What is the latest news on new energy vehicle subsidies?

1 Answers
MacElena
07/29/25 8:59pm
New energy vehicles are subsidized by the state. However, not all new energy vehicles receive subsidies, as some models do not meet national standards. Here are the relevant details: 1. Range: The latest national subsidy standards for new energy vehicles have been issued. Vehicles with low range will no longer receive subsidies, with the threshold set at 150 kilometers. This means that new energy vehicles with a range below 150 kilometers are not eligible for subsidies. The subsidy standards are divided into five tiers based on range, from 150 kilometers to 400 kilometers, with different subsidy amounts for each tier. 2. Battery pack energy density and energy consumption level: If the energy density is below 105Wh/kg, no subsidy will be granted. The higher the energy density, the higher the subsidy.
Was this review help?
10
5
Share
More Forum Discussions

When Should Vehicle Tires Be Replaced?

Generally, household vehicles should have their tires replaced after traveling 60,000-80,000 kilometers or every 3-5 years. Here are some considerations regarding tire replacement: 1. Replacement timing depends on circumstances: For drivers with good driving habits, tires typically need replacement every 3-5 years or after 60,000-80,000 kilometers. In more severe road conditions, such as frequent driving on gravel roads or situations involving constant traffic jams, sudden braking, and sharp turns, the replacement interval will be shorter. 2. Tire aging time: The main material of tires is rubber, which undergoes natural aging. This primarily manifests as the tires hardening and the sidewalls developing small cracks. The natural aging period is generally 4-5 years. Tires used for 5 years should be replaced promptly to prevent the risk of blowouts. 3. Observe tire wear: If the tires are severely worn and the tread pattern is level with the wear indicators, the tires need to be replaced. Otherwise, braking on wet or slippery roads will be more difficult, and the vehicle is highly prone to losing control. Additionally, driving on excessively rough roads increases the risk of tire blowouts.
1
3
Share

Where is the production plant of Shanghai Volkswagen located?

Shanghai Volkswagen currently has two main production bases. The headquarters is located in Shanghai Anting International Automobile City, covering an area of 3.33 million square meters. The newly established Shanghai Volkswagen Nanjing Branch is located in Jiangning Economic and Technological Development Zone, Nanjing City, covering an area of 635,000 square meters. Additional Information: 1. Changchun: Changchun is the headquarters of FAW, with some automotive enterprises being central state-owned enterprises. In 1956, FAW Changchun produced China's first Jiefang brand truck. Subsequently, the first Dongfeng brand sedan and Hongqi luxury car were put into production. After decades of development, FAW Changchun has become one of China's largest automobile manufacturers and can also rank among the world's top 500 companies. 2. Beijing: The headquarters of BAIC Group is located in Beijing, with a very comprehensive departmental setup. Moreover, this automotive enterprise is one of the most complete automobile manufacturers in China. 3. Shanghai: The headquarters of SAIC Motor is located in Shanghai. SAIC owns numerous brands, among which SAIC Volkswagen Iveco is a well-known automotive brand. SAIC's vehicle sales also hold a leading position in China's automobile market, consistently ranking at the forefront.
13
0
Share

Where is the water filling mark for the Ford Mondeo radiator?

Ford Mondeo's radiator is located at the upper part of the radiator, and you can add water by unscrewing the radiator cap. Additional information: 1. Car radiator generally refers to the heat sink: The radiator is part of the car's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, the outlet chamber, the main plate, and the radiator core. The upper water tank is on the radiator, connected to the lower water tank via pipes. Hot water flows from the upper to the lower tank and turns into warm water. The cooling air fins form channels, and through the suction of the fan and the relative wind speed when the car moves forward, a large amount of cold air passes through the air channels, absorbing the heat from the cooling water flowing through the pipes and then dissipating it into the atmosphere. 2. The radiator is an important component of a water-cooled engine: As a key part of the cooling circuit in a water-cooled engine, it absorbs heat from the cylinder block to prevent engine overheating. Due to water's high specific heat capacity, the temperature does not rise significantly after absorbing the cylinder block's heat. Therefore, the engine's heat is transferred through the cooling water liquid circuit, using water as a heat carrier to conduct heat, and then dissipates via large-area cooling fins through convection to maintain the engine's optimal operating temperature.
19
5
Share

What are the physical examination items required for applying for a driver's license?

The physical examination items for learning to drive as stipulated in Article 11 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" include: 1. Height: Applicants for large passenger vehicles, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. Applicants for medium-sized passenger vehicles must be at least 150 cm tall. This is the first step in the physical examination for learning to drive. 2. Vision: Applicants for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. Applicants for other vehicle types must have uncorrected or corrected visual acuity of at least 4.9 on the logarithmic visual acuity chart. 3. Color vision: No red-green color blindness. This is consistent with the vision requirements in the physical examination for learning to drive. 4. Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork. 5. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions. 6. Lower limbs: Normal movement function. Applicants for driving manual transmission vehicles must have a lower limb length difference of no more than 5 cm. Applicants for driving automatic transmission vehicles must have a sound right lower limb. 7. Trunk and neck: No movement dysfunction.
8
0
Share

Can You Drive with 110 Tire Pressure?

Tire pressure of 110kpa is not safe for driving. Excessively low tire pressure can cause severe deformation of the tire sidewall, damage the cord layer, and lead to a tire blowout. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and tendencies to veer, posing risks to driving safety; Increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; Reduces the functionality of the cords and rubber, leading to delamination or cord breakage, excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may cause a blowout; Increases tire body deformation, making the tire side prone to cracks, while generating flexing motion, leading to excessive heat, accelerating rubber aging, cord layer fatigue, cord breakage, and increasing the tire's contact area with the ground, speeding up shoulder wear. Solutions for insufficient tire pressure: If no damage is visible, simply inflate to normal pressure and reset the tire pressure system; If a puncture is found during inspection, promptly drive to a tire shop for repair, then reinflate; If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage from rim deformation. It's advisable to inspect and replace the rim.
4
3
Share

Can a vehicle still be registered if the temporary license plate has expired?

Yes, but the vehicle cannot be driven on the road before obtaining the new license plate. If caught by traffic police while driving, it will be treated as an unlicensed vehicle, which may result in the inability to transfer ownership later. Generally, when purchasing a new car, it is necessary to register the new license plate for the vehicle at the same time, which is equivalent to obtaining the vehicle's identification card, and only then is it allowed to drive on the road. Before obtaining the official license plate, if there is a need to drive on the road, a temporary license plate can also be applied for. There are actually many special types of license plates for motor vehicles, and temporary license plates are one of them. In addition, there are military license plates, armed police license plates, etc. License plates with the word "Embassy" are diplomatic license plates, and such vehicles enjoy diplomatic privileges. The use of temporary license plates is time-limited and regional. Those who meet any of the following conditions can apply for a temporary license plate at the local vehicle management office: 1. When driving back from the place of purchase to the place of use, a temporary license plate must be applied for at the vehicle management office in the place of purchase; 2. When transferring the vehicle's registration and the official license plate has been surrendered, a temporary license plate must be applied for at the local vehicle management office to drive back to the local area; 3. For new vehicles in the local area that have not yet obtained an official license plate but need to be driven to another location for modification, a temporary license plate must be applied for locally. After the modification is completed, a temporary license plate must be applied for at the modification location to drive back to the original area; 4. When purchasing a vehicle locally and needing to drive to another location, a temporary license plate must be applied for locally to drive to the other location; the same applies in reverse. 5. When the vehicle's registration has not yet been fixed and temporary use is required.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.