···
Log in / Register

What is the length of the Volkswagen CC?

4 Answers
AlexanderLee
09/04/25 7:33am

The length, width, and height dimensions of the Volkswagen CC are 4869mm/1870mm/1459mm and 4865mm/1870mm/1459mm, which are official data. The length of the Volkswagen CC refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Volkswagen CC has a maximum power of 162kW and a maximum torque of 350 Nm. This engine delivers a maximum horsepower of 220 and a maximum torque range of 1500 to 4400 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head. This engine is paired with a 7-speed wet dual-clutch transmission. The country has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, the significance of vehicle width data in the national standard is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.

Was this review help?
12
0
Share
StCalvin
09/16/25 8:25am

I've been researching the technical specifications of the Volkswagen CC recently. The car length is approximately 4.86 meters or 4860 mm, which is quite suitable for a mid-size coupe. The body length directly affects driving stability, reducing shaking at high speeds for a smoother ride. It also relates to the turning radius, which might pose some parking challenges in the city, especially in tight spaces, but getting used to the parking sensors helps. The interior space is really decent, with a long wheelbase providing ample rear legroom—comfortable for three adults without feeling cramped. The 563-liter trunk capacity is perfect for travel luggage. Compared to similar class vehicles, it's slightly longer than the BMW 3 Series, offering more practicality without being bulky. The design features low, sleek lines for excellent visual appeal, and maintenance is standard with oil change intervals similar to regular sedans. Overall, if you value a balance between sportiness and everyday functionality, this size is ideal.

Was this review help?
14
5
Share
Expand All
SanElias
10/31/25 2:12am

As an ordinary owner of a Volkswagen CC, I can say the 4.86-meter length is quite convenient in daily use. After driving for over a year, I initially needed a few more reverses when parking in tight spots, but got the hang of it with time; using mirrors and cameras makes it easier. The car handles turns nimbly in the city without being hard to control; on long trips, the longer body provides stable and comfortable driving with minimal bumpiness. Friends sitting in the back report ample space without feeling cramped; the trunk easily handles luggage for trips. U-turns in narrow alleys sometimes require finding a larger intersection, but otherwise no major issues. Fuel consumption stays around 8L, which is average, and maintenance costs are moderate without extra burdens. I recommend test-driving thoroughly to get familiar with the dimensions when choosing a car—it helps new owners adapt faster. Overall, the size is reasonable, reliable, and practical.

Was this review help?
13
2
Share
Expand All
LeJames
12/14/25 2:20am

I think the design aesthetics of the Volkswagen CC are excellent, with its 4860mm length creating smooth and sporty overall lines. As someone who appreciates exterior styling, this length gives it a coupe-like feel—the low roofline paired with the long body appears elegant without being bulky. It’s even sleeker than the Audi A4, turning heads effortlessly. The interior space benefits greatly, offering ample room for both front and rear passengers, avoiding the cramped feeling of smaller cars. However, parking requires careful spot selection to avoid scrapes. The design’s length also enhances practicality, with a spacious trunk ideal for family trips. On the road, it delivers strong visual impact without sacrificing handling. Color choices like blue or silver further accentuate its dimensional advantages. Overall, this size is perfect for those seeking both style and functionality, adding extra points to its visual appeal.

Was this review help?
6
2
Share
Expand All
More Forum Discussions

How Often Should the Automotive Lubrication System Be Cleaned?

Under normal circumstances, it is recommended to perform a cleaning every 15,000 to 20,000 kilometers driven. For engines that have been using mineral oil or semi-synthetic oil for a long time, the cleaning interval should be appropriately shortened. If full synthetic oil has been used consistently, the cleaning interval can be extended to 20,000 to 25,000 kilometers, as full synthetic oil has strong self-cleaning capabilities. Recommendation: Lubrication system cleaning is best performed during an oil change. After cleaning, an oil protectant can be added to more effectively extend the service life of vehicle components and enhance engine power. Engine cleaning oil is commonly used for lubrication system cleaning. It is a maintenance product designed to remove harmful substances such as sludge, carbon deposits, and gum from inside the engine, keeping the engine internals clean, improving oil flow, reducing wear, and extending engine life. Typically, the old oil is drained first, then the cleaning oil is added, and the engine is idled for several minutes before the cleaning oil is drained completely. Finally, new oil is added, and any residual cleaning oil can mix with the new oil. Some believe that engine cleaning oil only serves a 'healthcare' role, acting as a nice-to-have addition. Others argue that it can effectively remove some oil sludge and has a certain effect on clearing carbon deposits.
5
3
Share

How many years can a car normally last?

A car can theoretically last for 20 years. Nowadays, the car scrappage policy has abolished the 15-year scrappage limit, replacing it with a guided scrappage at 600,000 kilometers. If a car is driven 20,000 kilometers annually, it can last for 30 years; if driven 30,000 kilometers annually, it can last for 20 years. How many years can a private car generally last? The above are just theoretical scenarios. The actual lifespan of a car is influenced by many practical factors. Firstly, during the use of a car, its components will gradually age with usage frequency, and its performance will decline over time. Starting from the 15th year of use, the car must undergo two annual inspections per year; from the 21st year, the number of inspections even increases to four. If the car fails the annual inspection due to component aging and performance degradation, it will need to be scrapped. Additionally, with increasingly strict environmental policies, emission requirements for cars are becoming higher. If an older car's emission standards do not meet policy requirements, it will be labeled as a yellow-label vehicle, prohibiting it from driving in urban areas, thus leading to scrappage. Furthermore, when a car reaches a certain age, as its performance declines, the cost of repairs and maintenance will increase significantly. Moreover, insurance premiums must be paid annually, and if there were many insurance claims in the previous year, the next year's premium will increase even more. If the cost of repairing the car exceeds its value, it would be more economical to buy a new car instead.
11
3
Share

What Causes Battery Cell Failure?

The so-called battery cell failure condition actually refers to the disconnection of the internal plate connection bridge, which prevents the car battery from functioning normally (insufficient voltage). Immediate action is required in such cases, as the impact on the entire vehicle can be significant. So, what exactly causes battery cell failure, and how can it be repaired? 1. Battery cell failure is often caused by poor battery quality. After all, the battery as a power distribution device heavily depends on manufacturing processes, so extra caution is needed when selecting one. 2. Improper usage methods are another major cause, including prolonged deep discharge conditions and using high-power car appliances, both of which can lead to battery cell failure. (Deep discharge: When the vehicle is turned off, the car's internal equipment continues to operate, causing the battery to continuously drain power.) 3. The battery suffers severe impact or falls, causing internal plates to disconnect. For repairing battery cell failure, the first step is to extract the problematic single cell, then replace it with a new plate and seal it with adhesive. Finally, weld the terminal posts, add electrolyte, and charge the battery to complete the repair. Overall, repairing battery cell failure is neither too simple nor too difficult, so it's worth attempting. However, for beginners, it's best to have it handled by professionals at an auto repair shop.
8
3
Share

Disadvantages of Sedans and Hatchbacks?

Hatchbacks have the advantage of shorter length, making them easier to park, but they have smaller trunk space, though more flexible in space utilization, and usually generate more interior noise. Sedans are longer, slightly more inconvenient to park, offer larger trunk space that can isolate odors from the trunk, but have less flexibility in space changes and better interior noise control. If you are a family of two or three, rarely carry a full load of five people, often drive in urban areas, frequently need to transport goods, or require squeezing into tight parking spots, and mostly take short trips with fewer people, then a hatchback is suitable. If you are a family of four or five, often travel fully loaded, or use the car for business purposes, frequently drive on highways, and mostly take long trips with more people, then a sedan is the better choice. Given that these usage scenarios are more common among Chinese drivers, it's no surprise that sedans are preferred. The hatchback's trunk is well-connected to the cabin, making it easier to transport large items. For example, when going on a family outing and needing to carry bicycles or strollers, the rear seats of a hatchback can be folded down. If you try to fit a bicycle into a sedan's trunk, you might as well call a welder to cut your beloved car—just kidding, of course you shouldn't do that. You could have the welder make a mounting rack to attach the bike, but in some cities, traffic police are quite diligent, and you might end up with a ticket. This way, your outing could be marred by bicycle-related issues. In reality, apart from aesthetic preferences, the main differences between hatchbacks and sedans lie in practicality, and the choice should be based entirely on your personal needs.
1
4
Share

Which Toyota Models Have Three-Cylinder Engines?

As of June 4, 2020, Toyota does not have any cars equipped with three-cylinder engines. However, the upcoming Corolla L is expected to feature a three-cylinder turbocharged engine, though it has not yet been released to the market. Toyota is a Japanese automobile manufacturer, and the Corolla is one of its compact family sedans. The current Corolla models do not use three-cylinder engines. Instead, they are equipped with two types of engines: a 1.2-liter turbocharged four-cylinder engine and a 1.8-liter naturally aspirated four-cylinder engine. The variant with the 1.8-liter naturally aspirated four-cylinder engine is a hybrid model. The 1.2-liter turbocharged engine in the Corolla delivers 116 horsepower and a maximum torque of 185 Nm. This engine reaches its peak power at 5,200 to 5,600 rpm and its maximum torque at 1,500 to 4,000 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with a CVT transmission. The 1.8-liter naturally aspirated engine in the Corolla produces 98 horsepower and a maximum torque of 142 Nm, with peak torque achieved at 3,600 rpm and peak power at 5,200 rpm. This engine employs multi-point fuel injection technology and also uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power output of 53 kW and a maximum torque of 163 Nm.
8
0
Share

What is the function of a flange?

The function of a flange is to connect components and pipelines. A flange is a component used to connect shafts or pipes at their ends. It is also used on the inlets and outlets of equipment to connect two devices, such as a reducer flange. When pumps and valves are connected to pipelines, the corresponding parts of these devices are also made into flange shapes, known as flange connections. Any connecting component that uses bolts around the perimeter of two planes to achieve a sealed connection is generally referred to as a "flange," such as the connection of ventilation ducts. These types of components can be called "flange-type components." Due to their excellent overall performance, flanges are widely used in basic engineering projects such as chemical industry, construction, water supply, drainage, petroleum, light and heavy industries, refrigeration, sanitation, plumbing, firefighting, power generation, aerospace, and shipbuilding. A flange (Flange) is also known as a flange plate or a raised-edge plate. A flange is a component that connects pipes to each other, attached at the pipe ends. A flange connection or flange joint refers to a detachable connection that consists of a flange, gasket, and bolts combined as a set of sealing structures. Pipeline flanges refer to the flanges used in pipeline installations, while those on equipment refer to the inlet and outlet flanges of the equipment. Flanges have bolt holes that allow two flanges to be tightly fastened together. A gasket is used between the flanges for sealing. Flanges can be categorized into threaded (screwed) flanges, welded flanges, and clamped flanges.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.