What is the installation direction of the air conditioning filter?

1 Answers
DiNolan
07/25/25 12:59pm
The installation direction of the air conditioning filter is to have the side with two clips facing outward and the side with three clips facing inward. The function of the air conditioning filter is to block and absorb various harmful substances in the air, reducing allergic irritation to passengers inside the vehicle. If the air conditioning filter is not replaced regularly, bacteria can easily breed and be discharged into the car interior through the ducts, which is harmful to human health. The replacement cycle of the car air conditioning filter depends on individual driving conditions, external environment, and seasonal climate. Generally, for urban household cars, it should be replaced every 10,000 to 20,000 kilometers or about once a year. If the driving environment is poor with more dust, the air conditioning filter tends to get dirty faster, and the replacement cycle should be appropriately shortened. Additionally, the frequency of air conditioning use varies in different seasons, so the replacement cycle also differs. In summer and autumn, when air conditioning is used less frequently, the replacement cycle can be slightly longer.
Was this review help?
18
4
Share
More Forum Discussions

What to Do If the Car Brake Disc Rusts?

Methods to remove rust from car brake discs are as follows: 1. If the rust is not severe, you can step on the brake a few times on a safe road section without affecting public traffic. 2. If the rust is severe, it is recommended to go to an auto repair shop and use sandpaper to polish it off. Methods to determine whether the brake disc needs to be replaced are as follows: 1. The brake pads and brake disc wear relatively. After replacing the brake pads 2 to 3 times, pay attention to checking the brake disc. 2. If you hear a rustling sound when braking, check whether the brake disc needs to be replaced. 3. If grooves or small pits appear on the brake disc and the measured depth reaches about 1.5mm, you need to go to a repair shop or 4S shop to check the brake disc.
2
4
Share

What are the differences between the Tharu and the Magotan?

The Tharu and the Magotan have different vehicle positioning. The Magotan is a mid-size sedan, while the Tharu is a compact SUV. Generally, if you have business needs, you might consider purchasing the Magotan; if you're a young person pursuing fashion, the Tharu could be a better choice. Below are the details about these two models: 1. About the Magotan: The Magotan is a mid-size sedan produced by FAW-Volkswagen, with body dimensions of 4866*1832*1462mm and a price range of 186,100 RMB to 309,100 RMB. In terms of power, the Magotan is equipped with a 1.4L turbocharged engine and a 2.0L turbocharged engine. The 1.4L version delivers a maximum horsepower of 150, while the 2.0L version offers 220 horsepower. For the transmission, the Magotan uses a 7-speed dual-clutch transmission across all variants. 2. About the Tharu: The Tharu is a compact SUV produced by SAIC Volkswagen, with body dimensions of 4453*1841*1632mm and a price range of 165,800 RMB to 223,800 RMB. In terms of power, the Tharu offers a choice between a 1.4L turbocharged engine and a 2.0L turbocharged engine, sharing the same powertrain as the Magotan. For the transmission, the Tharu also uses a 7-speed dual-clutch transmission across all variants.
19
3
Share

What Maintenance Should Be Done After a Car Reaches 100,000 Kilometers?

The maintenance required after a car reaches 100,000 kilometers is as follows: 1. Replace transmission fluid and filter. 2. Replace brake pads and belts. 3. Replace spark plugs, engine oil, air filter, fuel filter, and oil filter. 4. Replace cabin air filter. The purposes of car maintenance are as follows: 1. Keep the car clean and ensure normal technical conditions. 2. Eliminate potential hazards and prevent failures. 3. Slow down the deterioration process of components and extend their service life. Precautions for car maintenance are as follows: 1. Avoid running the engine for long periods in an unventilated garage. 2. Avoid sucking on fuel pipes with your mouth. 3. Avoid getting carburetor cleaner on the car body.
17
0
Share

How Long to Charge a Dead Car Battery?

When a car battery is dead, theoretically it takes about 20 hours to charge using a portable charger, and over 5 hours when charging by running the engine (with the engine speed exceeding 2000 RPM and not idling). The method for replacing a car battery is as follows: 1. Loosen the negative terminal nut, disconnect the negative terminal. Use a wrench or hex socket to loosen the negative terminal's fastening nut, then gently pry open the fastening block with a flat-head screwdriver to remove the negative terminal. 2. Disconnect the positive terminal using the same method. 3. Remove the locking strap by loosening the nut securing the battery's locking strap, then release the strap to remove the battery. 4. Install the new battery using the same method, but follow the "positive terminal first, negative terminal last" sequence during installation.
18
1
Share

Where is the water tank located on the Baojun 730?

The water tank is located at the frontmost part of the engine compartment, near the position of the intake grille, which is where the antifreeze is added each time. The car water tank, also known as the radiator, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket for circulation, achieving temperature regulation. Information about the car water tank is as follows: 1. The water tank is a crucial part of a water-cooled engine. As an important component of the cooling circuit of a water-cooled engine, it can absorb heat from the cylinder block and prevent the engine from overheating. 2. When the engine's water temperature is high, the water pump circulates water repeatedly to lower the engine's temperature, thereby protecting the engine. In winter, if the water temperature is too low, the water circulation will stop to prevent the engine from becoming too cold. 3. The car water tank is mainly composed of the radiator core, water pipes, cooling fins, upper tank, and lower tank.
11
4
Share

How to Adjust the Seats in an Audi Q5?

Audi Q5 driver's seat adjustment is located on the left side of the seat cushion, with three adjustment functions: seat position, backrest, and lumbar support. Specific operations are as follows: 1. Audi Q5 Front Seat Adjustment: ① Press the lumbar support button to adjust the angle of the lumbar support. ② Move the switch forward or backward to control the seat's forward or backward movement. Lift or press down to adjust the seat height. ③ Move the backrest switch forward or backward to adjust the backrest angle. 2. Audi Q5 Rear Seat Adjustment: ① Backrest Inclination Adjustment: Lift the lever switch, then manually adjust the seat backrest forward or backward to the desired position, and release the switch to lock it. ② Front and Rear Position Adjustment: Pull the fixing bow upward, move the seat forward or backward to the desired position, release the fixing bow, and continue moving the seat until the mechanism engages. 3. Audi Q5 Front Seat Headrest Adjustment: ① Hold both sides of the headrest firmly, push forward or pull upward until it clicks into the desired position. ② Press the side button, move downward/backward to lower/move back the angle, then release the button after adjustment. 4. Audi Q5 Rear Seat Headrest Adjustment: ① Simply pull the headrest upward manually to raise it. ② To lower the headrest, press the button and move the headrest downward.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.