What is the length of the Envision?

What is the mnemonic for the Stage 3 Lighting Simulation Test?

When encountering oncoming traffic or following a vehicle with streetlights, and when driving straight through well-lit intersections, remember these rules. High beams are only permitted in two situations: when road illumination is insufficient as a mandatory requirement. The alternating use of high and low beams may seem frequent, but actually boils down to two scenarios: first when overtaking (flashing high-low beams), and second when passing through special road sections. There are three additional special situations where hazard warning lights must be activated first: when dealing with vehicle failure, when parking with parking lights, and when adding fog lights during foggy conditions. Important Notes: 1. Pre-start preparation: Before starting, fasten your seatbelt and check if the seat position and mirrors are properly adjusted according to your needs. These seemingly minor details are easily overlooked but can lead to test failure. 2. Preventing stalling at startup: When starting, slowly release the clutch to avoid improper coordination between throttle and clutch that may cause stalling. Gradually release the clutch while gently pressing the accelerator to match the vehicle speed.

13

3

Share

What is the reason for the prompt to change the engine oil as soon as possible?

The reasons for the prompt to change the engine oil are: 1. The engine oil is insufficient and needs to be changed. 2. Insufficient engine oil volume reduces the oil pump's output or causes the pump to fail to draw oil due to air intake, leading to a drop in oil pressure. 3. Another possible reason is the improper selection of engine oil. If the wrong type or grade is used, the engine may experience increased leakage due to the oil's low viscosity during operation, thereby reducing oil pressure. Below is related information: 1. Engine oil serves functions such as lubrication and friction reduction, auxiliary cooling, sealing to prevent leaks, rust and corrosion prevention, and shock absorption, all of which protect the engine. 2. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. 3. The main functions of engine oil are to reduce friction and wear on moving parts and to remove sludge (one function of dispersants) and varnish (function of detergents) from the engine.

6

1

Share

Do the two fans in front of the Nissan X-Trail engine rotate simultaneously?

The two fans in front of the Nissan X-Trail engine rotate simultaneously. Introduction to the fans in front of the engine: The fans in front of the engine are part of the car's cooling system. Working principle: Driven by the water pump, the coolant enters the radiator located at the front of the car. The fan at the front operates, drawing cold air from outside into the engine compartment, which blows directly onto the radiator. The hot coolant inside the radiator transfers its heat to the air, thereby lowering its own temperature. It is then pumped by the water pump to start the next cycle. Through this continuous cycle of the coolant, the engine's heat is effectively controlled. This is the principle of the car's cooling system. Currently, most civilian vehicles use electronically controlled fans, where the operation of the fans is managed by the electronic system. When the temperature sensor detects that the coolant reaches a certain temperature, it sends a command to the fans, causing them to start operating. Once the coolant temperature drops to a certain level, the system sends a command to stop the fans.

14

3

Share

What is the fuel consumption of the Audi A3 1.8T?

Audi A3's comprehensive fuel consumption is generally around 7 liters per 100 kilometers. Audi A3's Exterior: In terms of appearance, the A3 inherits the style of the new generation of Audi products, reshaping the front design with a shield-shaped emblem and using lighting clusters to provide a more dynamic style, making the A3 look very confident. The lines of the tailgate are also more rounded and simple, showcasing a balance between aerodynamics and aesthetic design, while also providing better headroom. Audi A3's Powertrain: The A3 offers a variety of engine configurations, including 1.9L TDI, 2.0L TDI, 1.6L inline-four, 2.0L FSI, and 3.2L V6 engines. To maximize the performance of the A3 3.2, the manufacturer not only equipped it with Audi's proud quattro all-wheel-drive system but also installed the DSG dual-clutch automatic transmission, typically found in top-performance vehicles, providing extremely smooth and fast gear shifts for perfect power delivery in the A3.

1

5

Share

Is it okay to shift gears without fully depressing the clutch?

No, this is an incorrect operation method. Shifting gears without fully depressing the clutch will produce significant abnormal noises and accelerate the wear of the clutch disc. Here are some relevant details: 1. When shifting gears: Depressing the clutch during gear shifting is necessary to disconnect the engine flywheel from the clutch disc. During gear shifting and starting, there is a significant speed difference between the engine flywheel and the clutch disc. Therefore, the semi-engaged clutch (half-clutch) technique is used when starting to gradually synchronize the speed of the clutch disc with that of the engine flywheel. 2. When downshifting: When downshifting, you can tap the accelerator with your right foot. This prevents the car from experiencing significant jerking after engaging the clutch, a technique known as rev-matching or throttle blipping. With some practice, you can master the rev-matching technique. If there is noticeable jerking after completing the gear shift and engaging the clutch, it indicates a significant speed difference between the engine flywheel and the clutch disc. Such jerking can cause some damage to the transmission and drivetrain.

14

1

Share

Who is at fault when the car in front suddenly stops and a rear-end collision occurs?

Responsibility lies with the following vehicle, as the rear-end collision was caused by the following vehicle failing to maintain a safe distance for emergency braking measures, making the tailing vehicle fully liable. Here is additional information: 1. Road Safety Law: Article 80 of the Road Safety Law stipulates that when a motor vehicle is driving on a highway at a speed exceeding 100 kilometers per hour, it should maintain a distance of more than 100 meters from the vehicle in front in the same lane. When the speed is below 100 kilometers per hour, the distance from the vehicle in front in the same lane can be appropriately reduced, but the minimum distance should not be less than 50 meters. 2. Alerting the following vehicle. An important driving technique to effectively prevent rear-end collisions is to alert the following vehicle: First, frequently check the following vehicle. If it seems too close, lightly tap the brakes to alert it. Second, if the traffic ahead is dense and moving slowly, turn on the hazard lights to remind the following vehicle to slow down.

15

0

Share

What is the length of the Envision?

What is the mnemonic for the Stage 3 Lighting Simulation Test?

What is the reason for the prompt to change the engine oil as soon as possible?

Do the two fans in front of the Nissan X-Trail engine rotate simultaneously?

What is the fuel consumption of the Audi A3 1.8T?

Is it okay to shift gears without fully depressing the clutch?

Who is at fault when the car in front suddenly stops and a rear-end collision occurs?

Why does the steering wheel vibrate when driving on the highway?

How Does the Insurance Company Compensate If the Car Is Scrapped?

What is an R-class driver's license?

How to Cancel a Driver's License Exam File?