What is the length of the Audi Q5?

Will Uneven Tires Cause Wheel Noise?

Tire unevenness can cause wheel noise, which may indicate an issue with the wheel bearings, leading to instability and unusual sounds. In such cases, a four-wheel alignment is required. If the tires make unusual noises while driving, and the sound intensifies with increased speed, it is likely due to abnormal tire bearings. Immediate inspection and replacement at a repair shop are necessary to prevent further damage to the axle or vehicle body. If the tires produce a noise resembling running over foreign objects while driving, accompanied by steering wheel vibration, it is likely caused by uneven tire tread. Immediate tire replacement is essential to avoid further wear and potential loss of control. Unusual noises occurring during acceleration, deceleration, or when starting and stopping the vehicle, along with body sway and difficulty in handling, may be due to loose bolts. Immediate tightening is recommended. It is advisable to visit a specialized repair shop to inspect the bolts and bolt holes for integrity. If any damage is found, prompt replacement is necessary.

115

Share

Can a tire with a small chunk of rubber missing be used normally?

Tire sidewall with a small chunk missing can generally continue to be used as long as the inner cord layer is not exposed and only the rubber is damaged. If the damage is very small and shallow, it may be ignored. However, if the damage is deep, it is advisable to replace the tire for safety. Introduction to Tubeless Tires: Tubeless tires, also known as "low-pressure tires" or "pneumatic tires," have high elasticity and wear resistance, along with good adhesion and heat dissipation performance. Particularly, all-steel radial tubeless tires are economical and durable. Applications of Tubeless Tires: In recent years, tubeless tires have been increasingly used in bicycles, motorcycles, cars, buses, and trucks.

107

Share

Where is the tire serial number located?

Serial numbers are located on both sides of the outer tire, indicating production numbers, manufacturer trademarks, size specifications, ply rating, maximum load and corresponding pressure, Chinese pinyin codes for tire cord fabric, installation requirements, and directional markings. Most tire model markings appear as 215/70R15. Meaning of the numbers: 215 represents the tire section width in millimeters, typically ranging from 145 to 285mm in 10mm intervals. 70 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width. Tires, generally made of wear-resistant rubber materials, come in solid and pneumatic types, with pneumatic tires consisting of inner and outer tires. Manufacturers usually set the tire lifespan at 3 years. If a vehicle drives 20,000 kilometers annually, replacement may be considered after 2 to 3 years. How to distinguish tire speed ratings: 91W on the tire represents the load index and speed rating, where W is the speed rating. The speed rating indicates the maximum speed a tire can achieve under specified load and pressure conditions on a flat road, with W's maximum speed being 270 km/h. 91 is the load index, representing the maximum load capacity under specified conditions.

117

Share

How to Check the Tire Pressure Monitoring on the Mazda3 Axela?

The method to check the tire pressure monitoring on the Mazda3 Axela is as follows: When the system detects abnormal pressure in one or more tires, the tire pressure indicator light on the instrument cluster will illuminate. On vehicles equipped with a driver information center, a message prompting to check the tire pressure will appear. The Mazda3 Axela is a compact car with body dimensions of 4662mm in length, 1797mm in width, 1445mm in height, and a wheelbase of 2726mm. It is powered by a 1.5L naturally aspirated engine, delivering a maximum power of 86kW at 6100rpm and a maximum torque of 148Nm, paired with a 6-speed manual transmission.

106

Share

What Causes Wheel Lock-Up?

Wheel lock-up refers to the sudden locking of wheels when braking, causing the vehicle to lose steering capability. This typically occurs in vehicles without ABS (Anti-lock Braking System) and is primarily caused by excessive braking force applied by the brake pads to the disc or drum. Phenomenon of wheel lock-up: In cars without ABS, if the brake pedal is pressed hard while driving, the wheel speed rapidly decreases. When the braking force exceeds the friction between the wheels and the road, the wheels lock up. Fully locked wheels increase the friction between the tires and the road, potentially leading to skidding and loss of directional control under high inertia. If the front wheels lock up, the driver loses control over the vehicle's direction. If the rear wheels lock up, skidding is more likely to occur. Solutions to wheel lock-up: ABS is designed to prevent wheel lock-up during braking. In ABS-equipped vehicles, when encountering an emergency, the system continuously monitors the speed of each wheel through speed sensors installed on the wheels or drive shafts. It compares this data with the ideal slip ratio and adjusts the braking pressure accordingly. The controller commands the regulator to reduce the hydraulic pressure in the wheel's brake cylinder, decreasing the braking torque. After a certain period, the original hydraulic pressure is restored. This cycle repeats continuously, ensuring the wheels remain rotating while maintaining maximum braking torque. Thus, ABS keeps the wheels in a slightly slipping rolling state during braking, achieving optimal braking performance.

120

Share

Can a scratched tire without exposed cords be used on highways?

A scratched tire without exposed cords should not be used on highways. If the sidewall of a car tire is cut or damaged, it is best to replace it promptly, as driving at high speeds can easily lead to a tire blowout, posing a significant safety hazard. Reasons why a scratched tire should not be used on highways: The weakest part of a tire is its sidewall. Damage to this area not only increases the risk of a blowout but also makes repairs more difficult, so the tire should be replaced as soon as possible. Solutions for a scratched tire: If the cords are not exposed, it means the structural integrity of the sidewall has not been compromised, and the tire can still be used. However, for safety reasons, it is best to take it to a tire repair shop to patch the damaged area and rebalance the tire, then install it on the rear axle or use it as a spare. The sidewall is the most vulnerable part of the tire, and the rubber here protects the inner cord layers. If it is damaged again, the cords may be compromised, which is extremely dangerous.

114

Share

What is the length of the Audi Q5?

Will Uneven Tires Cause Wheel Noise?

Can a tire with a small chunk of rubber missing be used normally?

Where is the tire serial number located?

How to Check the Tire Pressure Monitoring on the Mazda3 Axela?

What Causes Wheel Lock-Up?

Can a scratched tire without exposed cords be used on highways?

What's the difference between R18 and R19 tires?

What is the function of tire care products?

What does HP on tires mean?

Is it normal for the water temperature to show two bars when starting the car in summer?