What is the largest vehicle a C1 driver's license can drive?

1 Answers
OLila
07/29/25 10:07pm
C1 driver's license can drive small passenger vehicles with 9 seats or less (including 9 seats); light and small trucks with a total mass of 4,500 kg or less (including 4,500 kg), a vehicle length of 6 meters or less (including 6 meters), and an approved load capacity of 1,500 kg or less (including 1,500 kg). Permitted vehicle types for C1 license: The driving scope of a C1 driver's license includes small and mini passenger vehicles, as well as light and mini cargo vehicles; light, small, and mini special-purpose vehicles; small passenger vehicles with a seating capacity of 9 people or less. Vehicles that a C1 driver's license cannot drive: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license cannot drive vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
Was this review help?
2
0
Share
More Forum Discussions

Why Does Brake Fluid Decrease in Cars?

There are two main phenomena that cause brake fluid to decrease. First, brake pad wear leads to brake fluid replenishing the pipelines, resulting in a drop in fluid level. Second, there may be leaks in the brake fluid pipelines, so timely inspection and repair are recommended. Below is a detailed introduction to brake fluid: 1. Automotive brake fluid is the liquid used in hydraulic braking systems. It must not undergo chemical reactions, be unaffected by high temperatures, and should not cause corrosion, softening, or swelling to metals and rubber. Currently, DOT3, DOT4, and DOT5 are the commonly used types. 2. Automotive brake fluid has a very low freezing point, ensuring good fluidity at low temperatures. It also has an extremely high boiling point, preventing vapor lock at high temperatures. When used, automotive brake fluid does not cause corrosion to metals or rubber.
10
2
Share

Is Neutral Gear P or N?

N stands for Neutral, which can be used when starting the vehicle, towing, or during temporary stops (such as at a red light). Below are the relevant explanations: 1. Gear Explanation: N (Neutral) is the neutral gear, used for brief stops; P (Parking) is the parking gear, used for long-term parking. To prevent the vehicle from rolling on a slope, always press the brake when in neutral. When the gear lever is in the "N" position, the power between the engine and the transmission is cut off. For short stops, you can place the lever in this gear and pull out the handbrake lever, allowing your right foot to move away from the brake pedal for a brief rest. 3. Starting the Vehicle: The vehicle can only be started in P or N gear. To shift out of P gear, you must press the brake. The use of N gear for starting is when the vehicle is to be driven forward immediately after starting. You can first turn on the power (without starting the engine), press the brake, shift the gear to N, then start the engine. After the engine runs for 3-5 minutes, shift to D gear and drive forward directly. This avoids the transmission experiencing a reverse impact when starting in P gear, which requires passing through R gear.
8
4
Share

How to Check the Production Date on a Tire?

Similar to the production date of a car, the production date of a tire is marked on the outer side of the tire. You don't need to flip the tire over; it's located on the outer side, on the sidewall of the tire. There is a set of numbers, and the last four digits of this marking provide information about the production date. It consists of four digits in the format "AABB". The details are as follows: 1. The first two digits "AA" indicate the week of the year, and the last two digits "BB" indicate the year. 2. Generally, the 11-digit number and letters immediately following the "DOT" marking on the tire sidewall represent the identification number or serial number of the tire. The last four digits of the serial number indicate the production date of the tire. The format of the tire production date code is: the first two digits represent the production week, and the last two digits represent the production year. For example, if the last four digits of DOT are 4117, it means the tire was produced in the 41st week of 2017.
9
1
Share

What does base model mean?

Base model refers to a simplified configuration. It lacks features such as genuine leather seats, power windows, and many electronic controls, indicating a lower level of equipment. Below are introductions to other configurations: 1. Standard model: It includes all the basic electric controls you'd expect, such as power windows, power steering, air conditioning, etc. 2. Mid-range model: Slightly more advanced than the standard model, it not only has all the features of the standard model but may also include additional elements like more airbags, a sunroof, genuine leather seats, power seats, seat heating, etc. 3. High-end model: Also known as the top model, it comes with higher configurations and is generally priced about one-third higher than the base model. It can be considered the flagship version of the car model, often distinguishable by its exterior features like alloy wheels, tires, and emblems. It may also include many additional electronic controls such as advanced suspension, navigation systems, onboard computers, panoramic sunroofs, EPS, etc.
18
4
Share

Should You Shift to N or P Gear at a Red Light?

The specific gear to choose when waiting at a red light entirely depends on the duration of the traffic light. Here are the relevant recommendations: 1. For less than 30 seconds: It is advisable to keep the gear in D and engage the handbrake. For models equipped with a braking system, such as Mercedes-Benz or BMW series with an automatic parking system, you can activate the stop-and-go function by pressing the brake pedal. Once the light turns green, simply press the accelerator to proceed. 2. For more than 30 seconds: It is recommended to shift to N gear and engage the handbrake. Shifting to N gear effectively protects the transmission and gives the mechanical components a rest period, which is also a way to care for your vehicle. 3. For 30 seconds to 60 seconds: You can choose to shift to neutral or P gear; the choice is not absolute. 4. For more than 60 seconds: It is best to shift to P gear, as doing so allows you to relax completely, unlike staying in D gear or neutral where you still need to monitor the vehicle's status.
7
1
Share

Should You Press the Clutch When Going Uphill in First Gear?

During the uphill section of the driving test (Subject 2), you should gently lift the clutch to the semi-engaged state to ensure the vehicle moves forward smoothly. It is not necessary to fully release the clutch, so you should press it. Here is some related information: 1. Reverse Parking: This tests the driver's ability to maneuver the car in a confined space. Reverse parking is an assessment point in the driving test, requiring the driver to correctly reverse the vehicle into a parking space from both sides while moving. 2. Parallel Parking: Parallel parking is becoming increasingly common in urban areas, especially as parking spaces in regular lots become more scarce. Many places now designate parking spaces along the sides of streets, known as 'parallel parking spots.'
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.