What is the lifespan of a Subaru horizontally opposed engine?

2 Answers
StLena
07/29/25 12:59pm
If used correctly and properly maintained, a Subaru horizontally opposed engine can last over 300,000 kilometers without issues. Horizontally opposed engines have higher requirements for engine oil. If your vehicle is equipped with this type of engine, it's essential to change the oil regularly and use high-quality oil. Here is some relevant information about engine oil: 1. Introduction: Engine oil is referred to as the lifeblood of the engine. Without oil, the engine cannot operate properly. 2. Functions: Engine oil not only lubricates but also cleans, seals, cushions, prevents rust, and dissipates heat within the engine. During operation, the oil forms a protective film on the surfaces of engine components, preventing direct contact and friction between parts.
Was this review help?
10
4
Share
DiSawyer
08/14/25 2:07am
I drove a Subaru Forester for twelve years, and the engine was still running smoothly, with the odometer surpassing 250,000 kilometers. The horizontally opposed engine design reduces vibration and lowers the center of gravity, which might suggest a longer lifespan compared to conventional engines. But the key was my strict adherence to changing the oil and filter every six months and avoiding prolonged high-speed driving. From online discussions, most owners agree that with proper maintenance, hitting 200,000 kilometers is no problem. However, neglecting oil passage cleaning can lead to lubrication issues, causing the engine to retire early. Regular maintenance really saves money and hassle, and replacing parts isn’t expensive either.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

What is the fuel consumption of the RS7?

RS7 owner average fuel consumption: average fuel consumption of 17.8 liters per 100 kilometers, official fuel consumption: 10.3 liters. Here is additional information: Engine: The Audi RS7 is a mid-to-large-sized imported luxury car, originally equipped with a 4.0T V8 turbocharged engine, providing ample power. Design style: The Audi RS7 concept car was designed by a designer from Austria, and the car's exterior design incorporates the styles of several Audi models. The side body and rear design are very similar to the Audi R8, while the car doors adopt Lamborghini's classic scissor door design.
4
1
Share

How to Tighten Motorcycle Mirrors?

First, take a wrench and loosen the screws on the mirror to make them slack. Hold the mirror with your hand and rotate it counterclockwise until the mirror comes off. Place the removed mirror on the ground to inspect the extent of damage. Adjust the mirror angle and use the wrench to tighten the screws on the mirror.
8
2
Share

How to Reset the Maintenance Reminder for the 2020 Magotan?

First, turn the ignition key of the Volkswagen Magotan to the ON position to illuminate the car's dashboard. Then, press the down button on the steering wheel to locate and select the maintenance option. After entering the maintenance interface, a selection screen will appear; choose the reset option. Finally, the vehicle's maintenance reminder will be canceled.
14
1
Share

What is the correct method for B2 pressing the pancakes?

Use the raised left ridge inside the car hood to align with the direction of the front 1st and 2nd pancakes. When the car is about to pass the 4th pancake, center the steering wheel. Once the car is about to pass the 5th pancake, straighten the steering wheel.
8
1
Share

How to Adjust the Angle of the Wiper Linkage Rod?

First, turn the key to the ON position, activate the wipers, then turn off the switch and the key. At the base of the wiper arm, remove the dust cover, use an appropriate wrench or socket to loosen the screw until it can be rotated. Then lift the wiper blade and gently shake it. Once it becomes loose, position the wiper blade to the desired angle, tighten the screw, and replace the dust cover.
15
2
Share

Difference Between TPR Wheels and Rubber Wheels?

TPR tires are tire products that do not require high wear resistance or strength, whereas rubber tires used in vehicles demand high load-bearing capacity, wear resistance, and mechanical strength. Here is additional information: TPR tires: Primarily used for casters, cart wheels, and toy tires where load-bearing capacity and wear resistance strength requirements are not very high. They are typically made of pure TPR material or a composite of TPR with other materials like PP or ABS through injection molding. Rubber tires: Usually vulcanized rubber tires, used for various vehicle tires. Due to the high demands on load-bearing capacity, wear resistance, and mechanical strength, the material requirements for these tires are stringent. Besides vulcanization, materials like steel wires and nylon fabric are incorporated into rubber tire products to enhance impact resistance and anti-burst performance.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.