What is the length of the Audi A8L wiper blades?

2 Answers
LaEdward
07/28/25 2:34pm
The lengths of the Audi A8L wiper blades are 27cm and 21cm respectively. More information about car wiper blades is as follows: 1. Wiper blades are tools installed on the front windshield of motor vehicles to simply clean rainwater and other debris that may obstruct vision. 2. The key to the effective functioning of wiper blades lies in the rubber wiper strips maintaining sufficient moisture. Only with adequate moisture can they possess excellent flexibility to ensure tight contact with the windshield. 3. The power source of wiper blades comes from the motor, which is the core of the entire wiper system. Generally, there is a wiper control knob on the car's combination switch handle, featuring three settings: low speed, high speed, and intermittent mode.
Was this review help?
1
0
Share
RhettFitz
08/11/25 10:35pm
I remember when I bought my new Audi A8L, the wiper blade size was a point to pay attention to. Generally, the driver-side main wiper of the A8L is about 26 inches, and the passenger-side wiper is about 18 inches, but there may be slight variations depending on the model year or configuration. For example, my 2019 model has a measured size of 26 inches for the main wiper and 18 inches for the secondary wiper. When replacing them, it's crucial to match the correct size; otherwise, it may result in poor wiping performance or noise that distracts driving. I check the rubber condition of my wiper blades every six months, especially in rainy regions where the rubber tends to crack. The replacement process is simple and takes about 5 minutes, but incorrect sizing can cause windshield scratches or blind spots. I recommend keeping the manual data or checking online parts websites by entering your vehicle model for precise information. In daily use, the length of the wiper blades directly affects driving safety in the rain—clear visibility reduces accident risks, so don't overlook this detail. Developing a regular maintenance habit extends wiper lifespan and makes driving more hassle-free.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

How to reset the tire pressure monitoring system on a Mercedes-Benz R400?

After the tire pressure indicator light comes on, you must ensure the vehicle is parked safely by the roadside and first check the tire pressure monitoring function on the navigation screen for any wheel abnormalities. If the alarm is triggered due to excessively high tire pressure, we can slightly increase the tire pressure to reach the safe value. If the display shows excessively low tire pressure, you need to reset the system and drive the car for a while. The tire pressure warning will then be eliminated, resolving the issue.
1
3
Share

What to Do When the Truck Rolls After Applying the Handbrake?

If the truck continues to roll, it indicates that the handbrake is not tightened properly or there is an issue with the handbrake. This usually means the handbrake cable is faulty, often due to misalignment or deformation of the handbrake shoe bracket. If you forget to apply the handbrake when parking normally and the vehicle starts to roll backward, pressing the foot brake firmly may prevent significant danger. Whenever the vehicle is stuck on a slope and starts to roll backward, the first thing the driver should do is stay calm and avoid panic, then quickly press the foot brake.
7
0
Share

What to Do When the Brake Malfunction Light Comes On?

The solutions for when the brake malfunction light comes on are: 1. Check for poor contact or damage in the wiring and connectors; 2. Inspect the installation gap, positioning, and contamination of the wheel speed sensor and toothed ring; 3. Avoid high-speed driving and sudden braking; 4. Adjust the wheel bearing clearance to the normal value. The reasons for the brake malfunction light coming on are: 1. When the vehicle speed exceeds 10 km/h, the speed signal is not transmitted to the ABS control unit; 2. When the vehicle speed exceeds 40 km/h, the speed signal exceeds the tolerance value; 3. There is a recognizable open circuit or short circuit to the positive or ground in the sensor.
6
0
Share

How to Conduct Annual Inspection for New Vehicles?

The owner of a motor vehicle may apply for the inspection compliance mark at the vehicle registration authority up to three months before the expiration of the current inspection validity period. When applying, the vehicle owner should fill out the application form and submit the vehicle registration certificate and the compulsory traffic accident liability insurance certificate. The vehicle registration authority shall, within one day from the date of acceptance, verify the motor vehicle, review the submitted documents and certificates, and issue the inspection compliance mark. For small non-commercial passenger vehicles with 6 seats or fewer within 6 years of registration, an exemption from on-site inspection is implemented. Owners can directly apply for the inspection compliance mark at the traffic police department or vehicle registration authority.
10
1
Share

What does mass production of cars mean?

Mass production of cars refers to small-scale production. Here are the relevant details: 1. Limited production: For example, some special models have a small market demand and are produced in limited quantities for specific consumer groups. 2. Reasons: New models launched in the market may start with small-scale production due to capacity constraints. For instance, producing a supercar involves small demand, most processes requiring manual labor, long production cycles, and special materials, hence only small-scale production is feasible. Alternatively, newly introduced models may initially have low automation levels, uneven employee skills, low production efficiency, and limited capacity, thus starting with small-scale production. However, once processes and employee skills improve, large-scale production can begin.
6
1
Share

How to Replace the Battery in a Buick Remote?

Turn the car remote key to the back, and you can see that the back cover is divided into two parts. On the side where the key ring is visible, the battery is located under the back cover. First, insert a flat-head screwdriver into the gap and gently push upwards to partially open the back cover. Then, move the screwdriver along the gap towards both sides. Use your hand to move the back cover in the closing direction, and you can remove the back cover to see the inside of the battery. A protruding clip can be seen on one side of the battery.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.