What is the letter for neutral gear?

2 Answers
VanKate
07/25/25 2:42am
Neutral gear is indicated by the letter N and can be used when starting the car or towing. When waiting for a signal or in traffic jams, the gear lever is often kept in the D position while the brake is pressed. If the stop is very short, this is acceptable, but for longer stops, it is recommended to shift to N and engage the handbrake. The gears in an automatic transmission: 1. P stands for Park, used when parking the vehicle, including when turning off the engine or idling for a long time; 2. R stands for Reverse, used when reversing the vehicle; 3. D stands for Drive, used when moving forward. In this position, the transmission automatically shifts between 1 and the highest gear based on the vehicle's speed and throttle position; 4. S stands for Sport mode, where the transmission delays shifting to keep the gear at higher RPMs longer, increasing the vehicle's power.
Was this review help?
14
5
Share
DeStephen
08/10/25 4:42pm
I remember when I first learned to drive, the instructor pointed at the gearshift and said: 'Neutral is that big 'N', which stands for Neutral. When you shift into it, the car won't move forward or backward. Although the engine is running, the wheels are completely free, like hitting the pause button. Shifting into neutral at red lights or during short stops can save some fuel and reduce wear on the transmission. Nowadays, most new cars are automatic, and I've long gotten used to those letters P, R, D, but it took some getting used to at first. After driving for a while, I developed the habit of shifting into neutral before turning off the engine to prevent the car from moving unexpectedly. This is especially important for new drivers—otherwise, parking on a slope and rolling away can be dangerous. In short, remember this 'N'. Simply put, it's the neutral state of the transmission, making driving safer and more worry-free.'
Was this review help?
9
0
Share
Expand All
More Forum Discussions

Should I Choose Manual or Automatic for Driver's License Application?

It is recommended to learn C1, which is a manual transmission vehicle, for the driver's license test. The C1 driver's license allows driving small cars, micro passenger vehicles, light and micro cargo vehicles, as well as light, small, and micro special operation vehicles. It also permits driving C2, C3, and C4 vehicle types. On the other hand, the C2 license only allows driving small automatic transmission vehicles (C2), micro automatic transmission passenger vehicles, and light and micro automatic transmission cargo vehicles. The differences between manual and automatic transmissions are: 1. The vehicle types used during the learning process are different: C1 (manual transmission) license training uses manual transmission vehicles, while C2 (automatic transmission) uses automatic transmission vehicles. 2. Tuition fees and driving difficulty vary: The registration fee for C1 (manual transmission) is relatively higher than that for C2 (automatic transmission), and the operation difficulty coefficient for C1 is higher, resulting in a higher pass rate for C2. 3. Driving vehicle types differ: A C1 license holder can drive automatic transmission vehicles, but a C2 license holder cannot drive manual transmission vehicles. This is because manual transmission vehicles have a higher operation difficulty coefficient, and those accustomed to driving automatic transmission vehicles may not handle manual transmission vehicles well.
8
0
Share

How Long Does It Take for a BMW to Arrive at the Dealership from the Port?

It generally takes 10 days to half a month for a BMW to arrive at the dealership from the port. Documents that must be provided by the 4S store when picking up the car: For example, the purchase invoice, certificate of conformity, vehicle consistency certificate, motor vehicle registration certificate, warranty certificate, vehicle user manual, new vehicle delivery confirmation form, etc. If the 4S store is responsible for license plate registration and insurance processing, you will also need to obtain the original insurance policy, insurance invoice, compulsory traffic insurance invoice, vehicle and vessel tax invoice, purchase tax invoice, tax payment certificate, and compulsory traffic insurance label from the salesperson. If any of the above documents are missing, you should promptly request them from the 4S store. Precautions when picking up the car: First, visually inspect the body paint for scratches, spots, dents, or wear; check the vehicle identification plate, which is located on the driver's side door or in the engine compartment, and pay attention to whether the manufacturing date is too far in the past; inspect the windshield—if the glass is more than a year older than the vehicle's production date, it is likely that the glass has been replaced; open the engine hood and check if the engine compartment is clean—if the vehicle has been stored for a long time or used, there may be noticeable dust or stains in certain areas.
10
2
Share

What is the reason for the fan continuing to run after parking?

The reason for the fan continuing to run after parking is that the engine coolant temperature at the moment of parking is higher than the acceptable soaking temperature of the engine. The vehicle's computer automatically calculates the fan's operating speed and duration to control the fan's operation. The higher the engine temperature, the longer the fan runs after parking. When the engine coolant temperature drops below the soaking temperature, the fan turns off to protect the engine and extend its service life. If the fan continues to run after the engine temperature has already dropped, it may be due to a loose electrical connection. In this case, you can try disconnecting the fan's wiring harness to cut off power separately. The function of the car fan is to increase the airflow speed through the radiator core, enhance cooling efficiency, and accelerate water cooling. The fans used in car engines are classified into axial-flow fans and centrifugal fans based on their structural principles, and into mechanically driven and electrically driven based on their driving methods. The working principle of the car cooling fan is based on electromagnetic induction. It uses a Hall sensor component as a synchronous detection device to control a set of circuits, switch the energizing sequence of the windings, generate a rotating magnetic field, and achieve electromechanical integration for electronic commutation. The cooling fan is installed between the engine and the radiator. When the fan blades rotate driven by the engine, they generate high-speed airflow to carry away the heat from the coolant in the radiator, thereby achieving the purpose of cooling the engine.
12
2
Share

What are the reasons for increased fuel consumption?

The following factors affect car fuel consumption: 1. Displacement: The engine displacement has a certain impact on car fuel consumption, but this impact is a fixed value. 2. Tire pressure: Car fuel consumption is also directly related to tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. 3. Road conditions: The road conditions on which the car is driven will also affect fuel consumption. 4. Combined fuel consumption: This is calculated by dividing the total emissions of urban and suburban driving cycles by the total mileage completed in these two cycles, and then using the emissions to calculate the corresponding fuel consumption value.
9
5
Share

Which documents should be carried when driving a motor vehicle?

When driving a motor vehicle, you only need to carry your driver's license. The following is an introduction to automobile driver's licenses: 1. Definition of motor vehicle driver's license: It refers to the legal certificate issued by the administrative department after the person who is legally allowed to learn to drive a motor vehicle has studied and mastered the knowledge of traffic regulations and driving skills, and passed the examination, which permits driving a certain type of motor vehicle. 2. Examination subjects for motor vehicle driver's license: include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
10
0
Share

Why is the Auto Start-Stop Function Not Working?

Reasons why the auto start-stop function is not working: 1. Accidentally pressing the auto start-stop button on the car, causing the system to shut down; 2. The engine has not reached the normal operating temperature, the automatic air conditioning has not reached the preset temperature, the battery storage is insufficient, the steering wheel is turned after parking, the vehicle is in emergency braking, or reversing—these situations will not activate the auto start-stop function; 3. The auto start-stop system is malfunctioning, possibly due to wiring issues or other reasons causing the system to fail. The engine auto start-stop function automatically shuts off the engine when the vehicle comes to a temporary stop during driving; when it's time to move forward again, the system automatically restarts the engine.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.