What is the hydrophilic function of the exterior rearview mirror?

Is the 2021 Buick Excelle a three-cylinder or four-cylinder model?

2021 Buick Excelle offers both three-cylinder and four-cylinder versions. Additional details: 1. The three-cylinder version is equipped with a 1.3T inline three-cylinder turbocharged engine, delivering a maximum horsepower of 163ps, maximum power of 120kw, maximum torque of 230nm, and a power band between 1800 to 4400 rpm. 2. The four-cylinder version features a 1.5L inline four-cylinder naturally aspirated engine, producing a maximum horsepower of 113ps, maximum power of 83kw, and maximum torque of 141nm. 3. The Buick Excelle is a compact sedan under SAIC-GM Buick, with a front MacPherson independent suspension and a rear multi-link independent suspension. 4. In terms of body dimensions, it measures 4609mm in length, 1798mm in width, 1486mm in height, with a wheelbase of 2640mm, and adopts a front-engine, front-wheel-drive layout.

3

4

Share

What does Nissan VDC mean?

Vehicle Dynamic Control system. Functions of the Dynamic Control System: When the vehicle encounters difficult-to-control situations (such as high-speed sharp turns, slippery roads, bumpy roads, etc.), the VDC system is designed to help drivers safely maneuver the vehicle out of dangerous conditions and return an almost-out-of-control vehicle to its normal driving path. It also prevents the vehicle from reaching a state of loss of control during extreme maneuvers, hence the development of the proactive VDC Vehicle Dynamic Control system that actively manages the vehicle's dynamic performance. When the VDC system is active: The slip indicator light on the dashboard flashes. The moment the car experiences wheel slip, roll, or loss of tire traction, the VDC system immediately intervenes by reducing engine speed and selectively applying brakes to individual wheels, guiding the car back to its normal driving path and thus avoiding dangers caused by loss of control.

10

1

Share

What is the reason for the operation of the main transformer low-voltage backup protection?

The reason for the operation of the main transformer low-voltage backup protection is that the transformer operates statically in the power system. However, since transformers are usually installed outdoors and due to other factors, faults may occur in the transformer. When a fault occurs, the corresponding transformer protection will operate. Here is the relevant information: 1. The reasons for the operation of the transformer backup protection are: short circuit on the high-voltage side of the transformer, short circuit on the low-voltage busbar of the transformer, failure of differential protection due to faults within the differential protection range, malfunction of backup protection, faults in the low-voltage lines, refusal of line protection to operate, leading to overload tripping of the transformer. 2. The role of the transformer: For the main transformer, due to its large capacity and relatively high construction cost in the power station, any fault in the transformer directly affects normal power supply. The use of transformer protection prevents the expansion of transformer faults and minimizes losses.

16

5

Share

What Causes the Chassis to Make Abnormal Noises When Turning the Steering Wheel?

The reasons for abnormal noises from the chassis when turning the steering wheel are as follows: 1. Causes: The steering column lacks lubrication, resulting in high friction; insufficient power steering fluid, aging and hardening of the chassis suspension stabilizer link bushings, or a damaged plane bearing. From the perspective of the steering gear's working principle, many vehicles now feature vacuum assistance, which only reduces the driver's steering effort but does not change the actual load on the steering gear itself. Therefore, an effective way to reduce steering gear wear is to minimize the load on the steering gear during operation. 2. Precautions: Severe aging can pose safety hazards. It is advisable to develop the habit of turning the steering wheel only after the wheels start moving, which reduces friction between the tires and the ground, alleviates excessive load on the steering gear, and prevents abnormal noises caused by excessive wear on the steering linkage system. Continuously turning the steering wheel while stationary not only places a significant load on the steering gear but also accelerates tire surface wear, reducing the tire's service life.

20

4

Share

When to Turn the Steering Wheel While Driving Around a Corner?

Turning the steering wheel at the right moment when making a turn is crucial. For a left turn on a narrow road, turn the steering wheel when the right front corner of the car aligns with the roadside. If the road is wider, you can turn the steering wheel earlier. For a right turn on a narrow road, turn the steering wheel when the left front corner of the car aligns with the roadside. If the road is wider, you can also turn the steering wheel earlier. Below are some precautions for making turns: 1. Always slow down when turning, and avoid turning the steering wheel too quickly to prevent skidding. If the car starts to skid, immediately release the accelerator pedal and turn the steering wheel toward the side of the skidding rear wheel. Once the car stabilizes, straighten the steering wheel and continue driving. 2. Avoid using the brake pedal while turning, especially emergency braking. 3. When turning, coordinate the steering wheel movement with the curve and match it to the speed, ensuring the turning angle is appropriate. Never let go of the steering wheel to prevent the car from veering off course and causing danger.

13

2

Share

Why are the halogen low beams on a new car particularly scattered?

The reasons why the halogen low beams on a new car are particularly scattered: the bulb is not installed properly; the reflector inside the headlight is substandard, which is a quality issue with the light itself. Lifespan of car halogen headlights: Approximately 4 to 6 years, theoretically with a cumulative usage time of about 300 hours. If you drive at night three times a week, the lifespan would be around this duration. However, this depends on the frequency of night driving and the usage time of the headlights (day or night). The biggest drawback of halogen lights is their relatively low brightness, which may not meet the requirements of owners who demand high lighting performance. Their greatest advantage is their low cost and good penetration. Halogen bulbs are the most common type in cars: They operate on the same principle as the incandescent bulbs previously used in homes. The bulb contains iodine and bromine gases along with a tungsten filament. When electrically heated, the tungsten filament emits light. As the filament heats up, it sublimates tungsten, which reacts with the iodine and bromine gases. Upon cooling, the tungsten re-solidifies onto the filament, preventing premature breakage of the tungsten filament.

15

5

Share

What is the hydrophilic function of the exterior rearview mirror?

Is the 2021 Buick Excelle a three-cylinder or four-cylinder model?

What does Nissan VDC mean?

What is the reason for the operation of the main transformer low-voltage backup protection?

What Causes the Chassis to Make Abnormal Noises When Turning the Steering Wheel?

When to Turn the Steering Wheel While Driving Around a Corner?

Why are the halogen low beams on a new car particularly scattered?

What does the brake holder mean?

What brand is the engine jl476zqcd?

What Causes the Right Side to Cross the Line During Curve Driving?

What Cars Are Suitable for Shell 0W-20 Engine Oil?