What is the horsepower of the Yuchai 4108?

1 Answers
MacRuby
07/30/25 4:18am
The Yuchai 4108 engine, with the Yuchai code YC4D, is available in 120 horsepower, 130 horsepower, and 140 horsepower variants. Below are some details about the Yuchai 4108d: 1. Detail one: The four-cylinder engine mainly consists of components such as the cylinder block, crankcase, cylinder head, and cylinder gasket. The basic principle of a four-cylinder engine is to convert the thermal energy of gasoline (diesel) into mechanical energy by pushing the piston to do work through the expansion of gas combustion in a sealed cylinder. 2. Detail two: The engine's power is not equal to the vehicle's power, as there are intermediate losses in mechanical transmission. Additionally, designs that increase the thickness and weight of the vehicle body for safety considerations can also lead to a loss of engine power. Therefore, vehicles equipped with small-displacement engines are not necessarily slower or inferior in performance compared to those with high-power engines.
Was this review help?
19
3
Share
More Forum Discussions

How long after replacing the car's windshield can you drive?

You can drive 12 hours after replacing the car's windshield. The windshield oil film is formed when the glass comes into contact with oil stains and dust in the air and is not thoroughly cleaned, accumulating over time. This can affect the driver's visibility while driving, posing serious safety hazards, and needs to be removed promptly. Precautions after replacing the windshield include: 1. Do not wash the car for three days, and remove the tape fixing the windshield position after three days; 2. Try to avoid driving on excessively bumpy roads; 3. Avoid sudden braking and rapid acceleration; 4. Do not insert parking permits or other cards into the gap between the windshield and the dashboard; 5. Do not drive on highways, keep the speed below 80 km/h; 6. Do not apply window tint within 7 days; 7. Do not open the windows while driving for three days.
19
3
Share

Is driving straight at 30cm from the edge line or a deviation?

Driving straight at 30cm is considered a deviation. Here are the key points to note about driving straight: 1. Smooth start: The driver should start smoothly and maintain a proper sequence of driving operations. 2. Steering wheel: Correctly grasp the steering wheel (mainly operated with the left hand) and use the free play to adjust the driving direction. 3. Gear shifting: Master the timing and method of gear shifting, and be proficient in switching between high and low gears at various speeds (progressive upshifting, progressive downshifting, or skip downshifting). 4. Braking: Apply the brake timely and effectively (anticipatory braking for deceleration).
2
3
Share

What is the working principle of a hydraulic power steering gear?

The working principle of a hydraulic power steering gear is: 1. In the neutral position, the oil from the pump returns to the oil tank through the internal components of the steering gear; 2. During power steering, the oil from the pump enters the cycloidal gear pair through the follow-up valve, driving the rotor to follow the rotation of the steering wheel. Depending on the angle and direction of the steering wheel's rotation, a specific amount of hydraulic oil is directed into the left or right chamber of the oil cylinder, pushing the guide wheel to achieve power steering. The function of the hydraulic power steering gear is to amplify the force transmitted from the steering wheel to the steering linkage and to change the direction of force transmission. The steering gear, also known as the steering box, is a set of gear mechanisms that convert rotational motion into linear motion and also serves as a reduction transmission device in the steering system.
11
3
Share

What Symptoms Will a Car Show When the Fuel Injector is Faulty?

When a car's fuel injector is faulty, it may exhibit the following symptoms: 1. Severe carbon buildup in the engine cylinders; 2. Accelerated wear of the cylinder liners and piston rings, leading to unstable idling; 3. Increased fuel consumption, lack of power during acceleration, and difficulty starting; 4. Excessive vehicle emissions. It is recommended to clean the fuel injectors regularly and promptly. A fuel injector is a simple solenoid valve. When the solenoid coil is energized, it generates a magnetic force that lifts the needle valve, opening the injection hole. Fuel is sprayed at high speed through the annular gap between the needle valve head and the injection hole, forming a mist that promotes complete combustion. The main types of fuel injectors in cars include: diesel injectors, gasoline injectors, and natural gas injectors.
16
1
Share

Why Does the RPM Increase After an Oil Change?

Reasons for increased RPM after an oil change are as follows: 1. Oil is too thick: When the oil is too thick, the engine requires a higher idle speed, known as fast idle. At this time, due to excessive resistance, the fuel injection volume increases. Moreover, during fast idle control, its idle learning value needs to be adjusted upwards. 2. Excessive carbon deposits: High RPM is generally caused by excessive carbon deposit accumulation. Timely cleaning of the throttle and idle speed motor can usually resolve the issue. 3. Overfilled oil: If the engine oil is overfilled or an excessive amount of oil is accidentally added without proper handling, it may lead to oil burning, especially at high RPMs. This increases the engine's workload, resulting in faster engine RPM.
2
5
Share

Which tire does not turn when the car turns right?

When the car turns right, the spare tire does not turn. The spare tire refers to the backup tire of the car, which has the same specifications as the original car tire. Precautions for using the spare tire are: 1. Regularly inspect the spare tire; 2. It should not be used for a long time; 3. The spare tire should not participate in tire rotation; 4. Avoid placing it together with oil products. The replacement tutorial for the spare tire is: 1. Take out the spare tire, jack, and tire wrench from the trunk; 2. Place the jack on the chassis support, slowly lift the car body, and place the tire pad under the car; 3. Use the wrench to remove the bolts of the tire that needs to be replaced and remove the tire; 4. Align the spare tire with the axle and screw holes, and tighten the tire bolts.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.