What is the length of the BMW 5 Series?

1 Answers
VanGrant
07/29/25 11:17am
The length of the 2020 BMW 5 Series 525Li is 5087mm. Dimensions of the 2020 5 Series 525Li: Length × Width × Height: 5087mm × 1868mm × 1500mm, with a wheelbase of 3108mm. Dimensions of the 2020 5 Series 525Li M: Length × Width × Height: 5087mm × 1868mm × 1500mm, with a wheelbase of 3108mm. Dimensions of the 2020 5 Series 530Li Leading Edition: Length × Width × Height: 5087mm × 1868mm × 1500mm, with a wheelbase of 3108mm. The wheelbase determines the interior space of a car, and as a sedan, the overall space structure of the BMW 5 Series is very satisfying.
Was this review help?
4
1
Share
More Forum Discussions

What are the differences between imported cars and domestically produced cars?

Differences between domestically produced cars and imported cars: 1. Differences in workmanship: Domestic cars are not necessarily inferior to imported ones in terms of workmanship. 2. Differences in configuration: Some cars retain only the same appearance and interior when produced domestically. 3. Price differences: Imported cars are subject to high taxes, which also makes the same model more expensive when imported than when produced domestically. Here are ways to distinguish between imported and domestically produced cars: 1. Some car models from certain brands are not domestically produced, such as the Mercedes-Benz S-Class, BMW 7 Series, and Audi A8. 2. For the same model, check the rear of the car—those with Chinese characters are domestically produced, while those with English are imported. 3. Check the vehicle identification number (VIN), which is a 17-digit code. Any car that does not start with the letter 'L' is an imported car.
8
5
Share

How to Adjust the Time on CRV?

Steps to adjust the time on Honda CRV are as follows: 1. Press the vehicle's one-touch start button to power on the vehicle. 2. Press the menu toggle button on the left side of the multifunction steering wheel to bring up the time adjustment function. 3. Use the res and set buttons on the right side of the multifunction steering wheel to adjust the time display. 4. Press the enter button on the left side of the multifunction steering wheel to confirm the time settings. Introduction to Honda CRV: 1. Body dimensions: The length, width, and height are 4550mm, 1820mm, and 1685mm respectively, with a wheelbase of 2620mm. 2. Safety features: Equipped with SRS dual airbags, door beams, front and rear 3-point ELR seat belts, seat belt reminders, and a seat safety system with pre-tensioners and load limiters.
6
1
Share

What is the Golf two-door version?

The Golf two-door version comes in two models: one is the Golf GTI two-door version, and the other is the Golf R convertible version. The Golf GTI is equipped with a 2.0-liter turbocharged engine, codenamed EA888, with a maximum power of 162 kilowatts, a maximum torque of 350 Newton-meters, a maximum power speed range of 4500 to 6200 revolutions per minute, and a maximum torque speed range of 1500 to 4400 revolutions per minute. The Golf uses the full-spec EA888 engine, with this 2.0T engine delivering a maximum power of 213 kilowatts, a maximum torque of 380 Newton-meters, a maximum power speed range of 5400 to 6500 revolutions per minute, and a maximum torque speed range of 1800 to 5300 revolutions per minute, paired with a 7-speed dual-clutch transmission.
15
1
Share

Where to Find the Changan Engine Number Stamping?

Changan engine number stamping is located under the front passenger seat. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed through the following 4 ways: The vehicle license displays the engine number, usually located in the second last line; The motor vehicle registration certificate records the engine number; The car purchase invoice records the engine number; The vehicle purchase tax payment certificate records the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be identical. The engine number refers to the production serial number of the engine, where each engine can only use one unique engine number and no two engines share the same number.
20
5
Share

What Causes Front Wheel Noise When Turning a Car?

The reasons for front wheel noise when turning a car are as follows: 1. Severe wear on the front tires, requiring replacement by the owner. 2. Damage to the steering gear or lack of lubrication; the owner needs to apply some grease to the steering gear bearings. 3. Presence of foreign objects on the ground causing friction with the tires during stationary turning. Relevant information about tires is as follows: 1. Always check the production date when purchasing tires: Do not buy tires with old production dates. Being rubber products, tires age even when not in use. 2. Regularly check tire pressure and surface for damage during daily use: The tire sidewalls are relatively fragile; if they are cut or punctured, they cannot be repaired. It is recommended to replace tires every four years, even if the mileage is low during that period.
17
3
Share

What is the warranty period for the Golf's dry dual-clutch transmission?

The warranty period for the Golf's dry dual-clutch transmission is 3 years or 100,000 kilometers. The advantages of this transmission include reduced fuel loss, rapid gear shifting due to the operation of two independent clutches, minimizing intermediate fuel consumption losses, and ensuring uninterrupted power output from the engine during gear shifts. The Golf is a compact car under the Volkswagen brand, equipped with two engines: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine. The 1.2-liter turbocharged engine delivers a maximum power of 85 kW and a maximum torque of 200 Nm, with the maximum power achieved at 5,000 to 6,000 rpm and the maximum torque at 2,000 to 3,500 rpm. The 1.4-liter turbocharged engine boasts a maximum power of 150 horsepower and a maximum torque of 250 Nm, with the maximum power achieved at 5,000 to 6,000 rpm and the maximum torque at 1,750 to 3,000 rpm.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.