···
Log in / Register

What is the letter order of license plates in Jiangsu Province?

4 Answers
MasonAnn
09/02/25 3:36am
Jiangsu license plate letters range from Su A to Su N, representing: Su A is Nanjing, Su B is Wuxi, Su C is Xuzhou, Su D is Changzhou, Su E is Suzhou, Su F is Nantong, Su G is Lianyungang, Su H is Huaian, Su J is Yancheng, Su K is Yangzhou, Su L is Zhenjiang, Su M is Taizhou, Su N is Suqian. License plates serve as identification and registration for vehicles, with the following main functions: 1. The license plate indicates the vehicle's region of registration. 2. The license plate can be used to identify the vehicle's owner and registration details.
Was this review help?
14
2
Share
MadelynMarie
09/14/25 5:53am
When it comes to the alphabetical order of license plates, I find Jiangsu Province's system quite logical. I often drive across the province and remember it starts with A for Nanjing, the provincial capital; B for Wuxi, an industrial hub; C for Xuzhou, the northern gateway; D for Changzhou; E for Suzhou, the pearl of Jiangnan; F for Nantong; G for Lianyungang, the port city; H for Huai'an; J for Yancheng (skipping I to avoid confusion); K for Yangzhou; L for Zhenjiang; M for Taizhou; and N for Suqian. This sequence basically follows the geographical layout, from west to east and north to south, making it easy to identify a vehicle's origin at a glance on the road. License plates are like a car's ID card, and learning them can enhance road safety awareness by preventing misjudgments. For me, memorizing this order helps in planning routes during long trips, especially when navigation fails—just glancing at nearby license plates gives a rough idea of my location.
Was this review help?
9
3
Share
Expand All
LilahDella
10/28/25 6:36am
I'm quite familiar with the license plate letter sequence in Jiangsu. I've driven there many times, from A Nanjing, B Wuxi, C Xuzhou, D Changzhou, E Suzhou, F Nantong, G Lianyungang, H Huai'an, J Yancheng, K Yangzhou, L Zhenjiang, M Taizhou, to N Suqian. The letters I and O are skipped to avoid confusion with numbers 1 and 0, which is common on the road. The license plate design considers practicality, with the letter sequence reflecting city importance or location - like Suzhou being ranked quite early due to its proximity to Shanghai. This ordering reminds me of how to quickly identify unfamiliar vehicles, especially when queuing at highway toll stations, where guessing a vehicle's origin by its license plate has been quite helpful. Additionally, this system also reflects provincial administrative efficiency, which is quite interesting.
Was this review help?
11
3
Share
Expand All
LeCecilia
12/11/25 6:52am
I have studied the arrangement of license plates. In Jiangsu, the order is A for Nanjing, B for Wuxi, C for Xuzhou, D for Changzhou, E for Suzhou, F for Nantong, G for Lianyungang, H for Huai'an, J for Yancheng, K for Yangzhou, L for Zhenjiang, M for Taizhou, and N for Suqian. The sequence is straightforward and easy to remember.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

How to Upgrade the Car Central Control Screen?

For some higher-end models, the navigation system is fundamentally deeply integrated with the vehicle's onboard system. Generally, there are no universal or simple upgrade programs available, so you can only contact a 4S dealership for professional upgrades. Deep OEM Integration: For some higher-end models, the navigation system is fundamentally deeply integrated with the vehicle's onboard system. Typically, no universal or simple upgrade programs are provided, so you must contact a 4S dealership for professional upgrades. Of course, many upgrade programs are available online, but it's difficult for the average car owner to complete the upgrade independently. Standard OEM Integration: These navigation systems usually integrate third-party systems like KLD, DDT, or Mapbar, which often run on Windows CE. The navigation data is typically stored on a TF card, and upgrades can generally be performed using the manufacturer's dedicated upgrade program. Of course, there are many cracked map versions available online, but they require some DIY skills.
7
2
Share

What is the correct procedure for parking an automatic transmission car?

Correct procedure for parking an automatic transmission car: 1. Apply the brake to slow down to a complete stop; 2. After coming to a full stop, shift to N (Neutral) gear; 3. Engage the parking brake; 4. Release the foot brake and ensure the vehicle is stationary; 5. Press the foot brake again, shift to P (Park) gear, and turn off the engine. It's recommended to refer to your vehicle's owner's manual for specific correct procedures. Common automatic transmission gears include P (Park), N (Neutral), R (Reverse), D (Drive), L (Low), S (Sport), and M (Manual) gears. Among these, P is for parking, N is neutral, R is reverse, D is drive, L is low gear (also called hill climbing gear), S is sport mode, and M is manual mode.
2
0
Share

Hazards of Excessive or Insufficient Clutch Free Play

Excessive clutch free play will prevent complete clutch disengagement, making gear shifting difficult while accelerating wear on the driven plate, pressure plate and flywheel, thereby reducing the clutch service life. Insufficient clutch free play will cause clutch slippage during engagement, resulting in reduced vehicle power and accelerated clutch wear. The hazards of improper clutch pedal free play are as follows: 1. When clutch pedal free play is too small or nonexistent, the inner end of the release lever contacts the release bearing end face; 2. This effectively applies a separating force to the pressure plate, easily causing clutch slippage during operation and unreliable power transmission, while intensifying wear on the driven plate, pressure plate and flywheel - severe cases may even lead to burning; Additionally, it accelerates wear on the release bearing and release lever tip; 3. Excessive clutch pedal free play reduces the clutch separation stroke, resulting in incomplete clutch disengagement that makes transmission gear shifting difficult, while accelerating wear on the driven plate, pressure plate and flywheel, shortening the clutch service life.
7
3
Share

What is the engine model of the Toyota Camry?

Toyota Camry's engine model is 6AR-FSE. The Camry is a vehicle under GAC Toyota, with body dimensions of 4885mm in length, 1840mm in width, and 1455mm in height, and a wheelbase of 2825mm. Taking the 2019 Camry as an example: it is equipped with three major powertrains: TNGA 2.5L HEV, TNGA 2.5L, and TNGA 2.0L, including ten models across three series: Luxury, Sport, and Hybrid. The vehicle has added or upgraded multiple configurations: the flagship, luxury, and sport versions now feature smart rain-sensing wipers; the luxury and sport versions have been upgraded to a 9-inch color touchscreen display with a smartphone connectivity system, a 10-inch color HUD head-up display system, and an added onboard voice navigation system; the flagship version now includes a rear 220V power outlet.
12
1
Share

Which Types of Tire Cracks Require Replacement?

Tires should be replaced immediately under the following circumstances: 1. 'New tires' stored for more than 5 years; 2. Tires with bulges; 3. Tires with tread patterns less than 1.6mm; 4. Generally, tires have a service life of 4 years or 80,000 kilometers, and replacement is recommended if either condition is exceeded. Below is an introduction to tire crack conditions: 1. Natural rubber aging causes cracks. Typically, after 4-5 years of use, some fine cracks may appear on tires. These cracks are referred to as 'weather checking.' Such tires become hard, produce loud noise, and start losing rubber properties, indicating they need replacement. 2. External impacts or scratches cause cracks. Usually resulting from traffic accidents or curb scratches while parking, tires with cracks that do not damage the cord layer can still be used, but those with cord layer damage require prompt replacement.
4
1
Share

Can the car be driven if the warning light is on and the car is shaking?

As long as the warning light is on, it indicates that there is a problem with a certain component of the car. However, if the car can still move, it means the issue is not particularly severe, because if there were a very serious fault, a red warning light would illuminate. If the engine warning light is yellow, drive to the nearest repair station as soon as possible for inspection and repair. Additional information: 1. Poor idling is usually caused by issues with the intake system and fuel injection control system, and occasionally by mechanical faults in the engine. 2. Common causes of poor idling include: leaks in the intake system; malfunctioning of the cold start injector and temperature-time control switch; abnormal fuel supply pressure in the fuel injection system; poor fuel atomization due to injector faults; and ECU malfunctions.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.