What is the intake form of the manual S-Design engine?

What brand is the engine of the Fengshen AX7?

The Dongfeng Fengshen AX7 is equipped with two engines from the French PSA Group: a 2.0L and a 2.3L. The model number for the 2.0L is PSA RFN10LH3X, and for the 2.3L, it is PSA 3FY10XP01. The 2.0L engine has a maximum power output of 108kW and a peak torque of 200Nm, while the 2.3L engine delivers a maximum power of 126kW and a peak torque of 230Nm. The 2.0L variant can be paired with either a 5-speed manual transmission or Aisin's second-generation 6-speed automatic transmission, whereas the 2.3L variant is only available with the 6-speed automatic transmission. For the daily maintenance of the Fengshen AX7's engine, the following methods are recommended: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD to SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB to CD grade diesel engine oil according to mechanical load, with the selection standard meeting or exceeding the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any lubricating oil will degrade over time with use. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil, but in larger quantities, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates smoothly but also extends the overall lifespan of both the radiator and the engine.

16

2

Share

Can I still use the manual lane if I have ETC?

Vehicles with ETC can use the manual lanes on highways, just like regular vehicles using manual lanes, by queuing up to take a card. There are two ways to take a card in the manual lane: one is where a professional staff member hands you the card, and the other is where the driver self-serves by taking the card from the card dispenser. When passing through the toll station, it is essential to slow down and proceed in an orderly manner, avoiding any congestion caused by cutting in line. ETC stands for Electronic Toll Collection, which refers to the electronic toll system. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and driving license. If the application is made by someone other than the owner, the agent's valid ID card must also be provided. The photocopy of the driving license should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway toll fees is required. Applicants must be between 18 and 60 years old, and the vehicle must be registered under their name. How ETC works: Through an onboard electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, it settles transactions with the bank in the background, allowing vehicles to pay highway or bridge tolls without stopping when passing through toll stations. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Reduces noise and exhaust emissions by allowing vehicles to pass through toll stations without stopping; Cost-effective: Reduces wear and tear and fuel consumption by minimizing vehicle starts and stops; Improved efficiency: ETC lanes can theoretically increase passage efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

18

1

Share

What is the tire pressure range for the Ford Focus?

The normal tire pressure range for the Ford Focus is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Ford Focus tire pressure monitoring function displays the values of all tires on the dashboard. The Focus tire pressure monitoring system automatically monitors tire pressure in real-time while driving and alerts the driver in case of tire leaks or low pressure. A system fault indicator light will illuminate to ensure driving safety. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, lowering driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various tire parts, causing abnormal heat due to excessive rolling; weakens cord and rubber functions, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it generally indicates one of the following three reasons: Abnormal tire pressure: Typically, an alert is triggered if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system continues to record the previous data, causing the indicator light to illuminate. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure fault light will illuminate. For sensor damage, the only solution is to replace it with a new component.

12

0

Share

Is modifying the exhaust system illegal?

Modifying a vehicle's exhaust pipe constitutes altering the registered structure of the vehicle and may result in penalties. Below is relevant information about automotive exhaust pipes: 1. Introduction: Automotive exhaust bellows, also known as flexible exhaust pipes, are installed between the engine exhaust manifold and the muffler. They provide flexible connections for the entire exhaust system, serving to reduce vibration and noise, facilitate installation, and extend the lifespan of the exhaust muffler system. 2. Classification: Exhaust pipes are generally categorized into: standard OEM pipes, backpressure pipes, semi-backpressure pipes, and straight pipes. 3. Function: Installed between the engine exhaust manifold and muffler, exhaust pipes function to reduce vibration and noise while prolonging the service life of the exhaust muffler system.

17

0

Share

Does a Car's Front Wheels Crossing the Line Count as Running a Red Light?

No. If the front wheels of the vehicle just cross the stop line when the light is red, and the vehicle stops immediately without moving further, it will not be considered running a red light. However, if the vehicle continues to proceed in violation of the rules, it will be deemed as running a red light, resulting in a 6-point penalty. If the vehicle fully crosses the line and stops only after completely passing the line, affecting the passage of other vehicles or pedestrians, it will be penalized for crossing the line and stopping, typically resulting in a 3-point deduction on the driver's license and a fine. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states the following for motor vehicle and non-motor vehicle traffic signals: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. When the red light is on, right-turning vehicles may proceed if they do not obstruct the passage of other vehicles or pedestrians. At intersections without non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians must follow the motor vehicle traffic signals. The new traffic regulations clearly define three necessary conditions for a vehicle to be considered running a red light: The vehicle illegally crosses the stop line. The vehicle illegally enters the intersection. The vehicle illegally crosses the opposite stop line. Electronic police (traffic cameras) capture three complete video images to determine a vehicle running a red light: an image of the vehicle's violation, an image of the vehicle's license plate, and a panoramic image. There are three scenarios for determining whether a vehicle has run a red light while driving: If the vehicle's front wheels cross the stop line or both front and rear wheels cross but the rear of the vehicle does not fully pass the stop line, and the vehicle stops immediately, traffic police will not penalize it as running a red light. However, the driver may still be penalized for improper parking, resulting in a 3-point deduction. If the vehicle's front wheels cross the stop line, regardless of whether the entire vehicle has fully crossed, and the vehicle stops and then reverses, being captured by traffic cameras in two complete moving images, it will be treated as running a red light, resulting in a 6-point deduction and a fine. If the entire vehicle fully crosses the stop line and stops or continues forward, and within one red light cycle, the traffic cameras capture the three complete images constituting a red light violation, the vehicle will be penalized for running a red light, regardless of whether it proceeds to the intersection or crosses the opposite stop line, resulting in a 6-point deduction and a fine. The new traffic regulations state: driving a motor vehicle in violation of traffic signals will result in a 6-point penalty. However, not all violations will lead to a 6-point deduction. For example, turning left in a straight-only lane will still be penalized under the "Road Traffic Safety Law" as violating a prohibition sign, resulting in a 3-point deduction. Additionally, red light violations recorded by cameras will only result in a fine, with no point deduction.

14

3

Share

How many points will be deducted for parking on the elevated road?

Parking in the high-speed lane will result in a 12-point penalty from the police. Here is the relevant information: 1. Regulations: According to the rules, vehicles driving on the highway must maintain a minimum speed of 60 kilometers per hour and a maximum speed of 120 kilometers per hour. There is no unified speed limit for lanes on the highway, as different sections may have different limits. Drivers can follow navigation prompts or highway signs for guidance. 2. Notes: Generally, on highways, the speed limit for the first lane is between 110 and 120 kilometers per hour, the second lane between 90 and 110 kilometers per hour, and the third lane between 60 and 90 kilometers per hour. Vehicles must adhere to these speed limits.

20

3

Share

What is the intake form of the manual S-Design engine?

What brand is the engine of the Fengshen AX7?

Can I still use the manual lane if I have ETC?

What is the tire pressure range for the Ford Focus?

Is modifying the exhaust system illegal?

Does a Car's Front Wheels Crossing the Line Count as Running a Red Light?

How many points will be deducted for parking on the elevated road?

How many types of engines does the Teramont use?

What are the reasons for the Volkswagen Sagitar's air conditioning not cooling?

Is the engine of the Hongqi HS5 domestically produced?

What Causes the Throttle to Be Hard to Press Down?