What is the Key Factor for a Car to Move?

2 Answers
LeLeah
07/28/25 5:02pm
The key factor for a car to move lies in the power system: Engine Oil Inspection: The inspection of engine oil mainly involves checking the oil level, which should be replaced every 5,000 kilometers or six months. When checking the oil, it is important to measure it after the oil temperature has risen. Transmission Oil Inspection: The inspection of transmission oil primarily focuses on the oil level and quality, which should be replaced every 20,000 kilometers or one year. Checking the transmission oil requires shifting gears first. Brake Fluid Inspection: The inspection of brake fluid is crucial as it directly affects the response of the brake pedal. Power Steering Fluid Inspection: For power steering fluid, only the oil level needs to be checked to ensure it is sufficient.
Was this review help?
9
0
Share
Maeve
08/11/25 11:34pm
I believe the key to a car's movement lies in whether the engine can function properly. The engine is the power source, just like the human heart, and must operate healthily. First, the ignition system must be reliable: the spark plugs need to produce sparks to ignite the air-fuel mixture; the battery must have sufficient charge so the starter motor can rotate the engine. Second, the fuel supply must be unobstructed: the fuel tank should have enough fuel, the fuel pump must provide adequate pressure, and the fuel lines should not be clogged. Mechanical wear is also a concern: if there are issues with piston rings or valves, poor compression can prevent ignition. On the electrical side, wiring connections must be secure to avoid short circuits or poor contact. With 30 years of driving experience, I’ve learned that regular maintenance is essential—such as checking spark plugs and the battery every six months—to prevent breakdowns that could disrupt trips. Cold weather often makes engine starts difficult, so ensuring all components work smoothly is crucial for a smooth drive.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What is the ground clearance of the Lamando?

The ground clearance of the Lamando is 114mm. The Lamando is a compact car under SAIC Volkswagen. Taking the 2021 Lamando as an example, its body dimensions are: length 4615mm, width 1826mm, height 1425mm, wheelbase 2656mm, fuel tank capacity 51l, trunk capacity 480l, and curb weight 1325kg. The 2021 Lamando is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 131PS, maximum power of 96kW, maximum torque of 225Nm, and is paired with a 7-speed dual-clutch transmission.
17
5
Share

Where is the Clutch Pressure Plate Installed?

The clutch pressure plate is installed on the engine's flywheel and rotates along with the engine. The functions of the clutch are: 1. Gradually increasing the driving force of the vehicle to ensure smooth starting; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration impact from the engine and extending the service life of transmission gears. Clutch maintenance and servicing items include: 1. Checking the fluid level in the clutch reservoir; 2. Inspecting the clutch hydraulic control mechanism for leaks; 3. Depressing the clutch pedal and checking pedal responsiveness; 4. Checking the clutch pedal height; 5. Inspecting the clutch release point; 6. Evaluating clutch operation performance; 7. Bleeding air from the clutch hydraulic system.
19
0
Share

How to Remove the Lavida Driver's Door Panel?

To remove the Lavida driver's door panel, first unscrew the bolts at the bottom of the door. Then use a screwdriver to pry open a gap from the bottom of the door. Pull outward with your hand and lift upward to detach the door panel. Taking the 2021 Lavida as an example, it is a compact car with body dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm and a trunk capacity of 510L. The 2021 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
3
3
Share

Where is the Cruze Flasher Relay Located?

The flasher relay for the Cruze is located under the engine hood. The flasher relay, also known as the turn signal relay, functions to generate intermittent current to supply the turn signal lights, causing them to flash on and off to indicate the direction of the vehicle's movement. Taking the 2018 Cruze as an example, it belongs to the compact car category with body dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. The 2018 Cruze features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L turbocharged engine delivering a maximum horsepower of 114ps, a maximum power of 84kw, and a maximum torque of 146nm, paired with a 6-speed manual transmission.
12
1
Share

What are the differences between the 2007 and 2008 Cayenne models?

The differences between the 2007 and 2008 Cayenne models are: 1. Different maximum horsepower: The 2007 Cayenne has a maximum horsepower of 500ps; the 2008 model has a maximum horsepower of 550ps. 2. Different maximum torque: The 2007 Cayenne has a maximum torque of 700nm; the 2008 model has a maximum torque of 750nm. 3. Different maximum power: The 2007 Cayenne has a maximum power of 368kw; the 2008 model has a maximum power of 404kw. Both the 2007 and 2008 Cayenne models have the same body dimensions: length 4795mm, width 1928mm, height 1694mm, and a wheelbase of 2855mm.
1
5
Share

Do I need to bring a fire extinguisher when driving on the highway?

You should bring a fire extinguisher when driving on the highway. The precautions for highway driving are: 1. Both the driver and the front passenger should fasten their seat belts, and the driver should not answer phone calls; 2. Avoid jerking the steering wheel while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle ahead, you must turn on the turn signal in advance; 4. When overtaking, only use the adjacent lane. After overtaking, you should immediately return to the driving lane. Do not ride or drive on the lane divider; 5. Do not reverse, drive in the opposite direction, cross the central divider to make a U-turn or turn, do not test drive or drive a training vehicle, and do not overtake or park on the ramp; 6. Maintain a distance of more than 100 meters between vehicles. When the speed is below 100 kilometers per hour, the distance from the vehicle ahead in the same lane can be appropriately shortened, but it should not be less than 50 meters.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.