What is the indicator light for unstable tire pressure?

1 Answers
SanAndres
07/30/25 1:41am
If the tire pressure is unstable, the tire pressure monitoring warning light on the dashboard will illuminate. This warning light is a tire symbol with an exclamation mark inside. Tires are the only part of the car that comes into contact with the ground. They are crucial for the vehicle's driving stability and safety, and tire pressure is vital for tires. Tire pressure should not be too high or too low. If the pressure is too low, it can cause wave-like deformation during high-speed driving, increasing the probability of punctures. If the tire pressure is too high, it reduces the contact area between the tire and the ground, thereby decreasing grip and affecting the car's handling and driving stability. It is recommended that drivers regularly check their car's tire pressure during normal use. Tire pressure reset method: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "beep," then release it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset.
Was this review help?
16
3
Share
More Forum Discussions

What are the reasons and solutions for a car air conditioner not starting?

Car air conditioner not starting is mainly a symptom of issues with the air conditioning system and compressor. The following are detailed reasons and solutions for a car air conditioner not starting: 1. Circuit system failure: Short circuit or open circuit in the circuit directly loses the path for power transmission, preventing the electromagnetic clutch from properly regulating the compressor's working state. Solution: Use a multimeter to test the circuit segment by segment, locate the fault point, and repair it. 2. Lack of refrigerant: Refrigerant and refrigeration oil are mutually soluble, circulating back to the compressor through the system. If the Freon in the refrigerant is depleted, it will affect the refrigeration oil, leading to insufficient oil return, reducing the compressor's lubrication effect and causing it to jam or damage. Solution: Refill the refrigerant. 3. Compressor mechanical wear: Long-term operation under high-speed rotation load may cause premature mechanical wear of compressor components, rendering them inoperable. Solution: Inspect the compressor and replace worn parts. 4. The air conditioner has not been cleaned or maintained for a long time. Solution: Clean the air conditioner promptly.
11
1
Share

Why does the Haval F7 seat belt keep beeping?

Haval F7 seat belt keeps beeping for the following reasons: 1. Because the seat belt is not properly fastened, the beeping sound will only automatically turn off after the buckle is inserted; 2. If the beeping sound still does not turn off, it may be due to a faulty plug or sensor, and it is recommended to have it inspected at a 4S shop. Here is a related introduction to the Haval F7: 1. In terms of appearance, the Haval F7 adopts the space technology aesthetic design language, with the grille upgraded to a shield shape and a new golden color added, offering excellent texture and representing the most trendy design. The aggressive hexagonal matte-finished grille frame combined with the honeycomb mesh gives the entire front face a very simple, sharp, and futuristic design language. The floating spoiler has a novel and unique shape. 2. In terms of interior, the Haval F7 continues with the circular smart cockpit design, adding a gray-black interior to meet customers' diverse needs. The seat back features a unique "F" logo, providing a greater sense of recognition and exclusivity.
11
0
Share

Why Shouldn't You Mess with the Blue Badge Volvo?

Although Volvo models with the "small blue badge" may look similar to regular Volvo models, those with the "small blue badge" are definitely not to be trifled with. While they may not have a price tag in the millions, these are Volvo's Polestar (performance edition) models, some of which are even limited-edition releases. Needless to say, these models are more expensive than standard Volvo versions and boast higher performance. This "small blue badge" is also a symbol of prestigious status within the Volvo family. Additional Information: 1. Currently, the Polestar series high-performance models are equipped with a 3.0T six-cylinder turbocharged engine tuned by the Polestar division, delivering a maximum output of 257 kW (350 PS) and a peak torque of 500 Nm, paired with a 6AT transmission. A Volvo representative revealed that the future 2.0T engine replacement will match the power output of the current 3.0T engine. 2. Additionally, the current Polestar series high-performance lineup includes the V60-Polestar and S60-Polestar models, with plans to introduce the V40-Polestar and XC60 Polestar editions for consumers in the future.
17
2
Share

What does anti-lag system mean in cars?

Anti-lag system refers to the anti-lag ignition system. Here is more information about anti-lag: 1. Anti-lag is an electronic device used in rally racing or drag racing, with the basic function of reducing turbo lag. 2. The working principle of anti-lag involves forcibly injecting fuel into the cylinder without ignition, then igniting it when the exhaust valve opens after compression to expel the exhaust gases and maintain the turbocharger's speed, thereby reducing turbo lag. 3. Anti-lag stops the ignition process during throttle-off gear shifts, intentionally allowing the fuel-air mixture to enter the exhaust manifold after the exhaust valve opens. The extremely high temperature in the manifold causes immediate combustion upon contact, and the powerful explosion pressure drives the turbocharger's exhaust turbine, keeping the compressor turbine spinning at high speed to maintain boost pressure. This ensures boost effect even during low-speed driving or gear shifts. 4. The main purpose of using anti-lag is to keep the turbocharger operating normally when the engine does not require power output but still needs substantial air intake, especially during cornering in turbocharged racing cars when reducing power, so that it can respond quickly when power output is needed.
1
4
Share

What is the method to reset the maintenance light on a Mercedes-Benz E260?

Solution to reset the maintenance light on a Mercedes-Benz E260: 1. First, close the engine hood. Open the engine hood to a vertical position, then close it again. Ensure all doors and the trunk lid are closed. Insert the key into the ignition switch and turn it to the first position. Use the up and down page buttons on the left side of the steering wheel to navigate to the "Odometer" (i.e., display the total mileage) on the multifunction display. 2. Next, use the left and right page buttons to navigate to the "Trip" option, which will be displayed for 5 seconds. Press and hold the "Answer Call" button, then within 1 second, press and hold the "OK" button, and keep both pressed for 5 seconds. The multifunction display will show the workshop menu with options such as "Vehicle Data," "Roller Test," and "ASSYST PLUS." Select "ASSYST PLUS" and confirm by pressing the "OK" button. 3. Finally, the multifunction display will show options like "Service Data" and "Full Service." Confirm the relevant maintenance data.
2
3
Share

Where is the air conditioning filter of the new Peugeot 308 located?

The air conditioning filter of the new Peugeot 308 is located in the engine compartment, above the right front wheel. Be cautious of the working area's temperature to avoid burns from high heat. Steps to replace the air conditioning filter: 1. First, remove the soundproofing cotton. You can use a flat-head screwdriver to pry open the clips and take out the soundproofing cotton; 2. Open the cover of the air conditioning filter, pull out the old filter, and install the new one; 3. Replace the cover and restore the soundproofing cotton. The clips can be snapped back into place by hand. The new Peugeot 308 is a compact sedan under the Peugeot brand. This model is equipped with three types of engines: a low-power version 1.2-liter turbocharged engine, a high-power version 1.2-liter turbocharged engine, and a 1.6-liter naturally aspirated engine. Its front suspension uses a MacPherson independent suspension, and the rear suspension employs a torsion beam non-independent suspension.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.