What is the ideal distance between the car and the garage when reversing into a parking space?

1 Answers
JohnDella
07/28/25 5:18pm
The optimal distance between the car and the garage corner when reversing into a parking space is 30cm. This is because there may be errors when observing the distance between the car body and the garage corner through the rearview mirror during the reversing process. A 30cm distance helps avoid scratches caused by such errors. Tips for reversing into a parking space: Learn to determine if the parking space is suitable; use the rearview mirror to observe the garage boundary lines and decide the steering wheel angle when reversing; leave extra space when parking side by side. Precautions for reversing into a parking space: Be aware of vehicle blind spots: Most accidents during reversing are caused by vehicle blind spots, including typical incidents like hitting or running over children. Therefore, drivers should constantly observe their surroundings during reversing, and pedestrians should also be cautious and avoid the vehicle. Do not rely too much on electronic assistance devices when reversing: Electronic aids like parking sensors also have blind spots. If you rely solely on these devices without actually observing the surroundings with your eyes, accidents can easily occur. These devices are only supplementary and should not be fully relied upon.
Was this review help?
17
0
Share
More Forum Discussions

What's the matter with smoke and a burning smell coming from the front of the car?

If there is smoke from the front of the car accompanied by a burning smell, it is recommended not to continue driving. Take the car to a repair shop or a 4S store for a detailed inspection. Smoke and a burning smell from the engine are mainly caused by excessive engine temperature, radiator failure, oil leakage, and friction of the clutch plates in the vehicle's transmission. The following are the details: 1. Excessive engine temperature: After the car is used under high-intensity overload conditions, the engine temperature will rise sharply, resulting in a large amount of white smoke and a burnt smell. In this case, the engine should be cooled down, and it should only be used again after the engine temperature returns to normal. 2. Radiator failure: If the car's radiator malfunctions, the engine will not be effectively cooled, leading to smoke. In this situation, a professional should be consulted to inspect and repair the radiator. 3. Oil leakage: Oil leakage can also cause smoke and a burning smell due to high-temperature evaporation. A comprehensive inspection is necessary in this case as well. 4. Friction of the clutch plates in the vehicle's transmission: For manual transmission models, if the accelerator is pressed hard while in a semi-engaged state, it can cause severe friction of the clutch plates, resulting in smoke and a burning smell from the engine. In this situation, it is important to drive correctly and avoid high-intensity overload usage of the vehicle.
17
4
Share

Is It Serious If Water Gets Into the Car Floor Mats?

The hazards of water getting into car floor mats are: If left untreated, even after drying, the car may retain residual odors or foster the growth of bacteria harmful to health. In fact, water getting into the floor mats is not a major hazard; the real impact is on the floor lining. Prolonged soaking may also damage the electrical components beneath the base. It is best for car owners to seek professional treatment at a 4S shop to prevent future issues. Additional information: 1. Floor lining: The layer beneath the car floor mats is called the floor lining, which is pre-installed across the entire vehicle. Once dirt or grime accumulates on it, it becomes difficult to clean. Covering it with a waterproof and easy-to-clean item makes maintenance more convenient. 2. Function: It comes in two types: hand-sewn and molded floor linings. A well-made, hand-sewn floor lining can effectively prevent dust and dirt from seeping into the carpet, but its waterproofing capability is relatively weaker. Molded floor linings are pressed into shape in a single process, with no seams in the middle, offering excellent leak-proof performance. However, they may appear less aesthetically pleasing when laid over uneven car flooring with significant bumps and dips.
16
4
Share

What are the reasons for the 14th-generation Sylphy frequently displaying start-stop system faults?

1、Causes of start-stop system faults: (1) Insufficient battery power, unable to start. (2) Engine electronic control system malfunction. (3) Faults in the internal wiring or sensors of the automatic start-stop system. (4) Throttle blockage or other faults. 2、Start-stop technology: Refers to a system where the engine automatically shuts off when the vehicle comes to a temporary stop and restarts automatically when the vehicle needs to move forward again. Simply put, it is a system that can automatically control engine shutdown and ignition, abbreviated as STT. 3、Low temperature effects: This situation occurs more frequently in winter because the battery temperature is very low when the vehicle starts. The start-stop function will not work until the battery reaches its operating temperature. Once the vehicle is fully warmed up, the automatic start-stop will resume operation. This is normal and not a cause for concern. However, if the start-stop function does not resume after the engine coolant temperature rises, it is advisable to have it checked at a repair shop.
5
0
Share

Where is the USB port on the 14th-generation Sylphy?

The USB port of the Nissan Sylphy is located in front of the gear shift lever. The Sylphy has only one USB port. If you need to install additional devices such as a dashcam or reversing camera, they should be directly connected to the cigarette lighter. The USB port provides external playback device connections for USB, AUX, and SD card slots. 1. Exterior Design: The Sylphy adopts the brand's new V-Motion 2.0 design language. Benefiting from Nissan's global CMF platform with a longer and wider chassis structure, it achieves a 1.254 luxury car width-to-height ratio and an ultra-low drag coefficient of 0.26Cd. The 1.5Gpa UHSS high-rigidity body structure ensures enhanced driving safety. 2. Riding Experience: Building on the Sylphy series' core advantage of comfort, it offers a spacious cabin and high-quality, lightweight luxury interiors, providing a delightful riding experience for the whole family. High-performance acoustic noise insulation technology and the NissanConnect intelligent system deliver a relaxed and enjoyable driving scenario.
3
2
Share

Where can I view photos of processed traffic violations?

You can view photos of processed traffic violations at local traffic violation handling offices. Here are the specific methods to check violation photos: 1. Inquiry at traffic police departments: When you need to view violation photos, bring your driver's license, ID card, and vehicle registration certificate to the traffic police department. The staff will then retrieve the violation photos for you to review. 2. Online inquiry: Currently, most electronic monitoring systems use high-definition cameras for capturing violations, so you can view high-definition violation photos at traffic police departments. You can search for the "Traffic Safety Comprehensive Service Management Platform" online to view high-definition photos of vehicle violations, or use the 12123 traffic management app to query high-definition violation photos.
15
1
Share

Is it acceptable to delay the annual vehicle inspection by one month?

Vehicle annual inspections must be completed within the stipulated time frame; otherwise, fines and penalty points will be imposed. Below are the relevant details: 1. Regulations: According to Article 47, Paragraph 4 of the "Motor Vehicle Registration Regulations," driving a motor vehicle on the road without undergoing the required periodic safety technical inspection will result in 3 penalty points, a fine of 200 yuan, and possible temporary seizure of the vehicle. 2. Vehicle Annual Inspection: Vehicle annual inspection refers to the mandatory testing required for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for the vehicle in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections help promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.