What is the issue with the Mercedes-Benz G-Class?

What Causes a Car with No Faults, Fuel, and Spark to Fail to Start?

The main reasons for a car with no faults, fuel, and spark failing to start are issues in the starting system, ignition system, or fuel supply system. You can try the following emergency measures. If the car still doesn't start after attempting these, it is recommended to visit a 4S shop to run a diagnostic scan and check for any fault codes to troubleshoot one by one. The solutions are as follows: 1. Common faults in the starting system: Starter failure and battery depletion. Countermeasures: If the battery is severely depleted and cannot start the vehicle, you can use a multimeter to test the voltage. If the voltage is below 10V, the battery cannot start the car. Ideally, the voltage should be above 12V. In case of battery depletion, you can charge it using a charger or jump-start the engine. For starter failure, use a multimeter to check if the starter has supply voltage. If there is voltage but no action, it indicates the starter is damaged and needs replacement at a repair shop. 2. Ignition system fault: Ignition misfire. Countermeasures: This might be caused by fouled spark plugs. Try removing and cleaning the spark plugs, then reinstall them and check if the car starts normally. 3. Fuel supply issue: Possible gasoline flow obstruction or faulty injectors. Countermeasures: Place the car in a warm environment for a while, and it may start. Alternatively, thoroughly clean the fuel system. For vehicles with carburetors, check if the rubber seal at the engine interface is loose or leaking air.

8

4

Share

Where is the chassis number of the Elysion located?

The chassis number of the Elysion is located at the lower right corner of the front windshield. Additionally, you can find the chassis number on the inner wall of the front engine compartment when the hood is opened. Some vehicles also have the chassis number on a metal plate at the bottom of the passenger side door sill. Below is additional information: 1. Engine Number: The arrangement and content of the engine number vary by manufacturer. It generally includes the engine model, production date, and a randomly assigned serial number from the production line. Some may also include a production location code, as long as the engine is manufactured according to the brand's standards. You can usually find the engine number in the following places: vehicle registration certificate, purchase invoice, factory certificate, operation license for commercial vehicles, vehicle purchase tax payment certificate, and government registration records. 2. Chassis Number: Also known as the Vehicle Identification Number (VIN), it is a unique code assigned by the manufacturer to identify a vehicle. The VIN consists of 17 alphanumeric characters and is sometimes referred to as the 17-digit identification code, chassis number, or 17-digit number. The combination of these characters ensures that no two vehicles of the same model will have the same number within 30 years, making it a unique identifier for the vehicle—often called the 'car's ID card.' You can typically find the VIN in the following locations: vehicle registration certificate and the lower left side of the front windshield.

8

4

Share

How to Properly Use a Turbocharged Engine?

Methods for properly using a turbocharged engine: 1. After starting the engine, do not immediately begin driving or aggressively press the accelerator: The turbocharger relies on engine oil for lubrication. When starting a cold engine, the oil's fluidity is poor, leading to inadequate lubrication and significant wear. Allow the engine to idle for a while before driving, especially in winter, where it should idle for at least two minutes before slowly moving off. This ensures the oil fully lubricates the bearings before the turbocharger operates at high speeds, preventing excessive wear due to poor lubrication. 2. After prolonged high-speed operation, do not immediately turn off the engine: During operation, part of the engine oil is supplied to the turbocharger for lubrication and cooling. If the engine is suddenly turned off while the turbo is running at high speed, the turbo will continue to spin due to inertia. However, since the engine has stopped, the oil pump also stops working, cutting off the oil supply to the turbo bearings. This leads to poor heat dissipation, localized overheating, and dry friction between the shaft and bushing, which can severely damage the bearings. 3. Choose high-quality oil and keep it clean: Turbocharged engines operate at higher temperatures and pressures, generating greater impact and compression forces. The turbocharger itself endures even higher speeds and temperatures, demanding superior oil quality and cleanliness. The oil used must have excellent anti-wear properties and high-temperature resistance. In addition to the manufacturer-recommended oil, synthetic or semi-synthetic high-quality oils can be used. High-quality oils maintain stable viscosity under high temperatures and speeds, providing robust oil film protection and ensuring proper lubrication for the turbocharged engine.

15

0

Share

How should a novice who just got a driver's license practice driving?

If you are a novice who just got a driver's license, the first thing is to familiarize yourself with the basic operations of the vehicle, such as starting, stopping, distinguishing between the brake and accelerator in emergencies, and shifting gears based on speed and RPM. Then, you can find a place with relatively less pedestrian and vehicle traffic, but don’t drive too fast. If the speed is too high, the braking time will be shorter. Another important point is to always obey traffic rules. Precautions for novice drivers are as follows: 1. After obtaining the driver's license, it is important to remember your first probationary period. During this probationary period, you are not allowed to drive alone on the highway. If a novice wants to drive on the highway, there must be a driver with more than three years of experience accompanying them in the passenger seat; otherwise, they may face fines and penalty points. 2. After the probationary period, the "Novice Driver" sticker should not be displayed on the car. It is common to see cars with "Novice Driver" stickers on the rear window on the road. If it is within the probationary period, it is naturally acceptable, but if not, you may face certain fines. 3. During the one-year probationary period, if 12 penalty points are deducted from the driver's license, it will be directly revoked. Therefore, you must be extremely cautious about this, as obtaining a driver's license is not easy. 4. After the probationary period, if the driver's license accumulates between 6 to 12 penalty points, the probationary period will be extended by one year, and within 30 days after the extension, you must retake the theoretical test (Subject 1).

13

3

Share

Should the Changan Eado use 92 or 95 octane gasoline?

Changan Eado can use 92 octane gasoline, and 95 octane gasoline is also acceptable. This gasoline grade is recommended in the official vehicle user manual for this car. In addition to checking the appropriate gasoline grade in the vehicle user manual, the Changan Eado also has it indicated on the fuel tank cap, which can be checked there as well. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, those between 10.0-11.5 should use 95 octane gasoline, and if the compression ratio is higher, 98 octane gasoline is recommended. However, with the application of some new technologies, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be tuned to use lower octane gasoline because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Changan Eado occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage, but the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, and the actual feedback will be poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Because the octane value is too low, the gasoline's ignition point decreases and it may ignite prematurely during the compression stroke. If combustion occurs before the spark plug ignites, resistance will arise during the upward stroke. This resistance will make the engine run very unstably. If it's mild knocking, it only increases noise and does not significantly damage the engine. However, if there is noticeable knocking, it indicates severe engine conditions. The vibration not only affects driving stability but can also cause abnormal wear on the pistons and cylinders, and in severe cases, even cylinder scoring.

16

2

Share

What are the test items for the automatic transmission vehicle in Subject 2?

The C2 Subject 2 test consists of 4 items: reverse parking, parallel parking, curve driving, and right-angle turning. Compared to the C1 manual transmission test, it excludes the hill start item. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), starting from June 1, 2021, the C2 and C5 Subject 2 tests no longer assess hill parking and starting. Reverse parking is one of the more challenging items in the Subject 2 test, so many test centers have designated it as the first test item. The key points for reverse parking are: the full-lock steering wheel point, the 30 cm correction point, and the parking point inside the bay. You must follow the specified route and sequence. The vehicle must be parked inside the bay without crossing the lines. Parallel parking focuses on aligning the front line of the parking space with the rear wheels, spotting the rear corner in the rearview mirror, and maintaining the distance between the wheels and the left dashed line. After parking, the wheels do not need to be straightened, and don’t forget to use the turn signal when exiting. The vehicle body must not cross the lines after parking, and the tires must not touch the lane boundary lines during movement. Curve driving, commonly known as the S-curve, is relatively easy for many students with good driving sense, who can complete it intuitively. However, some students misjudge the line positions during the actual test, leading to immediate failure by crossing the lines. The key to the S-curve is observing the reference points on the front hood and the position of the boundary lines. The wheels must not press the road edge lines. Right-angle turning is even simpler, essentially a simplified version of the exit part in reverse parking. The method for finding the reference point is the same as exiting the bay, based on the relationship between the horizontal line of the front hood and the front line (just touching or slightly delayed). Ensure the wheels do not press the road edge lines. Generally, the required training hours for C1 Subject 2 are 16 hours, while for C2 Subject 2, it’s 14 hours. Completing the required hours is a basic requirement for taking the Subject 2 test. Training hours can only be increased, not reduced, and additional test items require corresponding extra hours. Each training hour is 60 minutes, with effective teaching time not less than 45 minutes. If you fail Subject 2, you can retake it once. If you fail the retest, the current test session ends, and you must reschedule the test after 10 days. If you fail five consecutive test attempts (including retests, totaling 10 attempts), all previously passed subject scores will be invalidated, and you must restart from Subject 1.

15

1

Share

What is the issue with the Mercedes-Benz G-Class?

What Causes a Car with No Faults, Fuel, and Spark to Fail to Start?

Where is the chassis number of the Elysion located?

How to Properly Use a Turbocharged Engine?

How should a novice who just got a driver's license practice driving?

Should the Changan Eado use 92 or 95 octane gasoline?

What are the test items for the automatic transmission vehicle in Subject 2?

What to Do When the Car Air Conditioning Evaporator Freezes?

What to Do When the Windshield Washer Spray is Weak?

What to Do When Car Tires Show Excessive Tire Pressure?

How to Release Static Electricity from the Body in Winter?