What is the length of the ninth-generation Accord?

1 Answers
DiSara
07/29/25 11:10am
The length of the ninth-generation Accord is 4915mm. Here is an introduction to the ninth-generation Accord: 1. In terms of body dimensions, the ninth-generation Honda Accord measures 4915*1845*1470mm in length, width, and height, with a wheelbase of 2775mm. 2. The ninth-generation Honda Accord is a mid-size car launched by GAC Honda. The design of the car's exterior and interior is very much in line with Chinese consumers' aesthetic views on automobiles. Compared to the previous generation, the car's configuration and power have been upgraded. 3. Compared to the overseas version, the ninth-generation Accord underwent a series of localized modifications after domestication, with many differences from the overseas version. The most significant change is the chrome trim on the front face of the car.
Was this review help?
18
4
Share
More Forum Discussions

What is the difference between Audi S series and RS?

Audi S series and RS series have the following differences: 1. Different models: Audi S stands for Sport, representing the performance version of the Audi family; the RS series is fully designed, developed, and manufactured by Audi's quattro department and is not produced on the same line as regular Audi models. 2. Different engines: Audi S is equipped with a 2.9T turbocharged engine; the RS is equipped with a 2.5T inline five-cylinder engine. Here is some related information about Audi: 1. Audi is a luxury car brand under Audi AG, a subsidiary of the German Volkswagen Group. 2. Its logo consists of four interlocking rings. 3. The headquarters is located in Ingolstadt, Germany, and it has branches in many countries, including China.
6
4
Share

How Long is the Service Life of an MT Transmission?

MT transmission has a service life of approximately 16,000 kilometers. The actual lifespan largely depends on the level of maintenance. An MT transmission, commonly referred to as a manual transmission, is widely used, with the most common types being 5-speed manual and 6-speed manual transmissions. Here are the specific details about MT transmissions: 1. The MT transmission is the most common type of transmission in vehicles, requiring manual shifting of the gear lever to change gears; 2. The advantages of manual transmissions are straightforward and robust, notably their traditional efficiency, which is higher than that of automatic transmissions; 3. They are relatively inexpensive, making them a cost-effective option, provided that the driver has the necessary skill.
19
1
Share

What does eco mean in a car?

Eco in a car refers to the economic driving mode. The following is a detailed introduction to driving modes: 1. Eco mode: In this mode, the car's fuel injection volume and transmission control module are managed by the computer, which adjusts to the most fuel-efficient driving method. This mode offers the lowest fuel consumption but also the least power. Additionally, since the transmission control module is managed by the computer, the throttle response is less sensitive, and the engine does not react as quickly. 2. Comfort mode: Also known as standard mode, it balances power and fuel efficiency. In this mode, power output and air conditioning settings are optimized for energy saving, making it most suitable for everyday driving. 3. Sport mode: This mode is generally used in road conditions requiring higher power. When switched to this mode, the battery's energy output increases significantly in a short time, and the traction and stability control systems reduce their intervention in driving operations. This results in quicker car response and more noticeable steering operations. This mode has the highest fuel consumption but also the most power. 4. Snow mode: This mode primarily reduces wheel slippage and spinning when driving on snow by suppressing the car's torque.
1
1
Share

Are Brake Fluid and Power Steering Fluid Interchangeable?

Automotive brake fluid and power steering fluid are not interchangeable. The reasons are: brake fluid does not have the lubricating effect of power steering fluid and cannot effectively protect gear components and bearings. Power steering fluid is a medium liquid used in the car's power steering pump. Through hydraulic action, it makes the steering wheel lighter when the driver turns, thereby reducing the driver's steering effort. Brake fluid is a liquid medium that transmits braking pressure in the hydraulic braking system, used in vehicles with hydraulic braking systems. Its characteristics are: 1. Low freezing point: it maintains good fluidity at low temperatures; 2. Extremely high boiling point: it does not produce vapor lock at high temperatures; 3. Minimal quality changes: it does not corrode or soften metals and rubber.
14
2
Share

What are the differences between drum brakes and disc brakes?

The differences between drum brakes and disc brakes are: 1. Different principles: Drum brakes use hydraulic pressure to push pistons, causing the brake shoes to press against the inner wall of the wheel to achieve braking; Disc brakes use a hydraulic pump to push the brake caliper, applying force to the brake pads to achieve braking. 2. Different components: Drum brakes consist of a brake backing plate, brake wheel cylinder, and brake shoes; Disc brakes are hydraulically controlled, with main components including the brake disc, wheel cylinder, brake caliper, and oil pipe. Conditions for replacing drum brakes: 1. If brakes are used frequently, consider replacing drum brakes after the vehicle has traveled 80,000 kilometers; 2. If brakes are not used frequently, consider replacing drum brakes after the vehicle has traveled 100,000 kilometers; 3. If a squeaking sound is heard when using the brakes, immediately go to a maintenance center to check the brake system and replace the drum brakes.
18
2
Share

Can a car be driven on the highway during the break-in period?

During the break-in period, a car can be driven on the highway, but it is necessary to control the speed and the engine's RPM. The speed can be increased to 120 km/h, but the RPM should not exceed 3000. The break-in period for a car is typically considered to be the first 3 months or 3000 to 5000 kilometers. This period refers to the initial driving distance after a new car leaves the factory, allowing the engine components to wear in smoothly. The first maintenance cycle for a car is usually around 5000 kilometers. Methods for using a car during the break-in period include: 1. Correctly adjusting the ignition and fuel supply systems; 2. Changing gears promptly; 3. Not removing the speed limiter prematurely; 4. Using gasoline from reputable gas stations and high-quality engine oil; 5. Avoiding excessive loads and long-distance trips; 6. Preheating the engine before starting; 7. Avoiding emergency braking.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.