What is the length of the Volkswagen Lavida sedan?

1 Answers
ErinFitz
07/30/25 1:49am
Generally, the length of a sedan is around 4.8 meters. The relevant introduction about vehicle length is as follows: Concept of Vehicle Length: The distance between the two extreme points in the length direction of the car, that is, the distance from the most protruding position of the front bumper to the most protruding position of the rear bumper. Classification based on sedan length: Mini car (A00): length less than 3.7M; Small car (A0): length less than 4.3M; Compact car (A): length less than 4.6M; Mid-size car (B): length less than 4.9M; Full-size car (C): length less than 5.1M; Luxury car (D): length greater than 5.1M.
Was this review help?
13
3
Share
More Forum Discussions

What Causes the Steering Wheel of S90 to Make Abnormal Noises When Turning?

When a car makes abnormal noises while turning during driving, it may be due to a malfunction in the vehicle's steering system. Below is an introduction related to the steering wheel: 1. Introduction to the steering wheel: A wheel-shaped device used to control the direction of movement in cars, ships, airplanes, etc. 2. Function of the steering wheel: The steering wheel is generally connected to the steering shaft via splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger diameter steering wheel reduces the hand force required from the driver when turning. The steering transmission shaft, as a connecting component between the steering gear and the steering shaft, facilitates the generalization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel more reasonable in the vehicle.
17
5
Share

How to Set Up Wireless Charging on the Lynk & Co 03?

The method to set up wireless charging on the Lynk & Co 03 is as follows: 1. Click the function button on the central display screen; 2. Swipe down the page to find and click on the settings; 3. Click on Smart Connectivity to enable NFC and wireless charging. Taking the 2021 Lynk & Co 03 as an example, it belongs to the compact car category, with body dimensions of length 4639mm, width 1840mm, height 1472mm, and a wheelbase of 2730mm, with tire specifications of 205/60R16. The 2021 Lynk & Co 03 is equipped with a 1.5T turbocharged engine, with a maximum power of 115kW, maximum power speed of 5000rpm, maximum torque of 245Nm, maximum torque speed ranging from 1450 to 4000rpm, paired with a 6-speed manual transmission.
17
3
Share

How to Reset the Maintenance Light on a 2012 Chevrolet Cruze?

About the detailed explanation of how to reset the maintenance light on a 2012 Chevrolet Cruze: 1. Cause of the issue: As the driving time of the Chevrolet Cruze increases, the wear and tear of internal components will gradually become more severe. To ensure the normal operation of the Chevrolet Cruze, manufacturers have set up some reminder indicator lights during production. After reaching a certain mileage, owners need to replace the components in time. After successful replacement, the maintenance light of the car also needs to be reset. 2. Solution: Turn off the ignition switch. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch. After about 3 seconds, release the two arrow buttons. The maintenance menu will appear, asking if you want to reset. Press and hold the SET (reset) button for more than 3 seconds. Press the MODE button. Turn off the ignition switch to complete the reset.
11
5
Share

What are the differences between imported and domestically produced Audi cars?

Audi imported and domestically produced cars differ in the following aspects: 1. Wheel size: Imported Audi cars are equipped with 20-inch wheels, while domestically produced ones come with 17-inch and 19-inch wheels. 2. Wheelbase: The imported Audi has a wheelbase of 2800mm, whereas the domestically produced version has a wheelbase of 2733mm. 3. The imported Audi features chrome-plated front grille and fog lights, while the domestically produced version does not have this chrome treatment. Audi's lineup includes models such as the Audi A3, Audi A5, Audi A6L, Audi Q3, and Audi S4. Taking the 2020 Audi A6L as an example, it is equipped with a five-link independent suspension at both the front and rear, powered by a 2.0T turbocharged engine delivering a maximum horsepower of 190PS, maximum power of 140kW, and maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
8
4
Share

What is the maximum wading depth of the Hongqi H5?

According to official information, the maximum wading depth of the Hongqi H5 is 15 cm. Common tire specifications include 225/45R19 and 225/55R17, with a body length of 4945 mm. The car is equipped with a 6-speed automatic transmission and a 7-speed wet dual-clutch transmission, featuring a 4-door, 5-seat sedan body structure. The maximum wading depth refers to the deepest water a vehicle can safely pass through. Generally, the maximum wading depth for sedans does not exceed 30 cm, while SUVs have a higher maximum wading depth, though it is still advisable not to exceed 50 cm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 30 cm, the Audi A4 has 32 cm, the Volkswagen Sagitar has 30 cm, the Land Rover Range Rover has 90 cm, the Jeep Compass has 48 cm, and the Highlander has 45 cm. The maximum wading depth of SUVs is significantly higher than that of sedans. Generally, when a vehicle is wading through water, different measures should be taken by the owner depending on the depth and the vehicle's characteristics, as follows: If the wading depth reaches the height of the exhaust pipe, it is relatively safe. Even if water enters the exhaust pipe, the pressure inside is sufficient to expel it. As long as the engine is not turned off in the water, water will not flow back into the vehicle. If the wading depth reaches the height of the door frame, it becomes more dangerous. The vehicle's circuits, electronic components, and sensors are mostly concentrated at the bottom, which may lead to circuit disconnection, damaging critical electrical components and preventing the car from starting normally. If the wading depth reaches the height of the intake pipe, it is extremely dangerous. Driving directly into such conditions may cause the vehicle to stall immediately, resulting in permanent engine damage or rendering it unusable.
3
0
Share

Can ETC be replaced in a different location if it's broken?

If you find that your ETC is broken while traveling in a different location, you can have it replaced there. Simply bring your valid ID, vehicle registration, and the original OBU device to a bank ETC service outlet for a free replacement. Be sure to avoid exposing the electronic tag to water, impact, high temperatures, or strong magnetic fields during daily use. ETC devices come in two types: solar-powered and wired charging. Solar-powered ETC devices do not require charging, while wired charging ETC devices need to be charged using a charger. Both types of ETC electronic tags contain internal batteries. Solar-powered ETC devices do not require charging during regular driving, and their lithium batteries typically last about 3 years under normal use. However, for those who use ETC infrequently, it is recommended to charge the ETC device every 3 months to mitigate the effects of natural battery discharge and prolong its lifespan. ETC stands for Electronic Toll Collection, an electronic toll payment system. To apply for ETC, you need to provide the vehicle owner's valid ID and vehicle registration (original and copies). If someone else is applying on behalf of the owner, they must also bring their own valid ID. The vehicle registration copy should include the page with the most recent annual inspection stamp. Additionally, you'll need a bank card for deducting highway tolls, be aged between 18 and 60, and own the vehicle in your name. How ETC works: The onboard electronic tag, installed on the vehicle's windshield, communicates with the microwave antenna in the ETC lane at toll stations. This enables seamless toll payment via computerized banking transactions, allowing vehicles to pass through highway or bridge toll stations without stopping. Benefits of installing ETC: Saves time: Eliminates the hassle of waiting in queues. Green and eco-friendly: Reduces noise and exhaust emissions by enabling vehicles to pass through toll stations without stopping. Reduces wear and tear: Lowers costs by minimizing vehicle start-stop cycles, reducing wear and fuel consumption. Users also enjoy toll discounts. Improves efficiency: ETC lanes can theoretically process vehicles 2-3 times faster, making traditional ETC more advanced and efficient. Compared to license plate payment, ETC technology is more mature and advantageous.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.