What is the installation method for the classic Focus wiper?

1 Answers
MichaelAnn
07/29/25 4:35pm
classic Focus wiper installation method is: 1. Lift the wiper of the classic Focus vehicle, rotate the wiper 90 degrees and keep it stable; 2. Find the plastic plug on the wiper of the classic Focus vehicle; 3. Press the plug on the wiper of the classic Focus vehicle and install the wiper that needs to be replaced. The wiper is a sheet-like structure installed in front of the windshield, which consists of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The wiper is a device used to brush off raindrops and dust attached to the vehicle's windshield to improve the driver's visibility and increase driving safety.
Was this review help?
11
4
Share
More Forum Discussions

What is the S gear on an automatic transmission car?

The S gear on an automatic transmission car is the sports mode of the vehicle. In S gear sports mode, the transmission can freely switch gears, allowing the engine to output greater power and achieve higher acceleration. An automatic transmission means that the driver does not need to manually shift gears; the vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. The principle of an automatic transmission is to use a planetary gear mechanism for shifting, which can automatically change gears based on the degree of the accelerator pedal and changes in vehicle speed. Situations where the S gear should not be used include: 1. Using the S gear when the car is just starting can have a counterproductive effect on speed increase; 2. It should not be used during high-speed cruising.
16
4
Share

Is the engine of the Trumpchi M6 domestically produced?

The engine of the Trumpchi M6 is domestically produced. An engine is a machine that can convert one form of energy into another, usually transforming chemical energy into mechanical energy. Taking the 2021 Trumpchi M6 as an example, its body dimensions are: length 4780mm, width 1837mm, height 1730mm, with a wheelbase of 2810mm and a fuel tank capacity of 52 liters. The 2021 Trumpchi M6 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 265Nm. It is paired with a 6-speed manual transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is torsion beam non-independent suspension.
13
4
Share

Where is the keyhole of the Haval H2?

The keyhole of the Haval H2 is located under the cover on the right side of the handle. Simply pull it open to see it. Taking the 2018 Haval H2 as an example, its body dimensions are: length 4365mm, width 1814mm, height 1710mm, wheelbase 2560mm, fuel tank capacity 50L, and it features a 5-door, 5-seat SUV body structure. The 2018 Haval H2 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 210Nm. It is paired with a 6-speed manual transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
11
1
Share

What Causes the Engine Malfunction Light to Illuminate and the Car to Fail to Start?

Engine malfunction light illuminating and the car failing to start can be caused by: 1. Poor quality or substandard gasoline; 2. Oxygen sensor malfunction; 3. Air flow sensor malfunction; 4. Spark plug carbon buildup or engine knocking. Solutions for the engine indicator light include: 1. Using high-quality gasoline; 2. Warming up the engine for one to two minutes before driving; 3. Reading the fault codes to identify and repair the issue. An engine is a machine that converts one form of energy into another, typically transforming chemical energy into mechanical energy. The engine malfunction light is one type of warning light; other engine-related warning lights include: 1. Oil pressure indicator; 2. Fuel indicator; 3. Battery indicator; 4. Coolant temperature indicator.
12
5
Share

What is the fuel tank capacity of the Trumpchi GS4 in liters?

The fuel tank capacity of the Trumpchi GS4 is 55 liters, as officially announced. The recommended fuel grade for the Trumpchi GS4 is 92 octane, with a fuel consumption of 6.8L per 100 kilometers. A full tank can provide a driving range of approximately 809km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to accommodate fuel expansion due to temperature increases, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
4
3
Share

Where is the location of the car foot brake?

The car foot brake is located on the left side. The operation method of the foot brake is: 1. Press the pedal all the way down with your left foot to activate it; 2. Press it again firmly with your left foot and then release to disengage the parking brake. The foot brake refers to the foot-operated parking brake, which consists of ventilated disc brakes on the front wheels and lead-lined drum brakes with automatic adjusters on the rear wheels. It is mainly used in the braking system of vehicles. The components of the car foot brake include the pedal, master cylinder, vacuum pump, oil pipe, wheel cylinder, brake pads, brake disc, and ABS pump. Its function is to decelerate the vehicle while driving or to prevent the vehicle from rolling after stopping.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.