What is the introduction to the Honda Civic automatic transmission?

1 Answers
OGemma
07/30/25 10:41am
Here is the introduction to the Honda Civic automatic transmission gears: 1. All gears: The automatic transmission has P, R, N, D, 2 or S, L or 1. 2. Parking gear: P is the parking gear, also known as the parking position. 3. Other gears: R is the reverse gear, N is the neutral gear, D is the forward gear, also known as the drive gear. 4. Sport mode: S or 2 represents the sport mode. 5. Low gear: L or 1 is the low gear, also known as 1st gear. Here is extended information on the differences between manual and automatic transmissions: 1. Learning period: Manual transmission cars are more complex than automatic ones, so the learning period is different. Typically, learning to drive a manual transmission car takes at least one month longer than an automatic one, and due to the greater difficulty, the pass rate for the driving test is also lower. 2. Obtaining a driver's license: The manual transmission license is C1 level, while the automatic transmission license is C2 level. Holders of an automatic transmission license cannot drive manual transmission cars, but holders of a manual transmission license can drive automatic transmission cars. 3. Cost: Because manual transmission is more difficult to learn and has a lower pass rate, its cost is generally cheaper compared to automatic transmission tuition fees, which are usually more expensive.
Was this review help?
19
3
Share
More Forum Discussions

Which way to turn the steering wheel when reversing to the left?

When reversing to the left, turn the steering wheel to the left. Precautions when reversing: 1. Observe and understand the surroundings and road conditions, and reverse only when it is safe; 2. Maintain a steady speed to prevent stalling or sudden backward movements, which could lead to accidents; 3. Do not obstruct the passage of other vehicles; 4. Reverse in the intended direction without deviating; 5. Avoid forcefully turning the steering wheel when the vehicle is stationary to prevent tire wear and damage to steering components. The method for reversing includes: 1. Walk around the car to check its condition and the road; 2. Adjust the rearview mirrors; 3. Turn on the headlights or brake lights to gauge the distance from obstacles; 4. Park in the same direction as adjacent vehicles; 5. Pay attention to the front of the car; 6. Turn the steering wheel left when reversing left and right when reversing right.
19
4
Share

What is the battery model for the Lexus ES?

The battery model for the Lexus ES is 80d26l12v70ah. Below are the body dimensions and configuration details of the Lexus ES: Body dimensions of the Lexus ES: The Lexus ES has a length of 4975mm, width of 1866mm, and height of 1447mm, with a wheelbase of 2870mm, a fuel tank capacity of 60.6l, a trunk capacity of 454l, and a curb weight of 1610kg. Configuration details: The Lexus ES features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 173ps, a maximum power of 127kw, and a maximum torque of 208nm, paired with a continuously variable transmission.
4
1
Share

What are the reasons why the Volkswagen Tiguan won't start?

Here are the reasons why the Tiguan won't start: 1. Excessive carbon deposits cause the engine oil to be below normal levels, leading to insufficient lubrication and stalling. Replace the engine oil to solve the problem; 2. The crankshaft position sensor's resistance value is abnormal, causing the crankshaft speed signal to disappear after the engine warms up, resulting in engine stalling. Visit a repair shop to adjust the crankshaft position sensor's resistance value; 3. Ignition system failure, overheating of the ignition module preventing normal operation, or ignition voltage failure causing engine stalling. Replace the spark plugs or adjust the ignition voltage; 4. Abnormal throttle signal voltage or improper engine computer control can cause the vehicle to stall while driving. Loss of throttle signal leads to insufficient fuel supply during ignition or driving, causing the vehicle to stall. Visit a repair shop to refresh the throttle data and adjust the central control.
3
3
Share

Can National 5 Vehicles Be Registered?

National 5 vehicles can still be registered in regions or cities where the National 6 standard has not been implemented. However, in some areas or cities where the National 6 standard has already been implemented, National 5 vehicles cannot be registered. Below is relevant information about vehicle registration: 1. Before Registration: Registration first requires the vehicle's certificate of conformity. Keep the triplicate invoice for the vehicle purchase, then pay the vehicle purchase tax and obtain the main and auxiliary tax certificates before registering at the vehicle management office. 2. Selecting a License Plate After Approval: After the vehicle passes inspection, you can proceed to choose a license plate. 3. Regulations for Vehicle Registration: If you have obtained a motor vehicle but have not yet registered it and need to drive it temporarily within the administrative region, a temporary license plate valid for no more than 15 days will be issued.
10
2
Share

How to Repair a Broken Fender Liner?

When the fender liner is broken, it needs to be repaired at a professional repair shop, as car owners cannot fix it themselves. The fender, also known as the wing panel, is divided into front and rear fenders based on its installation position. Nowadays, some cars have fenders integrated into the body as a single unit during production. However, some cars have independently assembled fenders, especially the front fenders, as they are more prone to collisions and are easier to replace as a whole. Below are the steps to remove the fender liner: 1. First, use a jack to align with the support points under the car, then lift the chassis and remove the tire. 2. Next, remove the screws and clips securing the fender liner and take out the damaged fender. Of course, clean any mud or debris under the fender. 3. Finally, install the new fender by following the reverse steps of the removal process.
17
0
Share

Where is the Peugeot 508's Cabin Air Filter Located?

The Peugeot 508's cabin air filter is located above the accelerator pedal under the dashboard on the driver's side, hidden at the bottom of the center console. The steps to replace the air filter are: 1. Remove the cover plate in contact with the outside of the right foot; 2. Remove the cover plate below the steering wheel; 3. Open the side cover of the cabin air filter; 4. Take out the cabin air filter for replacement. The Peugeot 508 has a body length, width, and height of 4826mm, 1855mm, and 1465mm respectively, with a wheelbase of 2815mm. The Peugeot 508 is equipped with a 2.0L engine, which has a maximum power of 147PS and a maximum torque of 200Nm, paired with a 5-speed manual transmission.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.