What is the length of the Audi A6?

3 Answers
MayaRose
07/29/25 8:06pm
The length of the Audi A6 is 5035mm, with a width and height of 1855mm and 1485mm respectively, and a wheelbase of 2945mm. The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon variants. The standard Audi A6 features front-wheel drive, with a five-link independent front suspension and a trapezoidal-link independent rear suspension. This model is equipped with a 2.0T engine codenamed EA888, delivering a maximum power of 180 horsepower and a peak torque of 320 Nm. It is paired with a CVT continuously variable transmission and comes with features such as electronic parking and paddle shifters.
Was this review help?
12
0
Share
LeIsla
08/14/25 4:13pm
I've just studied the dimensions of the Audi A6. The standard version is approximately 4.94 meters long, which is about 4940 mm. This size is quite reasonably designed, ensuring both driving stability and daily practicality. You might need to find a slightly larger parking space in the city, but it handles quite nimbly. The sense of stability brought by its length during highway cruising is a highlight. There are slight variations between different versions, like the Avant wagon being slightly longer, possibly approaching 5 meters, which increases trunk space. I recommend considering this length when purchasing, measuring it against your garage or common parking scenarios. After all, extra length requires more caution when turning in tight spaces.
Was this review help?
5
3
Share
Expand All
McIsabela
08/14/25 4:14pm
When choosing a car, I carefully checked the specifications of the Audi A6. It's about 4.94 meters long, which is quite suitable for family trips, with ample rear legroom so it doesn’t feel cramped when traveling with kids. However, parking can be a bit tricky, especially in tight mall parking spaces where you might need to adjust a few times. The wagon version is slightly longer, just over 5 meters, making it even more convenient for loading luggage. Daily driving isn’t too challenging thanks to the assistance systems, but I’d recommend measuring your parking space before buying to avoid any inconvenience.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What is the normal intake pressure for Peugeot 307?

The normal intake pressure range for Peugeot 307 is between 40-80KPA. Intake pressure refers to the average absolute pressure in front of the intake valve during the engine cylinder's intake process. The intake pressure sensor, abbreviated as MAP (Manifold Absolute Pressure Sensor), is connected to the intake manifold via a vacuum tube. It senses the vacuum changes in the intake manifold as the engine's speed and load vary, then converts the internal resistance changes of the sensor into voltage signals for the ECU to adjust fuel injection and ignition timing. The main parameters of the intake pipe affecting engine intake performance are summarized as follows: intake pipe inlet diameter, intake manifold diameter, intake manifold length, and plenum chamber volume. Intake pipe inlet diameter: Determines the total intake volume and is set based on the throttle diameter. Intake manifold diameter: Determines the intake volume per cylinder and is set based on the intake port entrance diameter. Intake manifold length: Affects the dynamic effect. In intake pipe optimization calculations, this is treated as a target parameter for optimization. Plenum chamber volume: Affects the pulsation (resonance) effect. An appropriate plenum chamber volume not only enhances charging efficiency by utilizing the pulsation effect but also maintains a relatively stable pressure environment in the plenum chamber, providing favorable conditions for leveraging dynamic effects while eliminating interference between cylinders and improving intake uniformity.
18
3
Share

Where is the tow hook on the Changan CS55?

The installation position of the tow hook on the Changan CS55 is under the vehicle's bumper. The tow hook, also known as a car tow hitch, is used for towing purposes and serves as the vehicle's towing and traction device. It consists of an installation bracket, a ball-type tow hook, and a towing power module. How to use the tow hook: Locate the towing hitch positions at the rear of the towing vehicle and the front of the towed vehicle; after removing the cover on the bumper, assemble the included hitch; install the towing tool; the towing vehicle should start in 1st gear to ensure sufficient torque for adequate traction. Installation method for the car tow hook: Use a screwdriver to gently pry open the small square module and remove the cover; screw the tow hook clockwise onto the small module until it can no longer turn, indicating successful installation. Towing precautions: If the towed vehicle has brake issues or towing is required on icy roads, a tow bar should be prioritized; ensure the tow hook is securely fastened and properly installed, double-checking its stability before towing; plan the route carefully; choose a towing route with less traffic, better road conditions, and a shorter distance; avoid hazardous sections such as crowded areas, logistics centers, commercial districts, underground parking lots, etc., to reduce the risk of secondary accidents.
13
2
Share

Is Honda Engine the Best in the World?

Honda engine is the best in the world. Here is an introduction to Honda engines: Since Honda was founded in 1948, Honda's engine technology has indeed been at the forefront of the global engine field, covering 1.5L, 1.8L, 1.0T, 1.5T, 2.0L displacements, among others. The most classic is the 1.5L engine, which can produce 131 horsepower. The most famous engine technology is the "VTEC system" (Variable Valve Timing and Lift Electronic Control System). The "Earth Dreams" technology configuration includes: VTEC variable valve lift, variable intake manifold, VCM variable cylinder management, turbocharging, and more, earning countless praises. Consumers often joke that it's "buying an engine and getting a car for free."
15
2
Share

How to Install One-Key Start for Motorcycles?

First, check the constant power. With the mechanical key in the off position, locate the wire in the original ignition switch that has power, then directly connect it to the constant power wire of the one-key start system. Turn the mechanical key to the NO position, ensuring the entire vehicle is powered on. The wire in the original ignition switch without power is the starter motor wire, which should be connected to the one-key start system.
17
4
Share

Is the Focus Dual Clutch Really That Bad?

Ford Focus dual-clutch transmissions have a relatively high failure rate. Introduction to the Focus: The Focus is a Ford A-segment family sedan. It is equipped with an inline four-cylinder Duratec-HE reverse-mounted aluminum alloy engine, which is cast entirely from aluminum alloy and features a reverse-mounted design. The maximum power output is 104 kW, and the maximum torque is 180 N·m. Introduction to the Focus Dual Clutch: The Focus dual-clutch transmission is sourced from Germany's Getrag. It is a dry dual-clutch transmission that is prone to overheating during frequent gear shifts. The prolonged semi-engaged state in stop-and-go traffic can lead to risks of overheating, jerking, and oil leakage.
13
3
Share

Which is more durable, the Tiguan L or the CR-V?

CR-V is more durable. Power: The CR-V is equipped with a 1.5T engine, delivering a maximum power of 193 horsepower and a maximum torque of 243 Nm, paired with a CVT transmission. The Tiguan L is equipped with a 2.0T engine, delivering a maximum power of 186 horsepower and a maximum torque of 320 Nm. Body Dimensions: The latest top-trim Tiguan L measures 4716(mm) in length, 1859(mm) in width, and 1677(mm) in height, with a wheelbase of 2791(mm). The latest top-trim Honda CR-V measures 4621(mm) in length, 1855(mm) in width, and 1689(mm) in height, with a wheelbase of 2660(mm).
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.