What is the installation method for the Roewe i5 car navigation system?

1 Answers
LaZachary
07/29/25 8:08pm
The installation method for the Roewe i5 car navigation system is as follows: 1. Use a dedicated plastic pry tool to pry open the edges of the storage box trim panel; 2. Remove the screws beneath the storage box and use a pry tool to detach the decorative strips on both sides; 3. Use a Phillips screwdriver to unscrew the screws on the central control panel and remove the main unit; 4. Route the power cable and DVD cable of the car navigation system through the space between the two air vents, and properly position the GPS antenna. The 2020 Roewe i5 is a compact car with the following dimensions: length 4601mm, width 1818mm, height 1489mm, wheelbase 2680mm, fuel tank capacity 45L, trunk capacity 512L, and curb weight 1270kg.
Was this review help?
12
5
Share
More Forum Discussions

What are the consequences of a broken engine timing belt?

If the timing belt breaks, the valves and ignition system will fail to operate properly. In severe cases, it may lead to engine repairs or even replacement. Generally, a broken timing belt can cause abnormal noises when starting the car, inability to accelerate or sluggish acceleration, or ignition misfires, which may result in engine failure. Below are the reasons: 1. The timing belt controls the opening and closing of the valves. When it breaks, the pistons and valves may collide, causing varying degrees of damage to these internal components and affecting the engine's normal operation. 2. Timing belts are not highly durable, and breakage is common. Therefore, when a vehicle has been driven for 60,000 to 100,000 kilometers, it is advisable to promptly visit an auto repair shop to check for wear on the timing belt and replace it immediately if necessary. Most 4S shops recommend that owners replace the timing belt every 60,000 kilometers to prevent unexpected accidents.
5
4
Share

What does the curb weight of a car mean?

Car curb weight refers to the empty weight of the vehicle when it leaves the factory. The curb weight includes the weight of various tools, parts, and fluids added to the vehicle, measured without any passengers. Curb weight is not the same as the total weight of the vehicle. Below are some related explanations: 1. The total weight of a vehicle includes the curb weight, the weight of the driver and passengers, and the weight of any luggage carried in the vehicle. These combined weights make up the total weight of the vehicle. If the vehicle is equipped with additional accessories, their weight must also be included. 2. Generally speaking, for the same model, the more advanced the production process, the more optimized the design, and the higher the level of industrialization, the lower the curb weight will be. Of course, this is on the premise that the vehicle's various performance aspects, especially safety, are not compromised. The specific reason is that the use of high-strength steel and metal materials requires sufficiently advanced manufacturing technology. The more high-strength steel is used, the lower the total weight of the vehicle.
13
4
Share

Which type of car should be booked for four people on DiDi Chuxing?

For four people on DiDi Chuxing, you should book a DiDi Express car, as it can accommodate 4 passengers. The requirements for drivers and vehicles are as follows: 1. License plate requirements: The joining driver must own their own car with a local license plate. Additionally, the car must have a base price of over 70,000 RMB and be less than 8 years old. 2. Driving experience: The joining driver must hold a C1 or higher driver's license with at least 3 years of driving experience, and be between 22 and 60 years old. When joining, the driver must drive a vehicle that matches their permitted driving category. 3. Personal requirements: The joining driver must possess their ID card, vehicle registration certificate, and driver's license, have no bad records or criminal history, be in good health, capable of fulfilling their duties, and have a strong sense of responsibility.
16
1
Share

What are the body length and width of the Toyota Camry?

Camry length is 4900 mm, width is 1840 mm, height is 1455 mm, wheelbase is 2825 mm, these are the data for the sport version. The regular version has a length of 4885 mm, width of 1840 mm, height of 1455 mm, and wheelbase of 2825 mm. The following is a related introduction about the Camry: 1. In terms of appearance, the Camry has launched two styles, namely the luxury version and the sport version dual design. Both design styles originate from Toyota's latest Keen-Look design language. Comparatively, the sport version's car appearance is more aesthetically pleasing. The luxury version's front face adopts a trapezoidal horizontal bar grille design, the body design is streamlined, the car's waistline is lower, and the extended rear part of the roof increases rear headroom. 2. In terms of interior space, the eighth-generation Camry has increased its length by 35mm, width by 15mm, and wheelbase by 50mm.
5
0
Share

Can Rear Drum Brakes Modified to Disc Brakes Pass Annual Inspection?

Generally, changing drum brakes to disc brakes does not affect the annual vehicle inspection as long as it is registered with the vehicle management office. As long as the braking system functions properly during the inspection, it can pass smoothly. Typically, modifications like changing the paint color, full-body decals, body modifications, or license plate damage are the main concerns that might fail the inspection. Below is related content: 1. Reasons not recommended to change drum brakes to disc brakes: The conversion requires replacing many components, which can be costly. Additionally, the braking system is crucial, and modifications might affect the vehicle's warranty. 2. Differences between drum brakes and disc brakes: Disc brakes, also known as hydraulic brakes or oil brakes, use friction between the brake pads and the disc to slow down. Drum brakes, a traditional braking method, use friction between the brake shoes and the drum. Most vehicles on the market use disc brakes for the front wheels and drum brakes for the rear, commonly referred to as the 'front disc rear drum' configuration.
7
3
Share

What are the speed limits for two-lane and three-lane highways in Subject One?

For roads with 2 lanes in the same direction, the minimum speed limit for the left lane is 100 kilometers per hour; for roads with 3 or more lanes in the same direction, the minimum speed limit for the leftmost lane is 110 kilometers per hour, the middle lane is 90 kilometers per hour, and the rightmost lane is 60 kilometers per hour. Below is relevant information about lanes: 1. Highways: The average speed on highways is above 80 kilometers per hour, with a maximum speed of 120 kilometers per hour, which is 60% to 70% higher than on ordinary roads. Highways must indicate the speed limits for each lane, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. 2. Vehicle speed limits: On highways, the maximum speed for small passenger vehicles must not exceed 120 kilometers per hour, for other motor vehicles it must not exceed 100 kilometers per hour, and for motorcycles it must not exceed 80 kilometers per hour.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.