What is the lifespan of a 7-speed dry dual-clutch transmission?

Does Car Heater Consume Fuel or Electricity?

Car heater does not consume fuel or electricity. Below is the relevant introduction about car heater: 1. Reason: The car heater blows out the heat from the heater core through the blower, which is the heat generated during engine operation. Turning on the blower helps dissipate engine heat and reduces the operating frequency of the electric fan, so it neither consumes fuel nor electricity. 2. Note: Replace the cabin air filter in time. If the filter is not replaced promptly, it will produce odors inside the car. This not only affects you but also other passengers in the car. Therefore, to prevent odors and create a fresh and comfortable environment, the filter must be replaced promptly.

15

1

Share

What sounds are produced in the early stages of a broken axle?

When a vehicle emits metallic friction sounds or metallic collision sounds, these are characteristic signs of early-stage axle damage. Below is relevant information about a broken axle: 1. Symptoms: (1) Feeling intense body sway while driving. (2) Hearing abnormal noises, specifically metallic friction sounds, when turning the steering wheel. (3) Experiencing strong vibrations during high-speed driving. 2. Consequences: (1) A damaged axle can cause the car to lose balance, resulting in vibrations, bumps, steering wheel shaking, and deviation while driving. (2) Over time, it can lead to uneven tire wear, causing cracks and accelerated wear on the tires. (3) If the axle is severely damaged, the tire may even detach while driving, leading to unimaginable traffic accidents.

1

2

Share

What is the difference between 1.4 and 2.0 displacement?

The difference between 1.4 and 2.0 lies in their displacement, as well as the power output and fuel consumption they exhibit. Below is an introduction to displacement-related information: 1. Displacement: Displacement is the total working volume of all cylinders in an engine, calculated by multiplying the volume swept by the piston from top dead center to bottom dead center by the number of cylinders. Displacement is a crucial structural parameter that comprehensively measures the size of an engine. The performance indicators of an engine are closely related to its displacement. Generally, the larger the displacement of a car, the higher its power output. Unit displacement is commonly used as a basis for evaluating the size of different engines. 2. According to the standards in Mainland China, cars are classified as follows: micro cars (displacement below 1L), compact cars (displacement between 1.0~1.6L), mid-size to full-size cars (displacement between 2.5~4.0L), and luxury cars (displacement above 4L).

13

5

Share

Comparison between BYD Tang and Equinox?

Comparison between BYD Tang and Equinox includes: 1. Power: The BYD Tang is equipped with a 2.0TI engine independently developed by BYD, with the model number BYD487ZQA; the Equinox is equipped with a 1.5T turbocharged gasoline engine. 2. Configuration: The BYD Tang features an ADAS intelligent assistance system and vehicle stability control system; the Equinox comes with a panoramic sunroof and an electric tailgate that can be opened in two ways. 3. Interior differences: The BYD Tang's center console is equipped with a 12.8-inch oversized floating LCD screen that supports voice control. This screen can also rotate 90 degrees, and the center console area eliminates physical button designs, integrating all functions into the screen; the Equinox is equipped with an 8-inch LCD display, with the central air vents featuring more chrome decorations, and the panel design in front of the passenger seat is more three-dimensional.

15

2

Share

What details should you pay attention to when picking up a new car?

Details to pay attention to when picking up a new car: 1. Check the odometer: Generally, a new car's odometer reading between 0-30km is normal, as new vehicles undergo testing after production and may be moved during transportation by dealers. 2. Check the nameplate: The door frame of the car has a nameplate with production date, engine number, etc., which serves as the car's ID. 3. Inspect the exterior: If you can choose among several cars of the same color and model, pay attention to body gaps and paintwork. One technique is to focus on the gaps between the bumper and body, door gaps, and front/rear bumper gaps. Open the doors to check for any color difference between the interior and exterior paint. 4. Examine the engine: The engine is crucial. A well-functioning engine should have no oil leaks, respond quickly and sensitively when started, run smoothly without shaking, and produce even sounds without sharp or irregular noises. Place your hand on the engine cover—there should be no noticeable vibration. Inside the car, you should barely hear the engine noise. Such an engine is normal and qualified. 5. Check tires and doors: Normal new tires should have no damage on the sidewalls, especially the front tires. The tread should have no puncture marks, and the tire hairs should ideally be intact, at least visible. For doors, check the opening force and resistance, as well as the condition of the windows to ensure they are not loose or leave gaps when closed. 6. Inspect interior and exterior lights: Turn on all lights, including hazard lights. Check interior lighting inside the car, then step out to verify if headlights, turn signals, and brake lights are functioning properly. Faulty lights can severely impact driving safety at night.

18

3

Share

When to Drive a New Car at High Speed?

It is recommended after driving 5,000 kilometers. During the break-in period of a new car, high-speed driving above 90 km/h should be avoided. When the new car has been driven for about 5,000 kilometers and is about to complete the break-in period, the owner can briefly run the engine above 4,000 RPM to reduce carbon deposits and improve engine performance. Here are some precautions: 1. Avoid full-load driving: New cars during the break-in period should avoid full-load driving, as excessive load increases the burden on the engine and transmission, leading to excessive power output and over-wearing of components. Therefore, owners should understand the maximum load capacity of their cars and avoid full-load driving during the break-in period to extend the vehicle's lifespan. 2. Avoid prolonged use of low gears: Owners should avoid prolonged use of low gears and intentionally allow each gear to undergo the break-in process. For automatic transmission models, although the manual gear shifting process is eliminated, owners should accelerate continuously under good road conditions to allow the transmission to shift up smoothly and avoid insufficient break-in of higher gears.

5

3

Share

What is the lifespan of a 7-speed dry dual-clutch transmission?

Does Car Heater Consume Fuel or Electricity?

What sounds are produced in the early stages of a broken axle?

What is the difference between 1.4 and 2.0 displacement?

Comparison between BYD Tang and Equinox?

What details should you pay attention to when picking up a new car?

When to Drive a New Car at High Speed?

When will China National III vehicles be phased out?

Can You Make a U-Turn on a Single Yellow Line?

Is the Vehicle Transfer Agreement Useful?

What engine is used in the Dorcen G70S?