What is the License Plate Prefix for Meizhou?

Where is the air conditioning filter of the new Peugeot 308 located?

The air conditioning filter of the new Peugeot 308 is located in the engine compartment, above the right front wheel. Be cautious of the working area's temperature to avoid burns from high heat. Steps to replace the air conditioning filter: 1. First, remove the soundproofing cotton. You can use a flat-head screwdriver to pry open the clips and take out the soundproofing cotton; 2. Open the cover of the air conditioning filter, pull out the old filter, and install the new one; 3. Replace the cover and restore the soundproofing cotton. The clips can be snapped back into place by hand. The new Peugeot 308 is a compact sedan under the Peugeot brand. This model is equipped with three types of engines: a low-power version 1.2-liter turbocharged engine, a high-power version 1.2-liter turbocharged engine, and a 1.6-liter naturally aspirated engine. Its front suspension uses a MacPherson independent suspension, and the rear suspension employs a torsion beam non-independent suspension.

3

1

Share

What are the body dimensions of the 2019 Camry?

2019 Camry has a length, width, and height of 4885mm, 1840mm, and 1455mm respectively, with a wheelbase of 2825mm. Below is some extended information about the 2019 Camry: 1. The 2019 Camry is the eighth-generation model of the Camry, launched in October 2018, and is one of the 'Japanese Big Three,' alongside the Accord and the Teana. 2. In terms of appearance, the 2019 Camry has a high level of recognition, featuring dual design styles: Luxury and Sport, both derived from the latest family 'Keen-Look' design language. The Luxury version's front grille adopts an oversized trapezoidal horizontal bar grille, almost covering the entire front face, with smoother body lines, a lower waistline, and increased rear cabin height. The Sport version features a three-layer grille front face, introduces a dual-tone body design for the first time, and adopts a dual-side quad-exhaust system, significantly enhancing its sporty appeal.

3

4

Share

What is the actual fuel consumption of the Baojun 310 1.2L model?

The actual fuel consumption of the Baojun 310 1.2L model is 5.3-5.4L/100km. The fuel consumption of a car is influenced by many factors. In addition to the various factors of the vehicle itself, the driver's driving habits and external weather, road conditions, and other factors also have a crucial impact on fuel consumption. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer. Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance will require higher fan speeds and lower temperatures to achieve a cooling effect. 2. Frequent hard braking. Frequent hard braking is the main reason for high car fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid turning on the air conditioning too aggressively in small-displacement vehicles. For vehicles exposed to the sun, do not turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher setting without turning on the air conditioning to expel the hot air inside. After the vehicle has cooled down moderately, then turn on the air conditioning.

1

0

Share

Can a car that uses 95-octane gasoline be filled with 92-octane?

95-octane cars must not use 92-octane gasoline for a long time, and the reasons are as follows: 1. The biggest difference between 92-octane and 95-octane gasoline is the different octane value in the gasoline, and the higher the octane value, the stronger the anti-knock property of the gasoline. 2. Generally, a car engine has a specified compression ratio, and the corresponding gasoline model can be selected through the compression ratio. A compression ratio of 8-10 uses 92-octane gasoline, and a ratio above 10 uses 95-octane gasoline. 3. If a high-compression engine uses 92-octane gasoline, premature combustion (knocking) at the wrong time will cause engine knocking. This can lead to unstable idling, reduced power, increased fuel consumption, and in severe cases, may even cause engine valve bending or damage to the throttle body cover. Therefore, 95-octane cars must not use 92-octane gasoline for a long time, unless the vehicle runs out of fuel halfway.

10

0

Share

How many seats does the Rolls-Royce Cullinan have?

The Rolls-Royce Cullinan is available in both four-seat and five-seat versions. It is Rolls-Royce's first luxury SUV model. This vehicle is equipped with a 6.7-liter twin-turbocharged V12 engine across all variants. The Rolls-Royce Cullinan has a wheelbase of 3295 mm, with length, width, and height measuring 5341 mm, 2000 mm, and 1837 mm respectively. Below are the relevant details about the Rolls-Royce Cullinan: 1. Engine Specifications: The Rolls-Royce Cullinan's 6.7-liter twin-turbocharged V12 engine, codenamed N74B68A, delivers a maximum power output of 420 kW and a peak torque of 850 Nm. This engine reaches its maximum torque at 1600 rpm and achieves its maximum power at 5000 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. 2. Design Features: The Rolls-Royce Cullinan employs double-wishbone independent suspension systems for both front and rear axles. This suspension setup enhances the vehicle's ride comfort and driving dynamics.

12

1

Share

What aspects should be paid attention to when buying a car?

When buying a car, the following issues should be noted: 1. The vehicle identification number, engine number, chassis number, whether it is manual or automatic transmission, and the documents for delivery should not be missing. At the same time, clarify the price, the ex-factory price and other costs, to prevent dealers from playing tricks. 2. Pay attention to the details marked on the contract. Many contracts now state at the end that all interpretation rights belong to the dealer, which is very unfair to consumer rights, but there is no other way, as dealers will not sell the car without signing the contract. Therefore, in the car purchase contract, issues such as car maintenance charges, delivery method, location, time, and whether the responsibilities of both parties are equal in terms of breach of contract must be clarified. 3. The car purchase contract, invoice, and other documents must have consistent seals. If purchasing an imported car, there may be inconsistent seals, indicating that the imported car purchased by the consumer was bought from abroad by multiple dealers contributing parts of the money. This not only results in a higher price but is also very unfavorable to consumer rights. 4. When everything is arranged and ready for pickup, carefully check the condition of the car body. The condition of the car sold by the dealer to the consumer must be clearly understood.

1

4

Share

What is the License Plate Prefix for Meizhou?

Where is the air conditioning filter of the new Peugeot 308 located?

What are the body dimensions of the 2019 Camry?

What is the actual fuel consumption of the Baojun 310 1.2L model?

Can a car that uses 95-octane gasoline be filled with 92-octane?

How many seats does the Rolls-Royce Cullinan have?

What aspects should be paid attention to when buying a car?

Why does the Haval F7 seat belt keep beeping?

Why Shouldn't You Mess with the Blue Badge Volvo?

What does anti-lag system mean in cars?

What is the method to reset the maintenance light on a Mercedes-Benz E260?