···
Log in / Register

What is the i6 car?

4 Answers
DelClaire
09/04/25 3:33am

The Roewe i6 is a compact car. Below is an introduction to the Roewe i6: 1. Body dimensions: The car has a length, width, and height of 4671mm, 1835mm, and 1464mm respectively, with a wheelbase of 2715mm. 2. Powertrain: The Roewe i6 is equipped with two engines, one being a 1.6-liter naturally aspirated engine and the other a 1.5-liter naturally aspirated engine. The 1.6-liter naturally aspirated engine delivers 125 horsepower and a maximum torque of 158 Nm, with a maximum power speed of 6000 rpm and a maximum torque speed of 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. It is paired with either a 5-speed manual transmission or a CVT transmission.

Was this review help?
1
4
Share
OReese
09/16/25 4:41am

I've driven the Roewe i6 for a while, and it's a compact sedan quite suitable for family use. The spacious interior can comfortably accommodate three people in the back seat, making it practical for family trips or daily commutes. The 1.5T engine provides adequate power, with fuel consumption around 7 liters per 100 kilometers, making it fuel-efficient and agile for city driving. It offers great value for money, with a starting price just over 100,000 yuan, more affordable than comparable joint-venture models. The chassis is stable, providing a smooth ride over speed bumps, and the noise insulation is decent, though wind noise becomes noticeable at high speeds. The Roewe brand has made significant progress in recent years, offering reliable quality and affordable maintenance—regular oil and filter changes cost just a few hundred yuan. Overall, it's a cost-effective and worry-free choice.

Was this review help?
8
5
Share
Expand All
OEmersyn
10/30/25 5:16am

The i6 is a popular model from SAIC's Roewe brand. My friend just bought one and took it out for a spin, finding the handling very smooth with light steering and quick acceleration, making city driving effortless. The exterior design has a strong modern feel, with a low front end and fastback lines giving it a youthful, stylish appearance. The interior features a large touchscreen supporting CarPlay, making navigation and music operation convenient. The 1.5T engine paired with a 7-speed dual-clutch transmission delivers adequate performance for daily use, with no lack of power when overtaking on highways. As a domestic car in the 100,000-yuan price range, the interior materials are average, but it comes well-equipped with features like a rearview camera and Bluetooth connectivity. Compared to joint-venture models like the Civic, it offers obvious price advantages.

Was this review help?
12
0
Share
Expand All
MollyAnn
12/13/25 5:24am

The Roewe i6 is a domestic compact sedan produced by SAIC Roewe, primarily sold in China. It offers both gasoline and plug-in hybrid versions (such as the i6 eRX5), with a price range of 100,000 to 150,000 yuan. The vehicle measures 4698mm in length with a 2715mm wheelbase, providing decent interior space suitable for four passengers. Power options include a 1.0T or 1.5T engine, delivering around 160 horsepower, with economical fuel consumption. The chassis is tuned for comfort, making it an easy choice for daily family use.

Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to solve the problem of BMW X1 air conditioner not cooling?

First, drive with the windows open for a while to equalize the indoor and outdoor temperatures, then close the windows, turn on the air conditioner's internal circulation mode, and set it to the coldest mode with the highest fan speed. If the car air conditioner can still cool, go to a 4S shop to check if there is a lack of refrigerant (Freon). If it is lacking, Freon can be added. It is best to replace the air filter during seasonal changes and perform a cleaning of the air conditioning ducts. For air conditioning circuit issues, check whether the AC switch on the control panel is malfunctioning, whether the main unit's temperature control circuit is normal, and whether the compressor's electromagnetic coil is engaging properly.
16
5
Share

How to Match the Remote Key for Besturn B70?

Park the car and ensure all four doors are closed. Then, open and close the left front door (the main driver's side door) three times. Within three seconds, insert the key and turn it on and off five times consecutively (without starting the engine). Remove the key and press the unlock and lock buttons on the remote. You should hear a response from the remote. After the remote responds, press the unlock and lock buttons on the new remote. The car may experience remote control confusion at this point, requiring a re-matching process. Ensure all four doors are locked, insert the key, and turn it on and off five times within five seconds. Remove the key and press the unlock and lock buttons on the remote twice to complete the process.
18
2
Share

How to Reset the Maintenance Wrench Light on Buick Encore?

Turn off the ignition switch to cut off the power supply to the car. Press and hold the buttons on the dashboard simultaneously, keeping both trip reset buttons pressed for more than 5 seconds. Turn the key to the second position (accessory mode) without starting the engine, and wait until all dashboard lights illuminate. This process typically takes about 10 seconds. Wait for the wrench light to go off. Once it's off, release both trip reset buttons. Turn off the ignition switch and then turn it back on to complete the maintenance reset.
17
1
Share

How to Fix Abnormal Power Window Operation in Honda Vezel?

Open the door where the switch needs to be replaced. For most models, the power window switch area is made of plastic. Carefully examine the seam between the trim panel and door panel to locate the notch. Insert a pry tool or flat tool into the notch to lift the trim panel, then slowly remove the panel along the gap. Disconnect the power window switch connector. Flip the trim panel over, and you should see the switch secured by several cross-head screws. Remove these screws to detach the power window switch. Install the new power window switch, tighten the screws, and reconnect the connector. Test the window operation first to confirm the switch functions properly before reinstalling the trim panel.
8
2
Share

How to remove the fuel pump of Honda CRV?

Remove the rear seat of the Honda Fit vehicle, and use a flat-head screwdriver to pry open the cover plate of the Honda CRV fuel pump. Take off the cover plate of the Honda CRV fuel pump and unplug the connector of the Honda CRV fuel pump. Disconnect the fuel inlet pipe of the Honda Fit, then remove the entire fuel pump of the Honda CRV. Be extremely careful to avoid any open flames or sparks during the process. During installation, note that there are two very small oil drain holes on both sides of the fuel pump base, and no oil should drip from them. Since the fuel pump is immersed in gasoline for a long time, the sealing ring is prone to aging. When installing the fuel pump, check whether the sealing rings on the inlet and outlet pipes are aged or worn.
2
1
Share

How to Replace the Wiper Switch Assembly on a Buick Excelle?

During disassembly, first push the wiper towards the base of the wiper arm. Once it is completely detached from the wiper arm interface, pull it out in the opposite direction. Before pulling it out, rotate the movable wiper blade slightly; otherwise, it may encounter resistance during removal. Installation follows the reverse order of disassembly. First, insert the wiper interface into the wiper arm. During this step, the wiper arm clip must pass through the wiper frame. Then, pull the U-shaped connector upwards into the U-shaped clip. If you hear a crisp "click" sound, it indicates that the installation is properly seated. After installing the new motor, it is advisable to first plug in the power connector to test whether it operates normally.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.