What is the length of the Volkswagen Lavida Plus?

1 Answers
Shirley
07/29/25 10:37pm
The body dimensions of the Lavida Plus are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm. Introduction to Lavida: The all-new Lavida Plus has undergone significant upgrades in body dimensions, leading its class with a presence close to that of a B-segment sedan. The 4,670mm length and 1,806mm width surpass mainstream competitors in the same category. The extended length and width create more elegant and flowing body lines, achieving a "mini-Passat" visual effect typically seen in B-segment vehicles. Additionally, the 2,688mm wheelbase—78mm longer than the current Lavida model—significantly enhances interior space, delivering a more comfortable driving experience. The all-new Lavida Plus comes standard with an EPB electronic parking brake featuring AutoHold functionality, improving operational convenience while eliminating the traditional handbrake for a cleaner, more premium interior design—a leading configuration in its class. Lavida's features: The all-new Lavida Plus is equipped with an ESP dynamic electronic stability system integrating 23 functions, along with standard RKA intelligent tire pressure monitoring and other active safety features. It will be powered by a high-output 1.4TSI engine delivering improved power and torque over the current model's 1.4TSI unit, while also introducing a new 1.5L naturally aspirated engine featuring multiple optimizations (including VVT on exhaust side, new variable displacement oil pump, and linerless connecting rods). This engine produces 150N.m of maximum torque, 85kW rated power, and achieves a combined fuel consumption as low as 5.5L/100km.
Was this review help?
2
1
Share
More Forum Discussions

What are the differences between imported cars and joint-venture cars?

Imported cars and joint-venture cars differ in that imported cars are wholly imported, while joint-venture cars are either wholly domestically produced or assembled in China with some imported parts. Additionally, there may be some detailed modifications to the models. The specific differences are as follows: 1. Parts suppliers. Joint-venture cars refer to finished products of foreign brands manufactured in China. Even though they are made-in-China products, they apply the "tricks" of foreign brands in terms of design, technology, production lines, etc. Moreover, many parts are produced abroad. In fact, parts for purely imported models are also produced in different countries and factories. 2. Quality and craftsmanship. In the perception of most people, the quality of imported cars is definitely higher than that of joint-venture cars. However, current domestic car manufacturers also use internationally standardized production processes, tools, etc., and have comprehensive quality control procedures. 3. Core technology. The engine, chassis, transmission, etc., constitute the core components and technology of a car. The production of joint-venture car companies in China is step-by-step, with processes such as stamping, welding, painting, and final assembly closely linked. Most joint-venture car companies in China also have their own engine and transmission factories, introducing foreign brand technologies, so the core technology is not too inferior. 4. The "Chinese characteristics" of joint-venture cars. As is well known, when foreign brands enter China, configurations such as bumpers, daytime running lights, and ESP will inevitably suffer from "reduction". However, it can be assured that even if the car is reduced in configuration, the safety, handling, and ride comfort can still be guaranteed. Therefore, joint-venture cars with "Chinese characteristics" are not much inferior to imported models.
4
5
Share

How many points will be deducted for driving a new car without license plates?

If a new car is driven on the road without hanging the vehicle license plate as required, the driver will be deducted 6 points and fined. A new car without a license plate should still have a temporary license plate. If the temporary license plate is not placed as required, it also constitutes "violation of not hanging the vehicle license plate as required." License plate hanging position: The motor vehicle license plate should be hung at the designated position in front of and behind the vehicle, keeping it clear and complete. For heavy and medium-duty freight motor vehicles and their trailers, tractors and their trailers, the enlarged license number should be painted on the body or the rear of the carriage, with upright characters and clear handwriting. Temporary license plate position: The temporary driving license plate should be placed on the inside of the front windshield of the motor vehicle. For motor vehicles without a cab, it should be carried with the vehicle.
10
5
Share

How Often Should Engine Coolant Be Added?

Automotive antifreeze only needs to be replenished every two to three years. Methods for draining antifreeze: There are three locations where it can be fully drained: the lower part of the radiator; the lower part of the engine; and the small heater core inside the vehicle. It is important to note that after draining, the vehicle should be started for 5 seconds and then turned off (when the engine is cold). Precautions for replacing antifreeze: Generally, when replacing antifreeze, if the new antifreeze is of the same type (either ether or ethylene glycol), there is no need to worry about completely draining the old one. If switching to a different type of antifreeze, after draining the old antifreeze, you can add clean water 1-2 times, run the engine, and then add the new antifreeze. This minimizes the residual content of the old antifreeze. Even if some water remains, it won't cause any issues since all antifreeze contains water. After replacing with new antifreeze, be sure to check its specific gravity, as levels that are too high or too low are not ideal.
20
4
Share

What is required to change the location of a driver's license?

To change the location of a driver's license, you need to bring your ID card, driver's license, and three one-inch color photos with a white background to the local vehicle management office to complete the transfer procedure for an out-of-town driver's license. For non-local residents, a residence permit is required, provided that the driver's license is in a normal status. Legal provisions: According to Article 58 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if a motor vehicle driver's household registration is moved out of the jurisdiction of the original vehicle management office, they should apply for a license replacement at the vehicle management office of the new location. Detailed method: Motor vehicle drivers residing outside the jurisdiction of the issuing vehicle management office can apply for a license replacement at the vehicle management office of their residence. When applying, they should fill out an application form, submit the motor vehicle driver's identity proof and motor vehicle driver's license, and declare their physical condition.
7
4
Share

Will driving in the wrong direction on the highway definitely be captured by cameras?

Driving in the wrong direction on the highway will definitely be captured by cameras. Generally, one-way road sections are equipped with surveillance cameras or electronic monitoring devices. Once a violation of driving in the wrong direction occurs, the probability of being captured is very high, almost 100%. Judgment when just entering the wrong direction: If you can promptly judge upon entering the wrong direction that it is a one-way road and you are going against traffic, you should make a U-turn as quickly as possible without affecting other vehicles and proceed in the correct direction. This may give you a chance to avoid being captured. (On highways, driving in the wrong direction, reversing, or making a U-turn is absolutely prohibited; you must proceed directly to the next exit.) Handling the situation if driving in the wrong direction: If you realize you are accidentally driving in the wrong direction on the highway, you should immediately pull over to the emergency lane while ensuring traffic safety, turn on the hazard lights, move to a safe area outside the guardrail, place a warning triangle 100 meters in front of the vehicle, and then contact the traffic police. Cooperate fully with the authorities when they arrive at the scene.
2
4
Share

What kind of paint won't peel off when sprayed on plastic?

Plastic sprayed with air-drying acrylic paint won't peel off. This is commonly known as plastic paint. Air-drying acrylic coatings are mainly used in architectural coatings, plastic coatings, electronic coatings, road marking paints, etc. They have the advantages of rapid surface drying, easy application, and obvious protective and decorative effects. The disadvantages are that the solid content is not easy to be too high, hardness and elasticity are difficult to balance, a thick coating film cannot be obtained in one application, and the fullness of the coating film is not ideal. Characteristics of automotive paint: Automotive paint must not only have good mechanical properties, good fullness, and high gloss, but also have good adhesion, high hardness, and strong scratch resistance. At the same time, it must have good weather resistance, scratch and wear resistance, gloss durability, and excellent resistance to gasoline, alcohol, acid, alkali, and salt spray. Function of automotive paint: Automotive paint coating involves applying a film on the car's paint surface to protect the gloss of the paint from fading and to provide a physical protective film on the paint surface, thereby achieving the purpose of protecting the paint.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.