer transmission fluid and not mix different types. Adding too much fluid can increase resistance during use and wear out components; too little fluid can result in sluggish gear shifting.
12
1
Share

What is the difference between China V and China IV?

The biggest difference between China V and China IV lies in stricter emission standards for heavy-duty vehicles. Additionally, China V has raised the standards for nitrogen oxides (NOX), the total sum of hydrocarbons and nitrogen oxides, and particulate matter concentration (PM). Furthermore, China V has introduced standards for particulate matter particle count (PN) and non-methane hydrocarbons (NMHC). Below is relevant information: China V, fully known as the National Fifth Stage Motor Vehicle Pollutant Emission Standard, and China IV, fully known as the National Fourth Stage Motor Vehicle Pollutant Emission Standard, both regulate the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulates, and soot emitted from vehicle exhaust.
9
3
Share

How often should the spark plugs of the Touran be replaced?

The spark plugs of the Volkswagen Touran should be replaced every 60,000 to 70,000 kilometers. Under normal maintenance conditions, car spark plugs are typically replaced after 40,000 to 60,000 kilometers of driving. However, this may vary depending on the brand and engine type, so it is recommended to follow the instructions in the owner's manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage ignition wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage ignition wires in the correct firing order and secure the cover plate.
5
3
Share

Is the Buick Excelle equipped with a three-cylinder engine?

The Buick Excelle is equipped with a three-cylinder engine, as both of its available engines are three-cylinder units. The Excelle offers two engine options: 1. A 1.0-liter turbocharged engine. The 1.0-liter turbocharged engine delivers a maximum power of 92 kW and a peak torque of 170 Nm. 2. A 1.3-liter turbocharged engine. The 1.3-liter turbocharged engine produces a maximum power of 120 kW and a peak torque of 230 Nm. Additional information: The Excelle is a premium mid-size sedan introduced by SAIC-GM. In terms of body dimensions, it measures 4609 mm in length, 1798 mm in width, and 1486 mm in height, with a wheelbase of 2640 mm.
12
0
Share

What is the transmission model of the Kodiaq?

The transmission model of the Kodiaq is DQ380, which is a 7-speed dual-clutch DSG transmission. Below is more information about the Kodiaq's engines: 1. The Kodiaq is equipped with two engines, one is a low-power version 2.0-liter turbocharged engine, and the other is a high-power version 2.0-liter turbocharged engine. 2. The low-power version 2.0-liter turbocharged engine has a maximum power of 137kW, a maximum torque of 320Nm, a maximum power speed range of 4100 to 6000 rpm, and a maximum torque speed range of 1500 to 4000 rpm. This engine features hybrid injection technology and uses an aluminum cylinder head and cast iron cylinder block. 3. The high-power version 2.0-liter turbocharged engine has a maximum power of 162kW, a maximum torque of 350Nm, a maximum power speed range of 4500 to 6200 rpm, and a maximum torque speed range of 1500 to 4400 rpm. This engine features direct fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.