What is the license category for small cars?

1 Answers
KiaraMarie
07/29/25 3:33am
There are two types of small car licenses: C1 and C2. Relevant information is as follows: 1. C1: C1 is a manual transmission driver's license, which allows driving small and micro passenger vehicles, light and micro cargo vehicles, as well as light and micro special-purpose vehicles. It also permits driving vehicles under categories C2, C3, and C4. 2. C2: C2 is an automatic transmission driver's license, which allows driving small and micro automatic transmission passenger vehicles, as well as light and micro automatic transmission cargo vehicles. The conditions for obtaining the license are as follows: 1. Vision requirements: Naked eye or corrected vision must reach 5.0 or above. No red-green color blindness. 2. Hearing requirements: The ability to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork. The body and limbs must be sound, with no motor dysfunction or other issues.
Was this review help?
2
0
Share
More Forum Discussions

What are the differences between Audi A6 40 and 45?

Audi A6 40 and 45 differ in terms of power performance, tire size, etc. Here are the specific details: Power Performance: Both the 40/45 models are equipped with a 2.0T turbocharged engine, while the 55 model features a 4.0-liter V8 turbocharged gasoline engine, currently mainly used in the Audi A8L. The 40T, as the entry-level powertrain, offers a maximum output of 190 horsepower, 140 kW power, and 320 Nm torque. In contrast, the 45T provides a maximum output of 224 horsepower, 165 kW power, and 350 Nm torque. Additionally, the maximum torque RPM tuning differs between the two. The 40T ensures sufficient power for daily commuting, while the 45T offers more robust power assurance. Both models are paired with a 7DCT dual-clutch transmission. Despite the Audi A6L's large size, its fuel consumption ranges from 9-10L per 100 km. Tire Size and Wheel Design: As an entry-level model, the 40T comes with 225-55/R18 tires, and the base wheel features a somewhat plain 10-spoke design in a slightly white finish, which is relatively simple. The 45T/55T entry-level models share the same tire size as the 40T, but mid-to-high trims offer larger 245-45/R19 and 255-40/R20 tires with smoked black wheels. These upgrades significantly enhance both visual appeal and grip. However, the wider tires and lower aspect ratio inevitably lead to increased fuel consumption. Nevertheless, thanks to the improved grip, the mid-to-high trims of the 45T/55T deliver a superior driving experience.
10
1
Share

How to Replace the Coolant in a Buick Excelle?

Before completely replacing the coolant in a Buick Excelle, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes. Pay special attention to the five-way water pipe, which gets its name from having five connecting interfaces to different parts. The coolant flows through this pipe and is then distributed to various sections of the car to function. If there is any coolant leakage in this area, replace the water pipe or resecure the connections as needed. Drain the old coolant and then flush the fluid channels with clean water. Add water to the coolant reservoir and continue filling it until clean water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will appear slightly pinkish. Keep adding clean water until the outflow is clear. Remember to remove the heater hose to drain all water from the heater core. After draining for about an hour, add the new coolant through the radiator hose to allow it to flow quickly into the radiator. Then, fill the coolant reservoir with another bottle of coolant until it is nearly full. Start the engine and let it run for about 10 minutes. As the cooling system expels some air, the coolant level will drop. Top it up again until it reaches the "MAXT" mark on the reservoir. Can different coolants be mixed? Always use the same brand of coolant. Different brands may have varying formulations, and mixing them could cause chemical reactions between additives, rendering them ineffective.
20
2
Share

Where is the automatic transmission computer located in the Passat Lingyu?

Passat 1.8t automatic transmission computer board is located in the engine compartment under the hood, next to the battery. Introduction to the transmission: The transmission consists of a transmission mechanism and a control mechanism. It has evolved from manual transmissions in the past to continuously variable transmissions (CVT) today, allowing the engine to operate with lower fuel consumption at higher power levels. The transmission can change the vehicle's rotational speed and expand the driving wheel's torque and speed. Classification of transmissions: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were primarily 4AT. AT achieves automatic shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission with fewer parts and a compact size. DCT has two clutches.
17
3
Share

What type of engine oil should be used for the China VI Fengjun 5?

Fengjun 5 Fengjun 5 diesel version can use C35W-30 engine oil. Engine oil composition: Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining the basic properties of the lubricating oil, while additives are an important part of the lubricating oil. Types of engine oil: The winter oil grades in the SAE lubricating oil viscosity classification are: 0W, 5W, 10W, 15W, etc. The symbol W stands for winter, and the smaller the number before W, the lower the low-temperature viscosity and the lower the applicable minimum temperature. The summer oil grades in the SAE lubricating oil viscosity classification are: 20, 30, 40, 50. The larger the number, the higher the viscosity and the higher the applicable maximum temperature.
14
2
Share

Which country is the Teana produced in?

Teana is produced in Xiangyang City, Hubei Province. Introduction to Teana: Teana is a flagship mid-to-high-end luxury sedan under NISSAN. With innovative technology, Teana perfectly combines Driving Technology (Precision Driving Engineering) and Comfort Technology (Absolute Comfort Engineering), bringing the design concept of mid-size sedans to a new level. Exterior Design: The Teana newly introduced red-black and white-black dual-color exteriors. Except for the entry-level 2.0L model, all variants are equipped with 17-inch or larger wheels, LED headlight clusters, and LED daytime running lights. Additionally, the model offers a Phantom Package, which includes unique exterior accessories such as blackened rear emblems, chrome front grille trim, wheels, rear spoilers, and Midnight personalized rear emblems.
4
2
Share

Does Car Polishing Affect the Paint?

Car polishing does not affect the paint. Here is the relevant introduction about car polishing: 1. Definition: Car polishing is a process in car detailing that involves polishing the vehicle before waxing, sealing, or coating. This is because paint sealing and coating require prior polishing, and only a finely polished car can achieve a mirror-like finish. 2. Function: It reduces the roughness of the paint surface, removes fine scratches and spots, and can eliminate oxidation layers, making the paint surface shinier. 3. Reason: Dust in the paint booth can get into the paint, and after painting, some areas may have imperfections that require sanding to make the paint surface feel smoother. This ensures no color difference between the new and old paint, making it look as if no repainting was done.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.