What is the issue when the Chery New A3 engine occasionally becomes more powerful?

1 Answers
DeOwen
07/29/25 4:00pm
Here are the specific reasons why the Chery New A3 engine occasionally becomes more powerful: Damaged ignition coil: Check the ignition coil for any signs of damage, bulging, or cracks. A damaged ignition coil can cause the car to shake when accelerating, with intermittent power delivery. Spark plug issues: Inspect the spark plugs to see if the ignition gap has widened or if there is excessive carbon buildup. Carbon deposits or an enlarged ignition gap can directly affect the ignition performance. Exhaust system malfunction: Examine the exhaust system to determine if the three-way catalytic converter is clogged. A blocked three-way catalytic converter can make the engine feel sluggish when accelerating, as high-temperature gases cannot be fully released.
Was this review help?
7
3
Share
More Forum Discussions

What is the fuel tank capacity of the BJ40 in liters?

BJ40 has a fuel tank capacity of 75 liters, as officially announced. For the BJ40 2022 2.0T automatic four-wheel-drive official edition and the automatic four-wheel-drive Ring Tower Champion edition, the recommended fuel grade is 92 octane, with a fuel consumption of 9.9L per 100 kilometers. A full tank can cover a distance of approximately 757km. The BJ40 2022 2.3T automatic four-wheel-drive Excellence edition requires 95 octane fuel, with a fuel consumption of 11.5L per 100 kilometers, allowing a range of about 652km on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the fuel level. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, leaving some space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity.
9
4
Share

Does Ferrari Have Automatic Transmission?

Ferrari has automatic transmission. Introduction to Ferrari: Maserati is an Italian luxury car manufacturer founded on December 1, 1914, in Bologna, with its headquarters now located in Modena. The brand's emblem features a trident. In 1993, Fiat S.p.A. acquired Maserati, allowing the brand to be preserved. Maserati was once part of Ferrari and is now directly owned by Fiat Chrysler Automobiles. Powertrain: In terms of powertrain, Maserati offers the Levante with three options: a 3.0-liter V6 twin-turbocharged petrol engine, a 3.8-liter V8 twin-turbocharged petrol engine, and a 3.0-liter V6 turbocharged diesel engine. For transmission, the new vehicle is equipped with an 8-speed automatic transmission, and it also comes with a four-wheel-drive system.
18
0
Share

What are the reasons for multi-cylinder misfire in Jetour X70?

Jetour X70 multi-cylinder misfire is caused by poor spark plug contact, excessive self-induced voltage in the fuel injector, and poor heat dissipation of the transistor. Below are detailed explanations for the aforementioned reasons: Poor spark plug contact: If ignition fails at a certain moment, a cylinder misfire will occur. The spark plug needs to be replaced or inspected. Excessive self-induced voltage in the fuel injector: This can cause sticking in the next working cycle, requiring inspection and repair of the fuel injector. Poor heat dissipation of the transistor: Poor heat dissipation of the transistor inside the computer board leads to the ignition coil not working. Insufficient cylinder pressure results in ignition failure, necessitating inspection and repair of the transistor.
5
2
Share

Introduction to the Gears of Dongfeng Peugeot Automatic Transmission Vehicles?

Dongfeng Peugeot automatic transmission gear introduction is as follows: The P gear is the parking gear: used when the vehicle needs to be parked for a long time. After engaging the P gear, the parking pawl will engage with the gear to keep the vehicle in a mechanically stationary state. It should be noted that the P gear should only be engaged after the vehicle has come to a complete stop, otherwise it may cause damage to the transmission. The D gear is the drive gear: when moving forward, first press the brake and shift to D gear, then release the handbrake and press the accelerator. While driving, this gear will automatically shift between 1st and the highest gear according to traffic conditions. The lowest gear should be shifted to 1-2 when encountering slow-moving traffic such as congestion, which can reduce energy consumption. Additionally, it is important to note that the speed must be reduced before shifting to D gear.
14
5
Share

What are the pedals in an automatic transmission car from left to right?

In an automatic transmission car, the pedals from left to right are the brake pedal and the accelerator pedal. Introduction to the brake pedal: The brake pedal, as the name suggests, is the pedal that restricts power, i.e., the pedal for the foot brake. The brake pedal is used for deceleration and stopping and is one of the five major control components in car driving. It is used very frequently. The driver's control level directly affects driving safety. Situations where the brake pedal should not be used: When driving downhill for a long distance in a small passenger car, it is recommended to use a low gear and rely on engine braking for deceleration, avoiding the use of the brake pedal as much as possible; for large vehicles or heavily loaded vehicles going downhill for a long distance, remember not to press the brake pedal continuously; instead, use engine braking for deceleration. The reason is to prevent brake failure. Introduction to the accelerator pedal: The accelerator pedal, also known as the throttle pedal, is used to control the vehicle's speed. When accelerating or starting the car, it is also important to press the accelerator pedal gently to prevent sudden jerking of the car, which could lead to safety hazards. Precautions for automatic transmission cars: Avoid sudden braking and stopping while driving; maintain a safe following distance, anticipate road conditions, and brake in advance. For automatic transmission models, when waiting at a red light for a long time, do not keep the gear in N and continuously press the brake pedal; instead, shift to N and engage the handbrake.
1
1
Share

What is the fuel consumption of the hybrid Highlander?

The hybrid Highlander has a combined fuel consumption of 9.9 liters per 100 kilometers under standard driving conditions. Below are some factors related to fuel consumption: Driving habits and road conditions: Fuel consumption is greatly influenced by driving habits and road conditions. Avoid aggressive acceleration; gradual acceleration from a start is the most fuel-efficient. To save fuel, avoid heavy throttle input when starting, as this can increase fuel consumption by 2 to 3 times compared to normal acceleration. Braking: Maintaining a safe distance and avoiding frequent braking can save more fuel. If you don't keep a safe distance, you may need to brake frequently on the road. When braking, an automatic transmission vehicle will downshift, requiring the engine to work harder to regain speed, which consumes more fuel, especially when starting from a stop or in low gear.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.