What is the horsepower of the Reiz engine?

1 Answers
VonHazel
07/30/25 10:27am
The horsepower of the Reiz engine is 193PS or 227PS, varying depending on the model. The specific data are as follows: 1. For models equipped with a 2.5-liter V6 naturally aspirated engine paired with a 6-speed automatic transmission, the maximum horsepower is 193PS; 2. For models equipped with a 3.0-liter V6 naturally aspirated engine paired with a 6-speed automatic transmission, the maximum horsepower is 227PS. The Reiz is the domestic name for the Japanese Toyota MARKX model, which is produced on the same line as the Crown at Tianjin FAW Toyota Plant No. 2, sharing the same chassis and equipped with the same 6-speed automatic transmission as the Crown.
Was this review help?
5
3
Share
More Forum Discussions

Does the Gear Shift Mechanism Need Lubricating Oil?

The gear shift mechanism generally does not require lubricating oil. The specific details of the gear shift mechanism are as follows: Generally, the gear lever does not require special lubrication: Regular maintenance is sufficient. It is generally recommended to replace the transmission oil every 40,000 to 60,000 kilometers. If the ball joint at the base of the gear lever is too tight or stuck, a small amount of lubricating grease can be applied to provide lubrication. Manual transmission gear shifting issues can be divided into the following situations: In winter, low temperatures may cause the gear shifting to feel less smooth. In this case, no action is needed, and the issue will resolve once the vehicle warms up. If the vehicle speed and gear position do not match, you can increase the engine speed by blipping the throttle to improve the success rate of gear engagement. If the gear shift mechanism shows signs of aging, it is necessary to perform maintenance.
9
4
Share

Can a Cruze be parked in a micro parking space?

A Cruze cannot be parked in a micro parking space. The dimensions of a micro parking space are 4.0 meters in length and 2.2 meters in width, while the Cruze has a body length of 4666mm and a width of 1807mm. If a Cruze is parked in a micro parking space, the car body will exceed the parking space, affecting other vehicles or pedestrians, so it is not allowed. A standard parking space, which is 5.3 meters long and 2.4 meters wide, is suitable for parking a Cruze. Parallel parking tips: Park the car 1.5m away from the parking line; when the driver's seat position aligns with the middle of the next parking space, turn the steering wheel fully to the left and slowly reverse; straighten the car's front wheels immediately when the car is aligned, then continue reversing to park smoothly. Perpendicular parking tips: Make full use of the lane width to angle the car as much as possible, which reduces the angle between the car and the parking space, minimizing the need for steering adjustments during reversing. When the car is angled to the point where the driver's side mirror can see the corner of the left-side parked car, start reversing. While reversing, observe the left mirror to monitor the distance between the left rear wheel and the adjacent car. Once your car's left rear wheel passes the front of the left-side car, shift focus to the right mirror to check the distance between your car's rear and the right-side car. After reversing into the space, pay attention to the rear position to avoid hitting the wall. If the parking lot is too dark to see the rear clearly, rely on the reverse radar alerts or align your car's mirrors with those of the adjacent cars.
3
2
Share

What documents are needed to collect the inspection exemption label for someone else?

To collect the inspection exemption label for someone else, you need to bring the vehicle registration certificate, the owner's ID card, and the compulsory traffic insurance policy. The specific details of vehicle inspection exemption are as follows: Vehicle Inspection Exemption: Vehicle inspection exemption means that for vehicles meeting the exemption conditions within six years, the on-site inspection process is waived. Instead, the inspection label must be applied for every two years and affixed to the vehicle as required. Essentially, this exempts the vehicle from on-site inspection. As long as the vehicle meets the national policy conditions, there is no need for on-site inspection, and the inspection label can be directly applied for from the traffic management department. Types of vehicles eligible for inspection exemption: Non-commercial cars and other small and mini vehicles, as well as vans (excluding 7-seater and above vehicles) within six years.
17
5
Share

Where is the battery located on a Baodiao motorcycle?

Here are the detailed specifications about the motorcycle battery: Location of the motorcycle battery: Some are installed under the foot pedal, which can be seen by lifting the pedal mat. Some models have the battery installed under the motorcycle seat, which can be accessed by opening the seat cushion. Current of the motorcycle battery When charging the motorcycle battery, a charger is required. The motorcycle's magneto generates alternating current, which is converted into direct current and stabilized by the rectifier before charging the battery. Motorcycles typically use maintenance-free valve-regulated lead-acid batteries. This type of battery is manufactured using advanced production processes such as leak-proof and high-sealing technologies, requiring no water replenishment during use and featuring a longer service cycle.
13
5
Share

Can you stop midway during the hill starting test?

You cannot stop midway during the hill starting test, otherwise 10 points will be deducted. Precautions for hill starting test: Turn on the turn signal before ascending: Before entering the uphill section, turn on the right turn signal, steer the wheel to the right and drive along the right side of the road. Adjust the direction and straighten the wheel: When approaching the right edge line, slightly adjust the direction to the left, then quickly straighten the wheel to the right, keeping the right side of the car parallel to the right edge line of the road and within 750px of the edge line. Stop near the designated parking point: Slowly approach the parking point. When the right front corner of the engine hood is parallel to the parking line, press the clutch pedal and brake pedal to stop, then immediately pull the parking brake, shift to neutral, and turn off the turn signal.
7
4
Share

How Many Days Does It Take to Receive a New Driver's License by Mail?

Here are the specific details about receiving a driver's license: Standard Mail Delivery: Normally, it takes 3 to 5 days to arrive by mail. If it hasn't arrived, you can call the logistics company to inquire, as the status can usually be tracked. Depending on the method of collection, the time to receive the driver's license may vary in the following ways: 1) Receive it on-site after participating in the oath ceremony, or 2) Collect it in person at the examination center's service window after 2 working days. Mail Delivery Time: Receiving by mail (local delivery takes 2 to 3 working days). Receiving through the driving school (takes 5 to 10 working days). If it exceeds 10 working days, promptly consult the driving school, the examination center's vehicle management office, or the logistics company. Possible reasons include final approval not being granted (incomplete archival materials) or mailing errors (easily caused by the driving school filling in the contact address and phone number on behalf of the applicant; it is more accurate to fill out the express slip yourself).
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.