···
Log in / Register

What is the latest time to arrive for the 8 AM Subject 3 driving test?

4 Answers
KylieMarie
07/29/25 5:22pm

There is no strict regulation on the latest time to arrive for the Subject 3 driving test. If you are only a few minutes late, a lenient examiner may still allow you to proceed with the test. If you are significantly late and can provide official proof, you may try to apply for the final batch of the test or a retake. If the application is not approved, it will be treated as a failure, and you will have to wait for 10 days before rescheduling the test. More relevant information is as follows: 1. Test Attempts: The Subject 3 test allows only 5 attempts in total. If you fail the first attempt, you will be given one free retake opportunity on the spot. If you still fail the retake, the test will be terminated. If you fail the fifth attempt, all previously passed subjects will be invalidated, and you will need to reapply for the driver's license, starting from Subject 1 again. 2. Reasons for Not Taking the Test: If you are certain that you cannot attend the test due to personal reasons, you must cancel the appointment at least one day in advance to avoid being marked as a failure and wasting a test attempt. You can cancel the appointment through the Traffic Management 12123 app or the Traffic Safety Comprehensive Service Platform, or visit the Vehicle Management Office if necessary. However, it is important to note that frequent cancellations may affect the success rate of future test appointments, so students should consider carefully before canceling.

Was this review help?
3
4
Share
Max
08/14/25 8:11am

If your driving test (Subject 3) is scheduled at 8 AM, I recommend arriving at the test center by 7:30 AM at the latest. As someone who frequently accompanies students to exams, I know there are procedures like check-in, ID verification, and sometimes waiting in line for the examiner before the test. Arriving by 7:30 AM gives you ample time to handle unexpected situations, such as traffic jams or difficulty finding the location. Being late not only means missing the test but may also require rescheduling, wasting both time and money. Remember to plan your route the day before the exam and ensure your vehicle is in good condition. Stay relaxed mentally; arriving early allows you to take deep breaths and adjust, avoiding nervous mistakes. In short, safe driving starts with punctuality—don’t lose big for small gains.

Was this review help?
16
4
Share
Expand All
JackLee
10/13/25 6:37am

I just passed the third driving test last year. If the test was scheduled at 8:00, I usually arrived by 7:20. This helps avoid rushing, allows time for check-in and familiarization with the environment, and provides a buffer for unexpected situations. Here's a lesson from my experience: Once I arrived at 7:50, but encountered heavy fog and traffic, nearly making me late. The adrenaline rush affected my performance. My advice is to arrive at least 40 minutes early, bring your ID and test admission ticket, and stay focused during the exam. Remember, punctuality is fundamental—don't take risks like I did.

Was this review help?
16
3
Share
Expand All
NevaehLynn
11/26/25 7:36am

When my child is taking the driving test (Subject 3), I always remind him to arrive at the test center early. If the test starts at 8:00, he should leave no later than 7:15 to ensure arrival before 7:30. Before the test, there's a check-in process, and being late might lead to direct disqualification—what a hassle! As a parent, I suggest planning the route in advance and checking the weather; on the test day, have a good breakfast and maintain a calm mindset. These small details can help your child pass smoothly.

Was this review help?
11
2
Share
Expand All
More Forum Discussions

Should You Press the Accelerator When Reversing a Car?

For manual transmission cars, you can lightly press the accelerator, but for automatic transmission cars, it's best not to press the accelerator when reversing. Below are some related points about reversing: Precautions for reversing: Adjust the rearview mirror inside the car properly. Due to differences in height, the rearview mirror needs to be adjusted appropriately to avoid obstructed vision when looking directly backward. Also, pay attention to both side mirrors. When reversing, besides checking the interior rearview mirror, make sure to monitor both side mirrors to prevent the vehicle from hitting other cars or obstacles on either side. Reversing: Refers to the act of moving a motor vehicle backward, or when people "transfer" during a trip, i.e., switching from one vehicle to another. Reversing is generally more challenging than driving forward, mainly because the view is somewhat limited.
7
0
Share

What is the difference between adding engine oil and changing engine oil?

Changing engine oil is to remove internal carbon deposits and sludge. Adding engine oil is to supplement the oil level when it is insufficient to meet the engine's required oil quantity. Below are specific methods for selecting engine oil for cars: 1. Performance selection: If you prioritize long-lasting oil performance, you can choose Mobil engine oil; if you focus on the oil's cleaning effect on the engine, Shell lubricants can be used; for lubricants with strong oil film toughness, Castrol is recommended. 2. Driving conditions: For frequent driving in congested areas, older vehicles, or long-distance heavy-load transportation, the viscosity of the lubricant can be appropriately increased. 3. Engine type: For naturally aspirated engines, mineral oil and semi-synthetic oil can be used. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions, requiring higher-grade lubricants with better fluidity, preferably full synthetic oil.
20
0
Share

What is the battery life of the built-in sensor for tire pressure monitoring?

The service life of the built-in battery for tire pressure monitoring is usually 3-5 years. The following is relevant information about the built-in sensor battery for tire pressure monitoring: Tire pressure monitoring device: The tire pressure monitoring device is a simpler tire pressure monitoring system that utilizes the existing sensing function of ABS to compare the number of rotations of the tires. A tire with insufficient pressure has a shorter circumference, so if one of the four tires has insufficient pressure, the number of rotations during driving will be different from the other tires. Replacement of the built-in battery for tire pressure monitoring: The built-in battery for tire pressure monitoring has a long service life. Replacing the battery is a complicated process, so the sensor module is usually replaced directly. For external sensors, they can be directly disassembled and the battery replaced.
1
1
Share

How to turn on the high and low beams of the new Sylphy?

The method to turn on the high and low beams of the new Sylphy: 1. Turn the ignition switch to the OFF position, and the lights will automatically turn off; 2. Turn it one more position to turn on the parking lights, and rotate another position to turn on the low beams; 3. Push the entire light control lever forward to turn on the high beams, and return it to turn off the high beams. The Sylphy is a compact car under Dongfeng Nissan, with a length, width, and height of 4641 mm, 1815 mm, and 1450 mm respectively, and a wheelbase of 2712 mm. In terms of power, the Sylphy is equipped with a naturally aspirated engine with a maximum horsepower of 135 hp, a maximum torque of 159 Nm, and a maximum power of 99 kW.
8
5
Share

Does the Honda URV comply with China 6 emission standards?

Dongfeng Honda URV complies with China 6 emission standards. Below are the details about Dongfeng Honda URV and China 6 standards: Dongfeng Honda URV: It is a mid-size SUV with body dimensions of 4856mm in length, 1942mm in width, and 1670mm in height. It has a wheelbase of 2820mm, front track of 1652mm, rear track of 1671mm, fuel tank capacity of 57 liters, trunk capacity of 486 liters, and a curb weight of 1745kg. The 2020 Dongfeng Honda URV is equipped with a 1.5T turbocharged engine delivering a maximum horsepower of 193PS, maximum power of 142kW, and maximum torque of 243Nm, paired with a CVT continuously variable transmission. China 6: China 6 generally refers to the National Phase 6 Motor Vehicle Pollutant Emission Standards.
13
3
Share

What is the maximum number of points that can be added or deducted from a driver's license?

Up to 6 points can be added, while a maximum of 12 points can be deducted. Here are the specific details: 1. Regulations: This point addition system is currently only implemented in certain regions, such as Guangzhou, where car owners can report other drivers' traffic violations to add points to their own driver's license. However, it's important to note that each person can only report other drivers' violations a maximum of 5 times per year; the maximum number of points that can be added per person per year is 15, and these points cannot be combined with the 12 points in the scoring cycle. 2. Driver's License: The scoring cycle is 12 points. If all 12 points are deducted, the driver must undergo further training and pass an exam. Currently, the driver's license implements a point addition system, meaning that the scoring cycle for a driver's license is no longer limited to just 12 points.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.