What is the ideal wattage for car LED headlights?

1 Answers
VanRose
07/29/25 6:00pm
Car LED headlights with 70 to 90W are most suitable. The maintenance tips for car LED headlights are as follows: Check the sealing of the headlights: If moisture invades the headlights, the lifespan of the bulbs may be shortened. Therefore, the sealing characteristics of the headlights should be checked. If the sealing ring between the lens and reflector is found to be damaged, it should be replaced immediately. Clean the reflector: For semi-sealed headlights, if the reflector turns black and the brightness decreases, it needs to be replaced. If there is only dust and stains on the reflector, cleaning may suffice without replacement. For reflectors that cannot be completely cleaned by blowing, anhydrous ethanol can be used for wiping. If the reflector is gold-plated or aluminum-plated, it can be wiped with clean water. Adjust the direction of the light beam: During driving, the direction of the light beam may shift due to vehicle vibrations. Therefore, it is necessary to check the direction of the headlight beam during annual inspections. During regular maintenance, professional technicians may also need to periodically inspect and adjust the beam direction.
Was this review help?
19
1
Share
More Forum Discussions

How long after a car loan default will the vehicle be remotely locked?

Time is around 10 to 30 days. Here are the details: Remote locking time: Different banks or loan companies have different regulations regarding loan defaults. After a car loan default, staff will contact the vehicle owner. Only if communication proves ineffective will the vehicle be remotely locked. Loan repayment: After the car loan is fully repaid, you need to bring the vehicle registration certificate, vehicle license, and the owner's ID card to the vehicle management office where the vehicle is registered, or the traffic management department of the public security authority, to complete the mortgage release procedures. Only after completing these procedures does the vehicle fully belong to the owner.
17
0
Share

Can the car window be opened when the car falls into water?

The car window cannot be opened due to the excessive water pressure at this time. Below is an introduction to water-damaged vehicles: The specific definition of a water-damaged vehicle: Water begins to accumulate in the vehicle, and internal components are damaged due to the water. Water-damaged vehicles are classified into different water submersion levels. Classification of water submersion levels for water-damaged vehicles: Level 1 - water just reaches the vehicle chassis; Level 2 - water reaches half of the wheels; Level 3 - water almost completely submerges the tires; Level 4 - water reaches the engine hood; Level 5 - water completely submerges the engine hood; Level 6 - water submerges the roof.
3
3
Share

Does the Cayenne have a plug-in hybrid version?

The Cayenne does have a plug-in hybrid version. Taking the 2020 Cayenne as an example, its body dimensions are: length 4918mm, width 1983mm, height 1696mm, with a wheelbase of 2895mm. It has a fuel tank capacity of 90 liters and a luggage compartment capacity ranging from 772 to 1708 liters. The curb weight is 2020kg. The 2020 Cayenne is equipped with a 2.9T twin-turbocharged engine, delivering a maximum power of 324kW and a maximum torque of 550Nm. It is paired with an 8-speed automatic transmission. The vehicle features multi-link independent suspension systems for both front and rear.
9
1
Share

Why does the car have power for the lights but won't start?

When the car lights have power but the engine won't start, it could be due to incorrect gear position; steering wheel lock; key fob battery depletion; or spark plug blockage. Here's relevant information about spark plugs: Function: Commonly known as ignition plugs, spark plugs function by discharging high-voltage pulses from the ignition cables, creating an electric arc that jumps across the gap between the two electrodes to ignite the air-fuel mixture in the cylinder. Main types: Primarily includes standard spark plugs, extended insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs. Working in coordination with the ignition system and fuel supply system, spark plugs significantly influence overall engine performance.
13
1
Share

What does the issuance of vehicle registration certificate mean?

Vehicle registration certificate issuance refers to the process of verifying vehicle information and then issuing a valid certification. Below is an introduction to the relevant content: Issuance location and registration location vehicle management office: The issuance location vehicle management office is where the driver's license is obtained, while the registration location vehicle management office refers to the local administrative office in the jurisdiction where the vehicle was purchased. Vehicle management office: The vehicle management office is a direct institution under the public security system. It is generally established in county-level or higher administrative regions. It is responsible for handling the application, renewal, and review of motor vehicle driver's licenses, driver's file management, as well as the registration, transfer, modification, inspection of motor vehicles, issuance of motor vehicle license plates, and motor vehicle file management.
9
2
Share

Does Black Roof Film Need Registration?

Black roof film does not require registration. Below are the reasons for bubbles appearing in car film: Quality Issues: The quality of the car film itself. When purchasing car film, choose products that meet quality standards. Substandard products often experience issues like adhesive failure, bubbling, and fading. Installation Issues: The quality of car film installation service. Before applying the film, thorough dust removal and cleaning must be done. If there is dust on the car body or film, bubbles will appear after application. Dust and Impurities: Inadequate cleaning of the glass surface, leaving dust attached. As the adhesive strength of the film increases, pressure builds around sand particles or dust, causing bubbling.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.