What is the length of the Odyssey?

2 Answers
MacAlessandra
07/24/25 5:33am
The length of the Odyssey is 4847 mm. The Odyssey is an MPV produced by GAC Honda, with body dimensions of 4847mm in length, 1820mm in width, and 1702mm in height, and a wheelbase of 2900mm. The Odyssey is equipped with a CVT continuously variable transmission across all models, and features front-wheel drive. In terms of suspension, the Odyssey has a MacPherson strut front suspension and a torsion beam rear suspension. The Odyssey comes with a satellite navigation system, an 8-inch large display screen, and voice guidance functionality, powered by a high-performance 2.4L i-VTEC engine with variable valve timing and lift. The air intakes on both sides below the front bumper of the Odyssey also adopt a new design, offering a more striking visual effect, and the headlight covers are changed to a light blue color, highlighting the identity of the hybrid model.
Was this review help?
6
5
Share
DelLilah
08/11/25 1:16am
The Odyssey, as a representative family MPV, has a body length of approximately 5 meters, more precisely between 195 and 199 inches, which converts to just over 5 meters in the metric system. I find this size quite reasonable; the third-row seating offers ample space, ensuring children don’t feel cramped, and there’s enough room for luggage during family trips, making it particularly advantageous for family outings. However, parking requires extra attention, especially in underground garages of older shopping malls, where it’s easy to scrape against pillars or walls. It’s advisable to find a larger parking spot or install a rearview camera for assistance. At 5 meters, it’s slightly longer than the Elysion, but Honda’s design ensures nimble handling with a relatively small turning radius, making it easy to drive daily. The spacious interior is a natural advantage, but if your parking space is narrow, it’s wise to measure the dimensions carefully before purchasing.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Can a Valve Exhaust System Pass the Annual Inspection?

Whether a modified valve exhaust system can pass the annual inspection depends on the specific circumstances. If the modification does not alter the vehicle's parameters, it can pass the inspection; however, if it changes the vehicle's parameters, it will not pass. Modifications such as altering the intake and exhaust systems, widening the body, lowering the chassis, changing braking components, or blindly upgrading high-beam headlights, which affect the vehicle's technical parameters, will fail the annual inspection. Annual Inspection Considerations: During the annual inspection, the vehicle management office will check the vehicle's lighting. If the vehicle's lights are found to be too dim or too bright, it will be deemed unqualified and will not pass the inspection. If the lights are too dim, check the wiring and bulbs for aging and replace the necessary components if required. If xenon headlights have been installed, it is recommended to revert to the original headlights before the inspection to ensure compliance.
13
0
Share

What Causes Severe Shaking When Shifting Gears in an Automatic Transmission?

Severe shaking of the vehicle body when shifting gears in an automatic transmission is due to the gear oil in the transmission being too viscous and dense, causing the drivetrain to receive the engine's power more noticeably, thus resulting in a noticeable shake of the car. This situation requires prompt attention. Possible reasons for the gear oil becoming viscous: The gear oil may have been contaminated with various impurities and metal shavings inside the gearbox during operation; some of the light oil components in the gear oil may have naturally evaporated during use; or the properties of the gear oil may have changed due to deterioration after its expiration date. Corresponding solutions: If the issue is contamination with impurities, timely cleaning is sufficient; if it's due to the natural evaporation of light oil, timely addition of light oil is needed; if the gear oil has expired, it should be replaced promptly. Key points for shifting gears in an automatic transmission: When shifting between gears other than D and S, first press the brake, then move the gear lever to the desired gear, and finally release the brake to complete the gear shift.
5
2
Share

Which engine is used in the Geely Boyue?

The Boyue is equipped with 1.5T and 1.8T turbocharged engines. Below are the detailed specifications of the Geely Boyue: 1. In terms of power, this vehicle offers two powertrain options, featuring 1.5T and 1.8T turbocharged engines respectively. The 1.5T engine delivers a maximum power of 130kW and a peak torque of 255Nm, while the 1.8T engine produces a maximum power of 135kW and a peak torque of 300Nm. 2. Regarding the transmission system, the 1.5T model is paired with a 6-speed automatic manual transmission, and the 1.8T model is matched with a 7-speed dual-clutch transmission. The engines in the Geely Boyue are manufactured by Geely Auto and incorporate Volvo's technology. The 1.5T turbocharged engine is a three-cylinder unit, while the 1.8T turbocharged engine is a four-cylinder unit. 3. The engines utilize integrated turbochargers, BOSCH direct gasoline injection, silent chain drive, DVVT continuous variable valve timing technology, and dual-balance shaft design, among other technologies. These features enhance the engine's performance and improve fuel efficiency to a certain extent.
6
5
Share

How to Reset the Maintenance Reminder for the Outlander?

To reset the maintenance light for the Outlander, follow these steps: Turn the ignition switch to the "OFF" position. Repeatedly press the indicator selection button located at the lower right of the instrument panel until the information display switches to the maintenance cycle reminder. Then, press and hold the indicator selection button for more than 5 seconds to complete the maintenance light reset. Below is some relevant information about the Outlander: 1. The Outlander is a five-door SUV, but it differs from other Mitsubishi SUVs because it is the first SUV produced by Mitsubishi using a sedan chassis, based on the platform of the Mitsubishi Lancer sedan. It combines the comfort of a sedan with the characteristics of an SUV, offering good off-road capability and the spaciousness and versatility of an MPV. 2. In terms of exterior design, the Outlander features a robust front end, with an inverted triangular bulge on the engine hood extending down to the top of the bumper. The front air intake is split into two sections, and the lower part of the body slightly protrudes outward. 3. The interior is designed with seats positioned higher than those in a sedan, providing strong support and reducing fatigue. The steering wheel adopts the popular four-spoke design and is adjustable for height. 4. In terms of power, the Outlander is equipped with a 2.4-liter Mitsubishi 4G64S4M 16-valve multi-point fuel injection gasoline engine.
7
1
Share

What Does It Mean When the Illumination Distance of Vehicle Lights Changes from Near to Far at Night?

When the illumination distance of vehicle lights changes from near to far at night, it indicates that the vehicle may have entered a downhill slope, or transitioned from a curved road to a straight road. It could also mean the slope has changed from a gentle downhill to a steep downhill, or the vehicle is moving from a downhill slope onto a flat road. Precautions for Nighttime Driving: Reduce speed. Visibility at night is not as good as during the day, so drive slowly and maintain an appropriate speed. Use high and low beams correctly. Use low beams during normal driving to avoid inconveniencing oncoming vehicles. Switch to high beams when turning or going uphill to signal the presence of your vehicle to others. Maintain a safe distance from the vehicle ahead. Poor visibility and slower reaction times at night increase the risk of rear-end collisions if following too closely, so keep an appropriate distance. Use the horn when necessary. Be alert for pedestrians crossing the road at night and use the horn or flash lights to warn them in advance. Avoid unnecessary overtaking. Overtaking at night should be done cautiously, ensuring sufficient straight-line distance and avoiding curves. Before overtaking, approach the vehicle ahead and use light signals to indicate your intention to pass, waiting for them to yield before accelerating.
6
1
Share

What is the actual measured ground clearance of the Tiggo 8?

The ground clearance of the Tiggo 8 is 200mm. The correct term for chassis height should be minimum ground clearance, which refers to the distance between the lowest point of the car's chassis and the ground when the car is at its maximum load capacity. The passability of a car is largely reflected in the data of the minimum ground clearance. In previous standards, there were regulations for the minimum ground clearance, which usually had to be between 150mm and 160mm. The chassis height (minimum ground clearance) of family cars is usually in the range of 110mm to 150mm. For family cars, if the chassis height exceeds 130mm, the car can more easily pass through various complex road surfaces, but the high-speed stability is poorer. The smaller the ground clearance (below 110mm), the better the stability of the car at high speeds, but the passability is worse. Methods to increase car ground clearance: If you need to increase the ground clearance of the car, you can add spacers at a car modification shop. For better results, you can also replace the shock absorber. Impact of car ground clearance: The larger the ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded and stationary, used to characterize the car's ability to pass over obstacles such as stones and tree stumps without collision.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.