What is the length of the Audi A4 in meters?

Can 95 Octane and 92 Octane Gasoline Be Mixed?

95 octane and 92 octane gasoline should not be mixed. Long-term mixing of different octane ratings can affect the lifespan of the car's ignition system, fuel injectors, and spark plugs. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum, used as fuel, and appears as a transparent liquid. 95 octane gasoline consists of 95% isooctane and 5% n-heptane, while 92 octane gasoline consists of 92% isooctane and 8% n-heptane. The main difference between the two lies in the purity of isooctane—the higher the purity of isooctane, the stronger the gasoline's anti-knock performance.

7

5

Share

How to Adjust the Clock on a Peugeot 508?

To adjust the clock on a Peugeot 508, press the setup button on the center console, then select display settings and proceed to adjust the clock. Taking the 2021 Peugeot 508 as an example, it is a mid-size sedan with the following dimensions: length 4870mm, width 1855mm, height 1455mm, wheelbase 2848mm, and a curb weight of 1490kg. The 2021 Peugeot 508 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is powered by a 1.6L turbocharged engine, delivering a maximum horsepower of 170PS, maximum power of 125kW, and maximum torque of 250Nm, paired with a 6-speed automatic transmission.

6

0

Share

How to adjust the time on the Bestune X40?

The method to adjust the time on the Bestune X40 is: locate the adjustment knob at the front of the wiper and press and hold it to set the specific time. Taking the 2019 Bestune X40 as an example, its body dimensions are: length 4310mm, width 1780mm, height 1680mm, with a wheelbase of 2600mm, fuel tank capacity of 50 liters, trunk capacity of 375 liters, and a curb weight of 1325kg. The 2019 Bestune X40 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 114 PS, maximum power of 84 kW, and maximum torque of 115 Nm.

4

5

Share

How to Turn Off the Automatic Headlights on the Honda Vezel?

The method to turn off the automatic headlights on the Honda Vezel is: there is an 'auto' mark on the light switch, turn it to 'off' to disable the automatic headlights. Taking the 2020 Honda Vezel as an example, it is a compact SUV with body dimensions of: length 4328mm, width 1772mm, height 1605mm, wheelbase 2610mm, fuel tank capacity 50l, and body weight 1227kg. The 2020 Honda Vezel features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131ps, maximum torque of 155nm, maximum power of 96kw, paired with a 6-speed manual transmission.

16

4

Share

What does increased driving resistance mean?

The driving resistance of a car includes four parts: the rolling resistance between the tires and the ground, air resistance, gradient resistance, and acceleration resistance. In other words, these are the factors that affect the speed of the car while driving. Increased friction affects the engine's power output, causing excessive pressure. The related introduction is as follows: 1. Gradient resistance: When a car travels at a constant speed on a horizontal road, it must overcome the rolling resistance from the ground and the air resistance from the atmosphere. When the car travels uphill on a slope, it must also overcome the component of gravity along the slope, which is called gradient resistance. When the car accelerates, it also needs to overcome acceleration resistance. Rolling resistance and air resistance exist under any driving conditions, while gradient resistance and acceleration resistance only exist under certain driving conditions. There is no gradient resistance or acceleration resistance when driving at a constant speed on a horizontal road. 2. Rolling resistance: When the wheels roll, the contact area between the tires and the road surface generates normal and tangential interaction forces, as well as corresponding deformation of the tires and the supporting road surface. The relative stiffness of the tires and the supporting surface determines the characteristics of the deformation. When elastic tires roll on hard road surfaces (concrete roads, asphalt roads), the deformation of the tires is the main factor. At this time, due to the internal friction of the tires, elastic hysteresis loss occurs, and the work done to deform the tires cannot be fully recovered. It is this elastic hysteresis loss of the tires that causes rolling resistance.

8

0

Share

What is the aspect ratio?

Aspect ratio refers to the ratio of the height from the rim to the tread surface to the measured width of the tire's cross-section, expressed as a percentage, meaning the height as a percentage of the width. The functions of tires are: 1. Transmit driving force, braking force, and steering force to achieve vehicle operation; 2. Support vehicle load; 3. Reduce and absorb vibrations and impacts during driving, avoiding severe vibrations that could damage vehicle components. Tire maintenance methods include: 1. Regularly clean stones stuck in tire treads; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Periodically inspect front wheel alignment; 6. Adopt careful driving habits, choose road surfaces wisely, avoid objects that could puncture or scratch tires, and steer clear of chemical spills that may corrode tires.

2

3

Share

What is the length of the Audi A4 in meters?

Can 95 Octane and 92 Octane Gasoline Be Mixed?

How to Adjust the Clock on a Peugeot 508?

How to adjust the time on the Bestune X40?

How to Turn Off the Automatic Headlights on the Honda Vezel?

What does increased driving resistance mean?

What is the aspect ratio?

What Are the Principles of Vehicle Maintenance?

What is the Travel Mode of Car Lights?

What is the BMW i3?

Why is there a noise when turning the steering wheel?