What is the license plate policy for new energy vehicles?

1 Answers
AlinaDella
07/29/25 6:01pm
New energy vehicle license plate policies are as follows: 1. License plate policy: New energy vehicles are not subject to license plate restrictions or purchase limitations. Applying for a new energy vehicle license plate does not require prior application; you can directly proceed to the transportation department to obtain the plate after purchasing the vehicle. Purchasing new energy vehicles qualifies for government financial subsidies, and the city promotes the construction of public charging stations. 2. New energy vehicles: New energy vehicles refer to those using low-pollution power fuels as their power source, mainly including four types: hybrid electric vehicles, pure electric vehicles, and fuel cell electric vehicles.
Was this review help?
2
1
Share
More Forum Discussions

What to Do If a Front Tire Blows Out?

Methods to handle a front tire blowout: 1. Hold the steering wheel firmly with both hands to control the direction; 2. Allow the vehicle to slow down naturally, shift to neutral or downshift gradually; 3. Release the accelerator pedal and gently apply the brakes repeatedly to bring the car to a slow stop; 4. After stopping, set up a warning triangle behind the vehicle to prevent secondary accidents. Methods to prevent tire blowouts: 1. Pay attention to tire maintenance and replace vehicle tires regularly according to the vehicle manual and the advice of 4S shop maintenance personnel; 2. Walk around the car before each drive to check the tire pressure and whether there are stones or other foreign objects on the tires, keeping the tire surface clean; 3. Regularly check the tire wear level. If the tread grooves on the tire surface are very close to the lowest plane of the tire, the tire should be replaced.
12
3
Share

Should You Shift to N Gear When Waiting at a Red Light in an Automatic Transmission Car?

When waiting at a red light in an automatic transmission car, you should shift to N gear. The starting procedure for an automatic transmission car is: 1. Sit in the driver's seat and press the start button, the ACC light will turn on; 2. Press the start button again for the vehicle to perform a self-check; 3. Step on the brake and press the start button to ignite and start the engine; 4. Step on the foot brake, shift to D gear, and release the handbrake. An automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The gears are as follows: 1. P gear is the parking gear and starting gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear, also known as the forward gear; 5. L gear is the low-speed gear; 6. S gear is the sport mode.
4
1
Share

What Happens When the Intake Manifold Leaks?

Intake manifold leakage can lead to the following symptoms: Abnormal Pressure Detection: The pressure inside the intake manifold will change because it does not match the normal intake channel, resulting in abnormal pressure detection. Lean Air-Fuel Mixture: The intake air volume increases too much, and since the fuel injection amount is primarily determined by the intake volume. Higher Idle Speed: With more air, the fuel injection amount will increase accordingly, causing the idle speed to rise. Alternatively, due to irregular intake from the leakage point, the idle speed may fluctuate between high and low. Fluctuating Fuel Injection: Another scenario is when the ECU detects the idle state through the throttle sensor, leading to fluctuating fuel injection. If the leakage is not severe, it may only result in a slightly higher idle speed without causing erratic engine speed.
5
2
Share

How to Turn Off the Engine Auto Start-Stop Function?

Methods to turn off the engine auto start-stop function: 1. Press the vehicle's one-touch start-stop button to start the engine; otherwise, the auto start-stop function cannot be turned off. 2. Locate the auto start-stop button on the vehicle's central control panel. 3. Press the button to deactivate the vehicle's auto start-stop function. The car engine is the device that provides power to the vehicle, serving as the heart of the car and an energy conversion device. Its function is to convert the thermal energy of gasoline (or diesel) into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the piston to perform work. Based on the working method of the intake system, engines can be categorized into four types: naturally aspirated engines, turbocharged engines, supercharged engines, and twin-charged engines.
19
0
Share

Why Can't the Car Key Control Start the Vehicle?

The reasons why the car key control cannot start the vehicle are: 1. The car key battery is dead; 2. The car's battery is dead, and the key cannot be sensed; 3. There is a problem with the key fob or the sensor module. Precautions for using the car key are: 1. Avoid placing it with electronic devices, as the smart key uses low-intensity radio waves and may not function properly under magnetic interference; 2. Do not throw or drop it carelessly; 3. If the smart key gets wet, open the casing, lay it flat, dry it with a hairdryer, and then take it to a repair shop for inspection; 4. Do not expose the smart key to direct high temperatures; 5. Do not leave the spare key inside the car; 6. Do not use the wrong battery—always use the original battery; 7. Avoid contact with metal objects, as the smart key may malfunction when in contact with metal.
5
0
Share

What Type of Driver's License is Required to Drive an Iveco?

Different models of Iveco require different levels of driver's licenses. The types of driver's licenses and the corresponding vehicle categories are introduced as follows: Introduction to Driver's License Types: There are 13 types of driver's licenses, namely A1, A2, A3, B1, B2, C1, C2, D, E, F, M, N, and P licenses. Introduction to Vehicle Categories: The A1 license permits driving large passenger vehicles; the allowed vehicles include large passenger vehicles, A3, B1, B2, C1, C2, C3, C4, and M. The A2 license permits driving tractor vehicles; the allowed vehicles include heavy and medium-sized full trailers, semi-trailer combinations, B1, B2, C1, C2, C3, C4, and M.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.