What is the indicator for low coolant?

1 Answers
AylaLee
07/25/25 10:21am
The indicator for low coolant is a small sailboat-like symbol on the dashboard. The functions of automotive coolant are: 1. To provide anti-corrosion protection for the engine's cooling system; 2. To prevent the engine water from boiling when the temperature reaches 100 degrees Celsius; 3. To prevent the formation of scale, which can reduce the radiator's cooling efficiency; 4. To ensure the engine operates properly in low temperatures. The method for replacing coolant is: 1. Open the vehicle's engine hood, and the coolant reservoir can be seen in the upper right corner; 2. Open the coolant drain plug under the radiator to drain the old coolant; 3. Add new coolant, tighten the cap, and the coolant replacement is complete.
Was this review help?
6
1
Share
More Forum Discussions

Which line should be aligned for reverse parking?

Between the second and third lines. Here are detailed explanations about the three lines in reverse parking: 1. Green line: In the reversing camera display, if objects haven't entered the green zone, it indicates there's still ample space for reversing, allowing confident reversing. 2. Yellow line: When objects enter the yellow zone during reversing, it means you should slow down as the distance between the vehicle and objects is about one meter. 3. Red line: The red line is closest to the rear of the vehicle. When objects enter the red zone, you must stop immediately as the distance between objects and the rear bumper is only 30cm at this point.
5
2
Share

What does 'ETC without tag' mean?

ETC without tag means the ETC electronic tag is invalid. Since ETC is designed for dedicated vehicle use, it has a protective interlock installed during setup - specifically the button at the back. If this button is triggered twice consecutively, it will cause the ETC electronic tag to become invalid. ETC stands for Electronic Toll Collection system, where ETC-exclusive lanes are designated for vehicles equipped with ETC onboard units, utilizing electronic payment methods. The ETC system works through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna at the toll station's ETC lane. This system employs computer networking technology to process backend settlements with banks, achieving the purpose of allowing vehicles to pass through toll stations without stopping while paying toll fees.
15
2
Share

How to Clean the Gaps in Car Windows?

Methods for cleaning the gaps in car windows: 1. Find a thin metal sheet of suitable size and wrap it with a dry cloth; 2. Insert the cloth-wrapped metal sheet into the gap of the car window and gently push it from front to back. When the cloth gets dirty, switch to a clean side to wrap the metal sheet and repeat the process until no visible dust remains on the cloth. Precautions: Do not use excessive force during cleaning to avoid damaging the sealing rubber strip. The dust in the gaps of car windows is an area that cannot be cleaned during regular car washing. If the gaps are filled with dust, the dust will stick to the windows when raising or lowering them, leaving unsightly marks. Therefore, car owners should clean these gaps frequently.
11
5
Share

How to Route the Wiring for Installing a Rearview Camera?

Methods for routing the wiring when installing a rearview camera: 1. Route the power cable of the recorder to the car charger, and lead the camera cable from the rear seat to the back of the vehicle; 2. Use a screwdriver to remove the plastic panel of the car's trunk; 3. Choose a suitable position to fix the rear camera, and connect the camera's cable to the positive terminal of the taillight. During the connection process, try to use concealed wiring as much as possible and avoid exposed wiring to prevent inconvenience during vehicle use. The rearview camera, also known as a parking assist system, or a reversing visual system, or an onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance.
13
0
Share

How to Adjust the Seat Height of the Volkswagen Tayron?

Method to adjust the seat height of the Volkswagen Tayron: Simply press the lumbar support adjustment button to raise or lower the lumbar support area of the seat. Lift or press the seat cushion adjustment switch to raise or lower the seat cushion height. Moving the switch forward or backward allows the seat to move forward or backward. The backrest tilt angle can be adjusted by pulling forward or backward—pushing forward tilts it forward, while pulling backward tilts it backward. In terms of powertrain, the Volkswagen Tayron is equipped with a turbocharged engine, delivering a maximum horsepower of 150 hp, a maximum torque of 250 Nm, and a maximum power output of 110 kW. The maximum torque range is between 1,750 and 3,000 rpm, while the maximum power range is between 5,000 and 6,000 rpm.
11
3
Share

How to Adjust the Time on a 2012 Ford Focus?

Method to adjust the time on a 2012 Ford Focus: 1. Turn the ignition switch to the ON position; 2. There is a small knob on top of the light adjustment lever, turn it to the menu button; 3. Press the SET button, continue adjusting the knob until the indicator bar displays CLOCK; 4. Use the adjuster to set the year up or down, after setting the year, press the SET key to proceed to adjust the month, then adjust the hour and minute in sequence. The Ford Focus is a Ford A-segment family car with dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, and a wheelbase of 2705mm. In terms of suspension, the Focus features a MacPherson strut front suspension and a torsion beam rear suspension.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.