What is the latest time for vehicle annual inspection?

1 Answers
LaCharles
07/29/25 7:38pm
Vehicle annual inspection can be processed on the latest day of the inspection expiration date. Precautions for vehicle annual inspection: 1. Non-operational passenger cars (including non-operational passenger cars, non-operational small and micro passenger vehicles, excluding vans and vehicles with 7 seats or more) are exempt from inspection for 6 years. 2. Operational passenger vehicles must be inspected once a year within 5 years; after 5 years, they must be inspected every 6 months. Procedures for annual inspection: 1. Article 49 of the "Regulations on the Registration of Motor Vehicles" clearly stipulates that the owner of a motor vehicle can apply for an inspection compliance mark at the vehicle management office of the registration place within three months before the expiration of the motor vehicle inspection validity period. 2. Before applying, the owner of the motor vehicle must settle all traffic violations and accidents related to the vehicle. 3. According to Article 47, Paragraph 4 of the "Administrative Measures for Motor Vehicle Registration", vehicles that fail to undergo safety technical inspection within the prescribed period will be given a warning or fined up to 200 yuan by the public security traffic management department, and the annual inspection can only be conducted after paying the fine.
Was this review help?
2
5
Share
More Forum Discussions

How to Determine if a Car's Timing Chain is Stretched?

To determine if a car's timing chain is stretched, you can visit a 4S shop to check by reading the crankshaft sensor and camshaft sensor. If there is an alarm indicating operation delay, it may suggest a potential issue with chain stretching. The timing chain works by connecting the sprockets of components such as the crankshaft and camshaft with high-strength metal chains to maintain synchronized operation. Due to the high-speed movement between metal parts, wear is rapid and temperatures are high, necessitating the design of an appropriate lubrication system for cooling and lubrication. Additionally, the use of timing chains in engine design also presents the issue of friction noise between metal parts, which manufacturers need to address through various measures.
6
3
Share

How to Open the Trunk of a Volkswagen Polo?

Methods to open the trunk lid of a Volkswagen Polo: 1. Using the key: Briefly press the trunk release button on the remote key, and the trunk must be opened within two minutes, otherwise it will automatically lock again; 2. Manual method: Press the upper part of the Volkswagen logo with your thumb to make the lower part of the logo pop out, then grasp the lower part of the logo to open the trunk lid. The Volkswagen Polo has body dimensions of 4053mm in length, 1751mm in width, and 1446mm in height, with a wheelbase of 2564mm. The Volkswagen Polo is equipped with a 1.5L naturally aspirated engine, which is a water-cooled inline four-cylinder four-valve electronically controlled multi-point fuel injection gasoline engine.
2
5
Share

What is the tire size of the Hongqi H5?

The Hongqi H5 comes with two tire options. One is the Hankook Ventus S1 evo2 series tire with a size of 225/45R19, and the other is the Hankook KINERGY EX series tire with a size of 225/55R17. The Hongqi H5 is a new model under the Hongqi brand. The body dimensions of the Hongqi H5 are 4945mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2875mm. It is equipped with a 1.8T engine that delivers a maximum power of 131kW and a maximum torque of 250Nm, paired with a 6AT transmission.
12
4
Share

What causes the engine light to turn yellow after refueling a car?

When the engine light turns yellow after refueling a car, it is usually due to poor fuel quality. The solution is to drain all the poor-quality fuel and replace it with high-quality fuel. After starting the engine for about 30 seconds, the engine fault light will automatically turn off. Engines have specific requirements for fuel quality, especially as regulations and standards for engines become increasingly stringent, leading to higher demands on fuel quality. Fuel quality is the primary factor causing the engine fault light to illuminate. The anti-knock property of gasoline is indicated by its octane rating—the higher the octane number, the better the anti-knock performance. For example, 97-octane gasoline has an octane rating of no less than 97. Leaded gasoline can cause lead poisoning in oxygen sensors. Therefore, poor fuel quality is the main reason for insufficient engine combustion, leading to the illumination of the engine fault light.
17
5
Share

What does it mean when the ESP light comes on in a car?

The illumination of the ESP light in a car indicates that there may be a malfunction in the Electronic Stability Program system. Since ESP is not an independent system, it typically shares sensors with other electronic devices such as ABS and TCS. It could also be caused by damage to other functions. In such cases, it is recommended to send the vehicle to a 4S shop for inspection as soon as possible. ESP, also known as Electronic Stability Program, analyzes the vehicle's driving state information transmitted from various sensors and then sends correction instructions to systems like ABS and EBD to help maintain dynamic balance. ESP can keep the vehicle in optimal stability under various conditions, with more noticeable effects in cases of oversteering or understeering.
12
3
Share

What is the purpose of the N gear in an automatic transmission car?

In automatic transmission vehicles, the N gear is one of the three standard gear positions, located between the R (Reverse) and D (Drive) gears on the gear shift console. Essentially, it serves as the neutral gear in the transmission, disconnecting the power transmission between the input and output shafts of the gearbox. When temporarily stopping for more than twenty or thirty seconds on flat or slightly inclined roads, it is advisable to first engage the handbrake and then shift to N gear. This practice helps reduce driving fatigue caused by prolonged braking with the right foot and prevents sudden vehicle movement due to accidental release of the brake pedal, which could lead to collisions. When restarting from an N gear stop, whether moving forward or backward, only a single gear shift is required, making the process more convenient and less prone to errors.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.