What is the IX35?

Can New Energy Passenger Cars Drive on Highways?

New energy passenger cars can drive on highways. Definition of New Energy Vehicles: New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and driving systems, resulting in vehicles with advanced technical principles, new technologies, and novel structures. Therefore, new energy vehicles are permitted on highways. Classification of New Energy Vehicles: New energy vehicles include hybrid electric vehicles (HEV), battery electric vehicles (BEV), fuel cell electric vehicles (FCEV), hydrogen engine vehicles, as well as gas-powered vehicles, alcohol ether vehicles, etc.

16

3

Share

What is the hourly fuel consumption of the Caterpillar 336?

Caterpillar 336 has an hourly fuel consumption of 30L-36L. Main dimensions of Caterpillar 336: The Caterpillar 336 is a 36-ton class excavator from Caterpillar, equipped with a C9 engine with a rated power of 200 kW and a standard 1.67 cubic meter rock bucket. The total transport length is 11,150 mm, the total transport width is 3,190 mm, the total transport height is 3,340 mm, the total track length is 4,590 mm, and the track shoe width is 600 mm. Operating range: The maximum digging radius at ground level is 10,920 mm, the maximum digging depth is 7,390 mm, the maximum digging height is 10,240 mm, and the maximum dumping height is 7,200 mm.

4

5

Share

Why is the Mazda6 air conditioning cooling effect not good?

Here is a detailed introduction to the reasons why the Mazda6 air conditioning cooling effect is not good: 1. Lack of refrigerant: Refrigerant wear is mainly due to leakage. If the condenser leaks, it needs to be replaced. When the leakage is severe, oil stains can be seen on the surface of the condenser through the grille, which usually indicates a condenser leakage. 2. Damaged air conditioning flap: Damage to the air conditioning flap motor is relatively rare but not unheard of. The flap motor is usually located in the lower part of the instrument panel and serves as the main switch for the air conditioning vents. Once the flap is damaged, even if the air conditioning can produce cold air, it will only come out through gaps. 3. Dirty condenser: The purpose of cleaning the radiator and condenser is mainly for heat dissipation. If spring willow catkins accumulate on the condenser, it can cause issues such as high engine temperature or poor air conditioning performance. When cleaning, be sure to first use compressed air to blow away debris before washing with water, otherwise, it may have the opposite effect, leading not only to poor air conditioning but also increased fuel consumption. 4. Damaged air conditioning compressor, throttle valve, or expansion valve: If the low pressure is high and the high pressure is low, the compressor needs to be replaced. Faults in the expansion valve or throttle valve directly result in poor air conditioning performance. These checks are relatively complex and require professional repair shops. 5. Aging or loose belt: Generally, the belt will be recommended for replacement during maintenance at a 4S shop. If not replaced, slipping may occur during use, leading to belt breakage, belt noise, loss of power assistance, and poor air conditioning performance.

5

4

Share

Why does the engine need timing alignment?

The reason the engine needs timing alignment is that the timing system is a crucial component of the engine's valve train. By connecting to the crankshaft and maintaining a specific gear ratio, it ensures the precise timing of the engine's intake and exhaust cycles. The function of the timing system: When the engine is running, the piston's stroke, the opening and closing of the valves, and the ignition sequence must remain "synchronized" under the coordination of the timing system. Through the engine's timing mechanism, each cylinder achieves the perfect moment where the piston reaches top dead center, the valves close precisely, and the spark plug fires at the right instant. Components of the timing system: It typically consists of the timing belt, tensioner pulley, tensioner, water pump, and other related accessories.

14

5

Share

Where is the engine located?

Engine is located at the front of the vehicle. This is the most common engine placement method. In front-engine front-wheel drive configurations, the engine can be mounted either transversely or longitudinally, and can be positioned outside the wheelbase, within the wheelbase, or above the front axle. Mid-engine: Mid-engine refers to the placement of the engine behind the front axle but in front of the driver's seat. This layout aims to achieve better weight distribution, but it requires lengthening the vehicle body due to space constraints. Rear-engine: Rear-engine placement is typically used for high-power rear-wheel-drive models, with typical examples including urban buses, highway coaches, and high-performance sports cars commonly seen in cities.

18

5

Share

Why does the Verano center control screen touch malfunction?

There are two possible reasons for the black screen of the car's center control display: unstable power voltage of the car, or issues with the cables on the back of the center control display. No response when pressing buttons on the touch screen: If there is no response when pressing buttons on the touch screen and control cannot be achieved, it indicates a touch screen drift phenomenon. Simply re-enter the touch screen settings page to perform touch range calibration. Touch screen has display: If the touch screen has display and buttons respond when pressed but control cannot be achieved: the RFID of the touch screen does not match the RFID set in the host program, the ID of the wireless receiver does not match the ID set in the host program, or the wireless receiver is beyond the effective distance.

8

0

Share

What is the IX35?

Can New Energy Passenger Cars Drive on Highways?

What is the hourly fuel consumption of the Caterpillar 336?

Why is the Mazda6 air conditioning cooling effect not good?

Why does the engine need timing alignment?

Where is the engine located?

Why does the Verano center control screen touch malfunction?

What does it mean when the keyless entry function fails?

Is the Mazda CX4 a Hatchback or a Sedan?

Why is the central air vent of the Lynk & Co 01 not blowing air?

What to Pay Attention to When Switching from SUV to Sedan Driving