What is the icon for the interior and exterior air circulation in the Magotan?

1 Answers
LaCamille
07/30/25 7:45am
The icon for the interior and exterior air circulation in the Magotan is a small car pattern with a counterclockwise arrow in the middle. Below is the relevant introduction to the interior circulation: 1. When the outside temperature is very high or very low, you should select the manual operation mode of the interior air circulation to allow the air conditioning system to operate in this mode for a short time, quickly lowering or raising the temperature inside the car. 2. When the air conditioning system enters the automatic operation control mode of the interior air circulation, this indicator light will turn on. Fresh air from outside can still enter the car. If the concentration of harmful substances in the outside air is detected to increase, the system will immediately automatically activate the interior air circulation operation mode to prevent outside air from being drawn into the car. If both indicator lights are off, it means the air conditioning is in the exterior circulation mode.
Was this review help?
12
3
Share
More Forum Discussions

What is the symbol for China VI vehicles?

The symbol for China VI is marked as 'VI' on the vehicle's environmental protection label. Here is more information about China VI: 1. Brief Introduction: The 'China VI' emission standard is officially known as the 'National Sixth Stage Emission Standard for Light-duty Vehicles.' It is an upgraded version of the 'Limits and Measurement Methods for Emissions from Light-duty Vehicles (China V)' based on domestic conditions. 2. Implementation Phases: The 'China VI' standard is divided into two phases: China VIa and China VIb. China VIb is more stringent, while China VIa can be considered a transitional standard. China VIa was implemented on July 1, 2020, and China VIb will be implemented on July 1, 2023.
14
5
Share

Is the Passat Front-Wheel Drive or All-Wheel Drive?

The domestically produced Volkswagen Passat models are all front-wheel drive, with the exception of the imported Passat Premium edition which features all-wheel drive. Below is more information about the Volkswagen Passat: 1. The Passat is a mid-size sedan designed by Volkswagen AG in Germany. It is classified as a B-segment vehicle in Volkswagen's lineup. The Passat surpasses the standard design of mid-range sedans in terms of power performance, overall design, safety concepts, driving comfort, as well as durability and longevity. 2. The all-new SAIC Volkswagen Passat was launched on October 31, 2018. The new model adopts the latest family design, presenting a more youthful and dynamic appearance. Built on the MQB platform, it features increased body dimensions and is equipped with either a 1.4T or 2.0T engine.
19
1
Share

Does Car Air Conditioning Temperature Affect Fuel Consumption?

Whether the temperature setting of a car's air conditioning affects fuel consumption mainly depends on the type of air conditioning system in the vehicle. Using a fixed-displacement air conditioning system does not impact fuel consumption, whereas using a variable-displacement air conditioning system does. Here are the details: 1. Fixed-displacement air conditioning: Temperature settings do not affect fuel consumption. This type of air conditioning is typically found in manual transmission vehicles. Regardless of the fan speed or temperature setting, once the air conditioning is turned on, the compressor activates, but its output power remains constant, so fuel consumption stays largely unchanged. 2. Variable-displacement air conditioning: Temperature settings have a noticeable impact on fuel consumption. This type of air conditioning is usually installed in automatic transmission vehicles. It adjusts the compressor's output based on demand. The lower the temperature setting, the higher the compressor's output power, leading to increased fuel consumption.
15
2
Share

Is Car Film Applied Inside or Outside?

Car window film is applied to the inside of the glass. Here are some precautions after applying car film: Do not roll windows up or down: After applying the car film, it hasn't fully adhered to the glass yet. Avoid rolling the windows up or down for three days. Do not wash the car: Avoid washing the car for three days and do not wipe the film with hard objects. Bubbling phenomenon: On the second day after application, fogging and bubbling usually occur, which is normal. The moisture will evaporate after exposure to sunlight. Winter application: If the film is applied in winter, do not roll the windows up or down or wash the car for a week. Moisture evaporates more slowly in winter, and the front and rear windows may take a month to dry completely. The rear window heating wires should not be turned on for a month.
16
4
Share

What is the function of truck urea solution?

Urea solution for vehicles is used to reduce harmful nitrogen oxides in exhaust gases into nitrogen and water. Here is some relevant information about vehicle urea: 1. Principle: Technical means can be employed inside the engine to reduce particulate emissions, leaving mainly nitrogen oxides in the exhaust. By injecting urea into the exhaust after-treatment device, the urea decomposes into ammonia at high temperatures, which reacts with nitrogen oxides under the action of a catalyst to produce harmless nitrogen and water. This device is called the SCR (Selective Catalytic Reduction) after-treatment system. 2. Impact of not using vehicle urea: It causes environmental pollution; the chemicals in the diesel vehicle system will quickly oxidize, the urea nozzle will become clogged, and the entire system may be rendered useless; due to the OBD's torque limitation function, vehicles without urea will experience reduced power performance.
19
5
Share

Where is the fuse of Changan Eado located?

Changan Eado's fuse is located in the fuse box within the engine compartment. Automotive fuses are a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will blow within seconds to protect the circuit. They are commonly used for overcurrent protection in automotive circuits and also for overcurrent protection in industrial equipment. Below are precautions for replacing fuses: 1. Replace the fuse according to the rated current value indicated on the fuse box cover. Do not use a fuse with a higher rated current. 2. If the new fuse blows immediately, it indicates a possible fault in the circuit system, and it should be inspected and repaired as soon as possible. 3. In the absence of a spare fuse, you can replace it with a fuse from other equipment that does not affect driving and safety. 4. If a fuse with the same current load cannot be found, you can use one with a lower rated current than the original fuse.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.