What is the license plate code of Zhongshan City?

1 Answers
LauraRose
07/28/25 5:03pm
The license plate code of Zhongshan City is Yue T. License plate codes for various regions in Guangdong: Yue A Guangzhou, Yue B Shenzhen, Yue C Zhuhai, Yue D Shantou, Yue E Foshan, Yue F Shaoguan, Yue G Zhanjiang, Yue H Zhaoqing, Yue J Jiangmen, Yue K Maoming, Yue L Huizhou, Yue M Meizhou, Yue N Shanwei, Yue P Heyuan, Yue Q Yangjiang, Yue R Qingyuan, Yue S Dongguan, Yue T Zhongshan, Yue U Chaozhou, Yue V Jieyang, Yue W Yunfu, Yue X Shunde District, Yue Y Nanhai District, Yue Z Hong Kong and Macao vehicles entering mainland China. Zhongshan City is a prefecture-level city in Guangdong Province and one of the cities in the urban agglomeration on the west bank of the Pearl River Estuary. Zhongshan City is located in the lower reaches of the Xi and Bei Rivers in the central-southern part of the Pearl River Delta, bordering Panyu District of Guangzhou City and Shunde District of Foshan City to the north, Jiangmen City, Xinhui District and Doumen District of Zhuhai City to the west, Zhuhai City to the southeast, and facing Shenzhen and Hong Kong Special Administrative Region across the Lingdingyang of the Pearl River Estuary to the east.
Was this review help?
3
0
Share
More Forum Discussions

How Often Should the Car Oil Filter Be Replaced?

The replacement of a car oil filter is not based on time but on the mileage driven, and it should be replaced approximately every 5,000 kilometers. However, even if the mileage hasn't reached 5,000 kilometers, the oil filter is usually replaced whenever the engine oil is changed. Relevant details are as follows: 1. Since engine oil must pass through the oil filter to reach the lubrication points, the function of the oil filter is to filter out impurities from the oil entering the engine system. This prevents the continuous mixing of impurities during the oil circulation process, which could lead to oil passage blockages or even severe consequences such as engine damage. 2. Gasoline is refined from crude oil through complex processes and then transported through specialized channels to various gas stations, eventually reaching the vehicle's fuel tank. During this process, impurities in the gasoline inevitably enter the fuel tank. Additionally, as usage time increases, the amount of impurities also rises. As a result, the fuel filter used to filter these impurities becomes dirty, significantly reducing its filtering effectiveness over time.
17
5
Share

Why Do Car Tires Burst?

The reasons for tire bursts are as follows: 1. Low tire pressure: Some drivers, fearing a 'tire burst,' often fail to inflate the tires to the standard pressure, which is a serious mistake. Low tire pressure increases the wheel's sinking amount and radial deformation, raises friction between the tire surface and the ground, increases rolling resistance, and elevates the internal stress of the tire body. This leads to a sharp rise in tire body temperature, softening of the tread rubber, accelerated aging, and causes local delamination of the tire body and increased tread wear. 2. Over-inflation of tires: To enhance the vehicle's load capacity, some drivers prefer to exceed the standard tire pressure during inflation, unknowingly accelerating tire wear and increasing the likelihood of a tire burst. Excessive tire pressure increases the tension of the tire body cords, speeding up the fatigue process of the cords. Especially when over-inflated and driving overloaded or at high speeds, it further increases the internal stress of the cords, rapidly raises tire temperature, accelerates rubber aging, and reduces fatigue strength. This results in severe wear in the center of the tread, sawtooth-like wear on the sidewall patterns, and cord breakage, leading to tire bursts.
8
0
Share

What type of suspension does the Volkswagen T-Roc have?

The 1.2T T-Roc model adopts a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. The 1.4T model features a front MacPherson strut independent suspension and a rear multi-link independent suspension. The drive system is front-wheel drive. Below is more information about automotive suspension systems: 1. The suspension system refers to all the force-transmitting connection devices between the vehicle's frame and its axles or wheels. Its function is to transmit forces and torque between the wheels and the frame, while cushioning impacts from uneven road surfaces to the frame or body, and dampening the resulting vibrations to ensure smooth driving. 2. Automotive suspension systems are divided into two types: non-independent suspension and independent suspension. In a non-independent suspension, the wheels are mounted at both ends of a solid axle, so when one wheel moves, the other wheel responds accordingly, causing the entire body to vibrate or tilt. In an independent suspension, the axle is split into two sections, with each wheel independently mounted to the frame via coil springs. When one wheel moves, the other wheel remains unaffected, allowing both wheels to move independently, thereby improving the vehicle's stability and comfort.
3
0
Share

What is the purpose of fuel system cleaner?

Fuel system cleaner is essentially a general term for a category of cleaning agents. Using such products can significantly reduce the emission of harmful substances in vehicle exhaust, help vehicles pass exhaust emission tests, restore engine power, and improve engine efficiency and fuel economy. The related details are as follows: 1. When the engine is running, it generates extremely high temperatures. Under these high temperatures, unstable components in the fuel are prone to oxidation and condensation reactions, forming gum and carbon deposits that accumulate on the intake valves and fuel injectors. 2. On the other hand, for fuel-injected engines, each time the cylinder operates, fuel is injected before ignition. The moment the engine is turned off, ignition is immediately cut off, but the fuel injected during this cycle cannot be recovered and instead adheres to the intake valves and combustion chamber walls. Under the engine's high temperatures, the gasoline easily evaporates, but the wax and gum substances in the gasoline remain. Over time, these wax and gum substances accumulate and thicken, hardening upon repeated heating to form carbon deposits. 3. For technologically advanced turbocharged engines and direct fuel injection engines, under the common low-speed, high-temperature conditions in urban driving, combustion is not as complete, making them equally prone to carbon deposits.
19
4
Share

Is the Depreciation Period for Cars 5 Years or 4 Years?

The new tax law stipulates that the depreciation period for cars is 4 years. Article 60 of the "Implementing Regulations of the Enterprise Income Tax Law of the People's Republic of China" stipulates: 20 years for houses and buildings; 10 years for airplanes, trains, ships, machinery, mechanical equipment, and other production equipment; 5 years for utensils, tools, furniture, etc. related to production and business activities; 4 years for means of transportation other than airplanes, trains, and ships; and 3 years for electronic equipment. The details are as follows: 1. Relevant regulations: The "Implementing Regulations of the Enterprise Income Tax Law of the People's Republic of China," which came into effect on January 1, 2008, stipulates that the minimum depreciation period for means of transportation other than airplanes, trains, and ships is 4 years. 2. Enterprise depreciation period: For cars purchased by enterprises before 2008, the depreciation period is determined to be 5 years according to the "Measures for Deduction Before Enterprise Income Tax," which does not violate the stipulations of the "Implementing Regulations of the Enterprise Income Tax Law of the People's Republic of China," and there is no need to adjust the depreciation period.
2
5
Share

How to Turn on the Rear Air Vents in the Teana?

The switch for the rear air vents in the Teana is located at the rear side of the front center armrest. Simply rotate the dial to open them. Reasons why the rear vents may not blow hot air: 1. The valve in the rear vents may be faulty, causing poor opening. If the plastic components of the valve age or screws come loose, preventing normal operation, it can affect airflow. In this case, you can gently pry the valve open with a tool or take it to a repair shop for servicing. 2. Poor duct design. If the air ducts are too long, the heat may dissipate before reaching the rear vents, resulting in lukewarm air. There is no fundamental solution for this issue, but you can try increasing the fan speed to boost airflow. 3. Damaged ducts. The air ducts in car air conditioners are made of plastic and may degrade or wear out over time due to interference with other components. If the ducts are damaged, hot air may leak out. In this case, visit a 4S shop or repair shop for inspection and replacement. 4. Clogged ducts or air filter. Over time, debris such as leaves, lint, dust, and insect remains can accumulate in the engine compartment, blocking the ducts and reducing airflow efficiency. A dirty air filter can also decrease airflow. To resolve this, clean the ducts and regularly check the condition of the air filter.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.