What is the idle speed of an automatic transmission?

How to Solve Uneven Tire Wear on Cars?

Solutions for uneven tire wear on cars: 1. Perform wheel alignment: Inaccurate wheel alignment, such as incorrect toe adjustment, can cause uneven tire wear. The front wheels tilt slightly inward at an angle similar to pigeon toes. If the angle is too large or improperly adjusted, uneven tire wear will occur. In this case, wheel alignment is needed to solve the problem. 2. Adjust tire pressure: Excessive tire pressure not only affects ride comfort but also causes the middle of the tire to wear unevenly. On the other hand, insufficient tire pressure can damage the tire, even the wheel hub, and lead to uneven wear on both sides of the tire. Therefore, it is necessary to adjust the tire pressure according to the manufacturer's recommended value. Additionally, to reduce uneven tire wear caused by abnormal tire pressure, check the tire pressure at least once a month. 3. Replace old tires: When tires are severely worn, replacing only one or two tires will result in different friction levels among the four tires, which can also cause uneven wear. 4. Replace high-quality wheel hubs: When a wheel hub is deformed, it can also lead to uneven tire wear, and the hub should be replaced. The cause of hub deformation may be continued driving with insufficient tire pressure. 5. Replace rubber bushings: If all tires show regular wear on the same side, it indicates that the thrust rod rubber bushing is damaged and needs to be replaced.

12

5

Share

Can the engine be directly washed with water?

Yes, but it is not recommended to wash the engine directly with water. Specific measures: 1. Use a damp cloth to clean dust and oil stains on the engine surface as much as possible, while removing leaves and other debris inside the engine compartment to keep it tidy. 2. Try to avoid washing the engine with water. For an engine compartment that has not been cleaned for a long time and is particularly dirty, it is best to seal various electrical components in the engine compartment. Precautions for cleaning a car engine are as follows: 1. Water pressure should not be too high: Since there are various wires and electronic components in the engine compartment, if the water pressure is too high, slightly damaged wires can cause a short circuit, which may burn out the fuse in minor cases or even destroy the entire circuit board in severe cases, with very serious consequences. 2. Avoid washing with water when the engine is hot: Cleaning the engine when it is at a high temperature may cause the engine to suddenly cool down, which could lead to cylinder deformation or cracking in severe cases. Moreover, washing at high temperatures can produce a large amount of steam, which may affect the circuits. 3. Take waterproof measures: New cars' engines and circuits have good waterproof functions, so they can be washed directly with water. For vehicles older than three years, do not use a water gun for washing; instead, use a wet cloth for cleaning, and avoid washing the circuits directly, taking appropriate waterproof measures.

11

1

Share

The Model of Low Beam Light for Jingyi X3

Jingyi X3 uses H712V55W halogen bulbs for its low beam lights. To significantly improve the overall lighting effect of halogen lights, the only options are to replace them with xenon bulbs or LED bulbs. When installing the bulbs, remember to wear gloves and avoid touching the glass part with bare hands. Otherwise, fingerprints will be left on the bulb's glass surface. If accidentally touched, clean it with a dry towel or, if necessary, use alcohol for thorough cleaning. The Jingyi X3 features a sporty and stylish design that caters to the aesthetic preferences of today's youth. Its overall appearance is fashionable and lively, accentuated by elements such as an all-black grille, eagle-eye-shaped headlights, roof racks, and off-road skid plates, presenting consumers with a dynamic and appealing vehicle.

16

3

Share

What Details Should You Pay Attention to When Buying a Car?

Precautions for buying a car: 1. Be wary of various discounts. 2. Only visit a 4S store if you have a target model in mind. 3. Pay attention to contract details. 4. Choose a suitable price range. Precautions for picking up the car: 1. Visually inspect the car body paint for scratches, spots, dents, and wear. Check for color differences under sufficient sunlight, and open the doors to examine the sheet metal from different angles for smoothness and signs of repair. 2. Check the vehicle's nameplate, located on the driver's side door or in the engine compartment, to ensure the manufacturing date is not too far in the past. Generally, if it exceeds six months, the car might be a stock or demo vehicle. Also, verify that the nameplate information matches the vehicle certification. 3. Inspect the windshield. 4. Open the engine hood to check for cleanliness. If the car has been stored or used for a long time, some areas may show dust or stains. Also, check the engine oil level and other fluid levels. 5. Examine the doors for smooth operation, absence of noise when opening or closing, even gaps between doors and bumpers, and proper door closure. 6. Check the tire manufacturing date, as tires are sourced separately and their dates differ from the car's production date. 7. Sit inside the car to check for strong odors, damaged or heavily stained interiors. 8. Test basic vehicle functions. 9. Test-drive the car, if possible, and observe the engine if allowed to start.

19

2

Share

What brand is the Jialing Coco engine?

The Jialing Coco engine is a Honda brand. The Jialing CoCo is equipped with a single-cylinder engine with an actual displacement of 107CC, paired with a Delphi fuel injection system, which also complies with the current National 4 emission standards. The maximum power of this engine is 5.2kW, which is considered quite good for its class when paired with a 4-speed cycle, making it fully capable of meeting daily commuting needs. Additionally, this engine retains the kick starter, maintaining the classic retro charm of the 70s and 80s, and it can also be started with the kick starter in case the battery runs out of power. The wheels of this bike also feature chrome-plated wire-spoke rims, and the braking system uses the more classic drum brakes.

1

3

Share

What does it mean when the EA888 engine reports a too rich system in cylinder 1?

Reasons for the EA888 engine reporting a too rich system in cylinder 1: 1. Issues with the air flow sensor. 2. Not all air passing through the air flow sensor enters the cylinder, some leaks outside the closed system. 3. Damage to the control unit. Below is an introduction to the EA888 engine: 1. The EA888 is a large series with many different engine models, such as CWN, DKU, DKW, etc. The 330TSI engine is the EA888 third-generation B (commonly known as 3.5 generation) engine, while the 380TSI engine is the EA888 third-generation engine. The 3.5 generation engine is superior to the 3rd generation engine, meaning the 2.0T low-power engine is better than the 2.0T high-power engine. 2. The internal forging of the 2.0T low-power engine is different, leading to variations in the strength of certain engine components, such as the crankshaft. The 330TSI is equipped with a 2.0T inline 4-cylinder turbocharged low-power engine, paired with a 7-speed dual-clutch transmission, delivering a maximum power of 137KW and maximum torque of 320N·m. The 380TSI is equipped with a 2.0T inline 4-cylinder turbocharged high-power engine, also paired with a 7-speed dual-clutch transmission, delivering a maximum power of 162KW and maximum torque of 350N·m.

9

3

Share

What is the idle speed of an automatic transmission?

How to Solve Uneven Tire Wear on Cars?

Can the engine be directly washed with water?

The Model of Low Beam Light for Jingyi X3

What Details Should You Pay Attention to When Buying a Car?

What brand is the Jialing Coco engine?

What does it mean when the EA888 engine reports a too rich system in cylinder 1?

What is the function of the high-pressure fuel pump?

What Causes a Car Radiator to Boil Over? How to Handle It?

What is the best engine oil for Toyota Crown?

What is the abbreviation for Hong Kong license plates?