What is the issue with high temperature at idle speed?

2 Answers
VonIsabel
07/24/25 8:58pm
Rust in the radiator causing poor water flow, unable to dissipate heat normally. Below is a related introduction about high temperature at idle speed: 1. Reasons for engine high temperature at idle speed: There is a water pump in the car's cooling system that forces the coolant to circulate. Additionally, there is a thermostat responsible for determining whether the coolant undergoes a small or large circulation. 2. Hazards of engine high temperature at idle speed: Due to prolonged idling, the engine temperature remains too low, leading to incomplete fuel combustion, which can easily cause carbon buildup, clog the fuel injectors, and severe carbon deposits may cause the piston rings to seize or even break. Prolonged idling also results in poor fuel atomization, where unburned atomized diesel condenses and washes down the cylinder walls, entering the lubricating oil, diluting and degrading it. This leads to insufficient lubrication for the engine's moving parts, accelerating engine wear.
Was this review help?
12
1
Share
DeIsla
08/11/25 11:21am
I once drove an old car for a while and found it quite alarming when the engine temperature spiked at idle. Once during a traffic jam, the temperature gauge shot straight to the red line, so I immediately pulled over. Upon inspection, I found that a significant amount of coolant had leaked, likely due to aged and cracked hoses. The fan wasn't spinning properly either, and after testing, I realized the temperature sensor was faulty. Such issues are quite common, so it's advisable to regularly monitor the cooling system, checking fluid levels and fan operation. If frequent high temperatures at idle occur, it might be due to a stuck thermostat causing poor heat dissipation. Get it fixed at a professional shop as soon as possible—delaying repairs could lead to blown head gaskets, which poses significant risks. Remember, safety first—don't wait too long to address the issue.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

Which Button is the Defogger Switch for Sedans?

The defogger switch is located on the center console panel, marked with an icon of the front windshield and three upward-curving lines, resembling a fan-shaped airflow symbol. Below are methods for handling car defogging: 1. Use the air conditioning to defog. Locate the front window defogger switch, set the fan speed to maximum, turn on the A/C switch, and adjust the temperature to the lowest setting. 2. If the car has just been started, avoid turning on the air conditioning immediately. Wait for the engine to warm up for a few minutes until the water temperature rises, then start heating. Set the fan speed to maximum and activate the front window defogging mode. 3. Open windows to allow air convection, which increases airflow and reduces the temperature difference between the inside and outside of the car, thereby weakening the conditions for fog formation. 4. Use a defogging spray. Simply spray it evenly on the glass surface and wipe it clean with a dry towel. Its principle involves using surfactants to form a protective film on the glass surface, altering the surface tension of water molecules, causing fog droplets to coalesce into larger droplets that do not obstruct vision.
2
0
Share

What Generally Causes Air-Fuel Ratio Faults?

Accumulated dirt in the air filter clogging the intake passage, resulting in reduced air intake and an overly rich fuel mixture. Below is relevant information about the air-fuel ratio: 1. Introduction: The air-fuel ratio (A/F) refers to the ratio of air mass to fuel mass in the combustible mixture (A: air, F: fuel). It is a crucial parameter during engine operation, significantly impacting exhaust emissions, engine power, and fuel economy. 2. Principle: To achieve optimal exhaust catalytic efficiency (above 90%), an oxygen sensor must be installed in the engine exhaust pipe for closed-loop control. The working principle involves the oxygen sensor measuring oxygen concentration in the exhaust, converting it into an electrical signal sent to the ECU, thereby maintaining the engine's air-fuel ratio within a narrow, near-ideal range (14.7:1). If the air-fuel ratio is too high, while CO and HC conversion rates slightly improve, NOx conversion rates drop sharply to 20%. Therefore, ensuring the optimal air-fuel ratio is essential, with proper oxygen sensor operation being key to achieving this.
17
3
Share

What are the penalties for using a temporary license plate that is not allowed to leave the province outside the province?

Temporary license plates that are not allowed to leave the province, if used outside the province, will result in a fine of 200 yuan and 12 penalty points. Temporary license plates are divided into the following two types: 1. Temporary plates for administrative jurisdiction areas (sky-blue background with black characters and black borders): These are urban temporary plates. Vehicles with these plates are only allowed to drive within the jurisdiction and are not permitted to leave the province. The validity period of these plates is 15 days. 2. Temporary plates for cross-administrative jurisdiction areas (brown-yellow background with black characters and black borders): These are national temporary plates. Only vehicles with these plates are allowed to drive outside the province. The validity period of these plates is 30 days. 3. When applying for temporary plates, it is essential to choose the appropriate type based on your needs. If the vehicle owner has plans to travel outside the province, they must apply for the "brown-yellow background with black characters and black borders" temporary license plate, not the "sky-blue background with black characters and black borders" one.
2
2
Share

Why do hatchbacks have rear wipers while sedans don't?

The reasons why hatchbacks have rear wipers while sedans don't are as follows: 1. Structurally, sedans lack a suitable position for rear wipers: Hatchbacks are typically liftback models where the rear glass and tailgate are integrated. The wiper pivot is installed on the metal body beneath the rear window, so opening the tailgate doesn't affect the wiper. Sedans cannot mount the wiper pivot on the trunk lid (let alone on the glass itself). If installed on the trunk lid, when opened, the glass remains stationary, causing misalignment between the wiper and glass, making it unsuitable for installation. 2. From an aerodynamic perspective, sedan rear windows stay cleaner: For straight-back hatchbacks, the airflow separation point is at the roof's rear, creating turbulent low-pressure zones that lift debris onto the rear window. Sedans have their separation point at the trunk edge, only dirtying the rear bumper while keeping the window clean. The curved rear window design also helps blow away debris. 3. Sedans' trunk blocks wheel spray: The additional trunk compartment in sedans effectively shields most road spray generated by rear wheels, preventing dirty water from reaching the rear window. This reduced contamination need makes rear wipers less necessary for sedans.
2
5
Share

Where is the Subaru Forester oil filter located?

Subaru Forester oil filter is located at the oil pipe connection point on the vehicle's chassis. Oil filter: The oil filter, also known as the oil cleaner, functions to remove impurities, colloids, and moisture from the engine oil, delivering clean oil to various lubrication points. Filter: The diesel generator set's filter is a specialized pre-filtration device for diesel engines, capable of removing over 90% of mechanical impurities, colloids, and asphaltenes from diesel, ensuring maximum diesel cleanliness and extending engine service life. Unclean diesel can lead to abnormal wear in the engine's fuel injection system and cylinders, resulting in reduced engine power, rapid increase in fuel consumption, and significantly shortened generator service life. Using a diesel filter can greatly improve the filtration precision and efficiency of engines equipped with felt-type diesel filters, extend the service life of imported high-quality diesel filters several times, and achieve noticeable fuel savings. How to install a diesel filter: The installation of a diesel filter is extremely simple. Just connect it in series to the fuel supply line using the pre-installed oil inlet and outlet interfaces. Pay attention to connect according to the direction indicated by the arrow; the oil inlet and outlet directions must not be reversed. During initial use or when replacing the filter element, fill the diesel filter with diesel and ensure proper venting. The vent valve is located on the end cover of the barrel.
3
1
Share

Why Does the Charging Cable of New Energy Vehicles Get Hot?

There are generally several situations where the charging plug of a new energy vehicle gets hot during charging. Here is a detailed analysis: 1. Loose plug and oxidized contact surface: A loose plug and oxidized contact surface can lead to poor contact during charging. If there is loose contact at the connection point during charging, the voltage between the contact points can be enough to break down the air gap, forming an arc and sparking, which may ignite nearby flammable materials and cause a fire. If the charging port is not securely connected, poorly maintained, or has been in operation for a long time, an oxide film that conducts poorly may form at the connection point. Oxidation of the charging plug can easily lead to excessive contact resistance, causing the plug to overheat. 2. Issues with the charging port's electronic lock: Regarding the charging port, the model and size are standardized, and the vehicle's charging port has corresponding safety requirements for current, etc. The charging port should be equipped with an electronic locking device to prevent accidental disconnection during charging. If the electronic lock is not securely engaged, the charging port may continue to charge, leading to overheating. 3. Quality issues with the charging port: Due to different materials of the battery cells, the charging port may heat up when the current is too high. However, different materials have varying heat dissipation properties. If the material is of poor quality, it may result in poor heat dissipation, leading to overheating.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.