···
Log in / Register

What is the length of a semi-trailer?

3 Answers
OEthan
09/02/25 7:45am
Box-type semi-trailers come in size specifications of 9.5 meters, 10.5 meters, 11 meters, 11.5 meters, 12.5 meters, 12 meters, and 13 meters. Below are the maintenance methods for semi-trailers: 1. Body waxing and glaze sealing: The acidic components in rainwater can strongly corrode the car's paint. 2. Chassis rust-proofing and paint removal: The chassis is close to the ground and prone to corrosion, so it is essential to pay attention to cleaning and rust-proofing the vehicle's chassis. 3. Trailer disinfection: Cleaning the interior of the vehicle during the rainy season can prevent various bacteria from harming the human body. 4. Timely circuit inspection: During the rainy season, the vehicle's electrical system should be checked frequently to avoid leakage faults.
Was this review help?
17
1
Share
BeauLynn
09/15/25 2:57am
I've been driving big trucks for over 20 years. The length of semi-trailers usually ranges between 13 to 16 meters, depending on local regulations. For example, the maximum length in China's standards is about 13.75 meters, while in some parts of Europe it's shorter, just over 12 meters. Longer trucks have larger turning radii, making them prone to accidents in narrow streets or curves. I remember once almost scraping a roadside post while parking in the city. New drivers need to be extra careful as length affects handling stability. When choosing a truck, balance cargo capacity with road conditions - safety comes first, otherwise the fines for exceeding limits can be severe.
Was this review help?
8
1
Share
Expand All
StAdalynn
10/29/25 3:36am
From a traffic regulation perspective, semi-trailer length varies by country: the US permits 53 feet (~16 meters), China caps at 13.75 meters, while Europe has shorter limits around 12.2 meters. These restrictions are based on road safety and stability considerations to prevent loss of control during turns or at high speeds. Excessive length increases blind spots and rollover risks; regulations aim to protect all road users. Practically, I recommend checking local laws rather than relying solely on average figures.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

How many points are deducted for racing on the highway?

Points deducted for racing on the highway are determined based on speed. Details of speeding: If the vehicle speed exceeds the limit by less than 10%, the driver will be given a warning; if the vehicle speed exceeds the road speed limit by more than 10% but less than 20%, a fine will be imposed and 3 points will be deducted from the driver's license; if the speed exceeds the road speed limit by more than 20% but less than 50%, a fine will be imposed and 6 points will be deducted from the driver's license; if the speed exceeds the limit by more than 50%, 12 points will be deducted from the driver's license, and a fine for the violation will be imposed. Legal provisions: Article 22 of the Amendment (VIII) to the Criminal Law of the People's Republic of China adds an article after Article 133 as Article 133-1: Whoever drives a motor vehicle on the road to chase and race, if the circumstances are flagrant, or drives a motor vehicle on the road while intoxicated, shall be sentenced to criminal detention and also be fined.
14
3
Share

Why is the BMW 6 Series GT Unpopular?

This is determined by its model positioning. The BMW 6 Series GT is a large luxury coupe with higher performance and configurations than ordinary BMW sedans, demanding more in terms of sporty handling and coming with a higher price tag. Its target audience in China is inherently small, and coupled with the need for "import," it naturally doesn't attract many buyers. Below is a detailed introduction to the BMW 6 Series GT: 1. Body Dimensions: The BMW 6 Series GT has a body length of 5103mm, and its wheelbase matches the standard wheelbase version of the 7 Series at 3070mm, so there's no need to worry about the spaciousness inside the car. Despite its fastback design, the use of an inward concave design ensures that rear headroom isn't compromised. 2. Space: The trunk offers a massive and flat luggage space of 610L, easily accommodating four or five 24-inch suitcases, with an additional lower layer design. Such a large trunk space means no issues even for a family traveling for over half a month, embodying the essence of Gran-Turismo. Of course, if needed, folding down the rear seats with one click can expand the trunk capacity by three times—exceeding 1800L, roughly enough to fit a mattress.
10
5
Share

What lines will result in penalty points if driven over?

Driving over white solid lines, single yellow solid lines, or double yellow solid lines will result in penalty points. White solid lines: White solid lines are most commonly found at intersections. When approaching the stop line at an intersection, the lane dividers change from white dashed lines to white solid lines. The length of white solid lines varies; some intersections have long white solid lines that start far from the intersection, while others have short ones that only appear close to the intersection. Therefore, lane selection must be completed before entering the solid line area, preferably with some distance to spare. Otherwise, if there is heavy traffic and you cannot change lanes in time, you may end up driving over the line. Single yellow solid lines or double yellow solid lines: Yellow solid lines generally separate lanes going in opposite directions and should not be crossed. Drivers making U-turns or left turns often end up crossing these lines. On roads where U-turns or left turns are permitted, the solid lines will change to dashed lines or have a gap, indicating where such maneuvers are allowed. If the lines remain solid without any gaps or changes to dashed lines, U-turns and left turns are prohibited. Performing these maneuvers would involve crossing the yellow solid lines, which is a traffic violation.
13
5
Share

What Causes High Water Temperature in a Four-Cylinder Engine?

High temperature in a four-cylinder diesel engine is related to coolant, cooling capacity, and engine load. Impact of Coolant Flow: Typically, insufficient fluid volume, especially insufficient coolant, reduces the heat dissipation effect of the equipment, leading to overheating of the diesel engine. For high temperatures caused by this situation, as long as regular inspections are carried out during daily use, the insufficient fluid can be replenished in time. Impact of Cooling Capacity on Water Temperature: Too much scale deposited in the radiator, cylinder, and cylinder head water jacket reduces the heat dissipation function of the cooling water. Moreover, excessive scale in the water jacket also reduces the cross-section of the circulation pipeline, decreasing the amount of water participating in the cooling circulation, thereby reducing the ability to absorb heat from the cylinder block and cylinder head, resulting in excessively high cooling water temperature. If the radiator capacity is too small or the cooling area is insufficient, it affects the cooling effect, causing high water temperature. To prevent this situation, regular inspections should be performed during daily use to promptly detect any abnormalities and carry out repairs or replacements. Impact of Engine Load on Water Temperature: Prolonged operation under overload conditions can lead to increased fuel consumption, higher internal heat generation, and boiling of the cooling water. The best way to deal with this situation is to avoid prolonged overload operation.
4
1
Share

Is it acceptable for the front of the car to exceed the white line in a parking space?

It is not considered a violation if the front of the car slightly exceeds the white line in a parking space. However, if the protruding part affects road traffic, traffic police may impose corresponding penalties. Parking spaces are designed based on certain vehicle dimensions, but there are no regulations specifying that only vehicles of corresponding sizes can park there. Therefore, for longer vehicles, it is acceptable if the car slightly exceeds the front or rear of the parking space, as long as it does not obstruct road traffic. Parking spaces are categorized into two types based on size: Large parking spaces: 15.6 meters in length and 3.25 meters in width, suitable for medium and large vehicles. Small parking spaces: 6 meters in length and 2.5 meters in width, suitable for small vehicles. Parking spaces are also classified into three types based on arrangement: Parallel parking spaces: Standard length of 6 meters and width of 2.5 meters. Angled parking spaces (with angles of 30°, 45°, or 60°): Diagonal length of 6 meters, width of 2.8 meters, with a vertical distance between the two angled lines maintained at 2.5 meters. Perpendicular parking spaces: Length of at least 5 meters (typically set at 6 meters) and width of 2.5 meters, with 2.5x5.3 meters being the optimal standard size. Large vehicle parking spaces should not use angled or perpendicular arrangements.
8
2
Share

Why Do You Need to Pull the Handbrake for 3 Seconds When Starting on a Slope?

Starting on a slope requires pulling the handbrake for 3 seconds because, on steeper slopes or with heavier vehicles, the car may roll backward if the brake is not engaged. If you use your foot to brake, you won't have a foot free to press the accelerator, and releasing the clutch without sufficient power will cause the engine to stall. In such cases, pulling the handbrake is necessary for safety and simplicity of operation. Starting on a slope refers to the process of starting a car on an inclined surface, which is a fundamental skill every new driver must master. The technique involves releasing the clutch while keeping the handbrake engaged, waiting for the engine to vibrate before releasing the handbrake, and then gently pressing the accelerator to allow the car to start smoothly. This method prevents the car from rolling backward. While this procedure may seem cumbersome to experienced drivers, it is particularly suitable for beginners. Correct Method for Starting on a Slope with an Automatic Transmission: When parking, press the brake and engage the handbrake. Upon starting the vehicle, release the brake, press the accelerator, and then disengage the handbrake. This method effectively prevents the car from rolling backward due to brake interruption. Alternatively, use one foot for the brake and the other for the accelerator. When starting on a slope, press the accelerator first, and once the car shows a tendency to move forward or the engine RPM reaches a certain level, release the brake.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.